How to connect the household solar energy at home to the kitchen?

As long as the pipes are reserved during the decoration, they can be connected directly. But I personally don't recommend solar water into the kitchen, although the kitchen water is hot, but it is useless, it is redundant.

Can the water in solar energy be connected to the kitchen to wash vegetables? Can you cook? I don't think so.

The safety of water heater storage has not been tested, but considering factors such as the material of the water heater and the rusty water pipe, it is best not to use it for washing vegetables or cooking for the sake of caution. The water in the water heater is equivalent to tap waterHowever, due to the long-term use of the water heater pipes, there will be dirt accumulation, and it is not suitable for drinking. Water heaters are metallic and may cause pollution if they are not cleaned for a long time.

Of course, you have to ask how the hot water is connected to the kitchenIn addition to directly reserving the pipeline connection, you can also use the more popular way now, that isSolar water heatersIt is connected to the kitchen through the kitchen。Some people may ask, what to do with cold water, then connect the solar hot water pipe to the small kitchen treasure, and then connect it from the lower cabinet treasure to the faucet, so that the hot and cold water can be separated. Although it is a bit more cumbersome to install directly, it still has benefits.

However, will the water quality of the solar water heater be up to standard when it is connected to the small kitchen treasure? Can the kitchen be used directly? The answer, of course, is noAs long as the solar water heater is passed, the water quality cannot meet the standard of kitchen water, and it cannot be used for washing vegetables and cooking

So I still don't think it's necessary to connect the solar water heater to the kitchen water. Hot water in the kitchen is not as clean as sitting directly in a kettle. The above is my personal opinion and is for reference only.

Design a special pipe in the kitchen, connect the solar pipe to the kitchen, and you can use hot water.

Connect the solar water pipe directly to the cold water inlet of the water heater, provided that the water pressure of the solar energy is sufficient.

I haven't really seen this operation, but there will always be a way, think slowly, don't worry.

You can choose to connect a water heater to the kitchen or to the kitchen with a pipe.

If you want to connect hot water to the kitchen, you should prepare a special water pipe to connect it.

In this way, the solar water pipe can be connected directly to the cold water inlet of the water heater.

Specialized pipes can be used to make the connection. It's going to be convenient.

You need to find a professional team to help you deal with this problem

Solar energy has a water pipe, a drain pipe, which is actually a pipe. There is a valve in the solar drain pipe accessory in the bathroom, which can be rotated back to the answer, and the water can be turned on counterclockwise to the maximum, and when the drain pipe comes out of the water, the water replenishment is completed, and the valve is turned clockwise to close.

If the integrated valve is installed, the water valve should be opened, the tap water passes through the upper and lower water pipes, and begins to replenish the solar energy, and the water is automatically closed when the water is full, and the water valve is closed when we use water, and the water switch or mixing valve can be opened.

When taking a bath, if the water in the solar water heater has been used up and the person has not rinsed it off, then you can use cold water for a few minutes, use the principle of cold water sinking and hot water floating, and push out the hot water in the vacuum tube, and then you can take a bath.

If you can't tell who the two are, you can turn them off directly, and then turn on the faucet that can put hot water to this side of the hot water, and then try the two solar water valves, open them respectively, and see which one starts to discharge water when the faucet that puts hot water starts to come out, this water valve is the pipe of hot water, and the other is the pipe of cold water. If the two water valves are opened separately, there is no water flowing out of the faucet for hot water, there is still a water valve before checking the hot water faucet, and if there is one, it may be that there is no water in the solar energy, and the two solar water valves can be opened at the same time, at this time the faucet for hot water should have water coming out, try to close a water valve, if there is no water flowing out of the faucet for hot water at this time, then this water valve is in charge of hot water. After distinguishing the inlet and cold and heat functions of the two solar water valves, after each use of water, open the cold water inlet valve for the solar energy, the water is full, and the water overflows at the solar energy to close the cold water valve (there is no automatic water equipment installed, only 20 minutes can be used), the hot water valve can be opened all the time, or it can be opened before each water use, and then turn on the faucet that opens the hot water.

According to the design specifications of hot and cold water pipes, the left is the hot water pipe, and the right is the cold water pipe.

1. Connect the solar energy and the water heater outlet with tee! The solar outlet in front of the tee and the outlet of the water heater each have a valve!

2. You can connect the solar outlet to the water inlet of the water heater, and use hot water from the water heater's early outlet! In this way, when the solar water is hot enough, turn off the water heater and take a bath directly with the solar water! In winter, you can use a water heater when the solar water is not hot, and the solar water is living water, so you don't need to change the water when you use solar energy in the future!

You can't use rollers to cook.

Whether it is a solar water heater, a gas water heater or an electric water heater, most manufacturers will indicate "not to eat" on their product manuals. Although the water entering the water heater is clean tap water, the materials of the water heater's supporting components (such as metal pipes, etc.) may often contain some harmful poisons such as lead, cadmium, manganese, arsenic, etc.

In addition, the temperature of heated water is generally between 40 and 70, which is suitable for the reproduction of bacteria and viruses. Moreover, water heaters with water storage function have a water storage tank, and the water that cannot be used up is stored in the tank, which will breed bacteria and pollute the previously heated water after a long time. So the water in the water heater is not drinkable!

1. When using a gas-burning water heater in winter, the water temperature may be low, and the water volume should be reduced at this time. When the water heater is finished, the gas source must be turned off to avoid accidents caused by gas leakage. Check whether there is leakage in the interfaces of the gas supply pipeline from time to time, whether the rubber hose is in good condition, whether there are cracks in the aging of wheel leakage, and once found, it should be dealt with and replaced in time.

Replace the battery regularly, generally once every 4 months, but depending on the durability of the battery, try to choose a large-capacity battery.

2. Before use, determine the position of each function knob according to the operation instructions. After opening the water valve, the water heater will automatically ignite and flow out hot water, if the water heater cannot be automatically ignited after opening the water valve, we should immediately close the water valve, check whether the air source is open, the water pressure, whether the pulse igniter is working, and the battery will also affect the ignition of the gas water heater.

3. Avoid improper operation and make the water heater only produce cold water, especially the water heater with the function of cold and hot water conversion. When the water heater is turned back on in about 10 minutes after being suspended in the middle of use, the hot water coming out may be hot, so you should let the hot water accumulated in the water heater for a few seconds before bathing, otherwise it is easy to burn**.

A: Hello, dear, it's on the wall. Solar water heaters are not allowed to be placed on the ground.

Because the leakage of the solar water heater is based on its own water pressure, it naturally falls into the water, so if it is placed on the ground, then the solar water heater cannot be normal. Therefore, the solar water heater must be placed on the roof of the house before it can be used for normal hot water. It can also be placed in a high place.

A solar water heater is a device that uses solar energy to heat water, and by delivering hot water to the household tap, it can be used by households. So if the solar water heater installed in the kitchen can heat enough water liters, then the kitchen water is hot.

Nowadays, with the rapid development of our society, people's pace of life is getting faster and faster, and at the same time, the products of science and technology development have also made our lives more and more technological. Today I will introduce to you - household solar water heater.

The power generation principle of household solar water heaters is summarized in 4 words, photovoltaic power generation. The system of household solar energy is mainly composed of photovoltaic array, solar charge and discharge controller, battery pack, off-grid inverter, and DC load and AC load 6 major parts. In addition, it is necessary to have an inverter (used to change the current) when the solar energy is running.

So how does it work? First of all, the photovoltaic dust array converts solar energy into electricity when there is light, and is powered by the solar charge and discharge controller, and at the same time charges the battery. When there is no sunlight, the solar charge controller supplies power to the DC load from the battery, and at the same time the battery supplies power to the independent inverter, which in turn supplies power to the AC load through the inverter.

Nowadays, in the case of energy shortage, home solar energy is becoming more and more popular among the masses. That's because the investment in household solar energy is small, the construction is fast, and the area is not large, so we still don't know how to use it, so let's give an example of how to use a household solar water heater.

1.First of all, you need to take your family to the mall and choose a home solar that suits your own rotten limbs. During the purchase process, pay attention to ask about its brand and warranty period.

2.After paying and purchasing the desired home solar energy, there will be professional workers to help our customers install it.

3.After installation, you will find that there will be a control surface in the room with temperature and water level on it.

4.If you feel that the water level is too low, click on the water and the sub-water level will go up. At the same time as the water level comes up, the water temperature will drop, and if it's a sunny day then you don't have to worry, the temperature will rise with solar power.

5.Seeing this, some friends will ask, what if it's a rainy day? Generally speaking, solar energy can last for 2 to 3 days when it absorbs enough sunlight, and if it is rainy, we can connect the power supply to heat the water.

This perfectly solves the situation that there is no sun in the home solar on a cloudy day.

The above is how to run the solar water heater for home solar water heaters introduced today, how to use it, and finally, remind you that we must regularly check the wiring problems at home, as well as the aging of electrical appliances, so as to extend the service life of electrical appliances!

You can get it for free