How to use PS2 change the disc and return to the hot start button on the home screen??? ）

Please see the instruction manual!

Plug in the 'Power' - the 'switch' on the back of the machine - press the 'tray button' (blue light) - put it like a game 'CD' - press 'rest' (green light) and the word 'SCEI' and the 'PS2' logo will appear until the game starts!

Then press the 'tray button' once – take out the disc – 'long' press 'rest' to release (green turns red) – turn off the main switch behind – unplug the power cord!

Function: Put the tray into the tray first, press and hold 'REST' to turn red - press and hold 'REST' for about 4 seconds, release!

After the power is turned on:

The red light is off, and the green light is on.

After the shutdown state is put into the disk, press reset to turn it on.

Press and hold reset to turn it off.

When you need to change the order, as long as you do not press open a position in the state of reading the order, you can press reset after the order change.

All of the above is true.

But I think it's a bit expensive to always be so shaky.

Turn on the switch on the back and turn on the red light.

Press REST to turn on the green light.

When the screen is turned on, press the tray button to open the warehouse door to change the game disc or *** and then turn the refrigerator door. Belch. The door closes.

I choose the b with a handle....

There's a disc pattern.

Press. The fork went in.

Is the main screen the opening screen of the game? That's because you have the habit of pressing all the buttons together after fighting, so it's because of the reset, right?

If it jumps back to the boot screen, it should be a poor power contact.

That's a must. I always pressed the reset button, then opened the disk compartment, changed the plate, and then used the handle to go to the settings to read the disk!

A must-have ......If you don't change the game, there are many games that you can continue to fight for a long time without reading the board.

That's for sure, unless you have a burner, ah.

1 The price is okay.

2 ps2 is 2 legs.

3 Changing the plate is to press the key (that is, the one with the light) The green light turns into a red light, and the disc inside does not rotate, you can press the lid to change the plate.

4 It seems that it is difficult to distinguish between the assembled and the original in appearance Of course, it is impossible for people to disassemble it for you to see when you buy it, so I think it is only by the feel.

5 Buy it if you have special requirements for the picture. But personally, it doesn't seem to be much better. You'll feel like the graphics aren't good because PS2 is a console that's been obsolete for a long time.

PS3 is almost eliminated, okay. What else can you count on.

Open the lid directly and change the dish. It will affect the service life of the bald head.

PS2 You Hey, I regretted it when I bought it. This is not the age of the age. If the heat of your house is not put underground, if there is dust, you must wipe it.

1.It's a good price, cheaper than when I bought it.

2.Power issues.

3.When I change the plate, I just open the lid and put the plate in again, and press restart.

4.The high imitation is obviously light, and it is still small, and the leather of the R3 button of the joystick is not good.

5.You make it clear whether it is dark or divided.

To add, don't read the disk, remember the disk from time to time. If you can plug it in, you must definitely match the color difference line.

Nice**.

You can change the plate any way.

Boot method:

E1 Step 1: Turn on the power switch behind the main unit.

E1 Step 2: Press the eject button (exit button).

E1 Step 3: Put in the disc.

Step 4 of e1: Press the eject button (exit button) to close the position, wait for the disk to be read, and play the game.

Note: The fourth step is to look at the personal host direct reading situation, the general old direct reading needs to press the reset button (reset button) to play the game, the new direct reading option can be played directly in accordance with the fourth step.

In the game, you need to change the game method:

E1 Step 1: When you are not reading the disk in the game (or press the start button in the game).

E1 Step 2: Press the eject button (exit button).

E1 Step 3: Swap the game you want to change.

Step 4 of e1: Gently press the reset button (reset button).

Note: Don't press it for too long, == or it will be in standby mode.

Shutdown Method (Important):

E1 Step 1: When you are not reading the disk in the game (or press the start key in the game).

E1 Step 2: Press the eject button (exit button).

E1 Step 3: Take out the CD.

E1 Step 4: Press and hold the RESET button (reset button) for three seconds, then it will automatically enter the standby state.

Note: Just press and hold it directly, regardless of whether the disk bin enters or not, because when it enters the standby state, the disk bin will automatically be earned. Don't let the bin sink in first, then press and hold it to enter standby mode so that the bald head will scan it again.

E1 Step 5: Turn off the power button on the back of the console.

e5 Step 6: Unplug (nonsense).

Note: Some players don't want to leave the disc in the console for a while, and then turn it off to facilitate the next boot, which will only increase the aging of your bald head; Some players say that this can be dust-proof, which is simply unreasonable, and I hope you can have a good way of playing and make your console live a little longer.

As for the operation of the memory card, as long as you boot it without putting it in the disc, you will enter the interface of selecting the memory card management, which is very simple.

On: First plug in the power plug (nonsense), turn on the power switch on the rear of the fuselage (the front indicator light of the fuselage is red), and then press the blue exit button in the lower right corner of the front of the fuselage (the indicator light turns green), put the disc on, and then press the green start button on the top to OK.

Off: Press the blue exit button, take out the disc, press the blue button again, close the hatch, then press and hold the green start button for about a second and then release it (the indicator light is red), turn off the power button behind the fuselage, and then pull the plug to over.

Use of memory card: Operate in the above boot order without putting the disc (press the green key directly after the power is turned on) to enter the menu control interface, press first"x"Select the first item, enter the memory card operation interface, and then press the X key to enter to see your game save, use the arrow keys to select the game save you want to delete and press"x"key,Enter an interface with two options,The top is the copy key (in the case of two memory cards,Copy the archive in one of the memory cards to the second memory card),The bottom is the delete key,The rest doesn't need me to say

You should be a host after 7w, right?

In fact, there is no special order, mainly it is recommended that you leave a disc in the machine when you turn it off, which is better for the machine.

If you want to delete the records on the memory card, you can enter the memory card management screen (first item) as long as you turn on the disk without putting the disk on. The European and American version of the machine is determined to be X. The Japanese version is o. Once inside, you can delete the record.

I don't pay attention to it, as long as I don't plug and unplug the memory card casually.

There are too many specific answers, my ps2 has been tortured by me for more than 5 years, and it's okay, I paid attention to it at first, and then I used it casually. However, there are still problems to be aware of:

1. It is best to take out the disc after shutting down, and do not keep it in the machine;

2. Try to avoid plugging and unplugging at each connection when booting, especially do not plug and unplug the memory card when storing records;

3. If it is an old PS2 model, it is recommended to change the placement method regularly (vertical or horizontal, upside down has not been tried), which can reduce the occurrence of sinking or displacement of the bald head.

The motherboard burned. Your computer may not even turn on.

Plugging it in and out like this should be fine. Because there is no data transmission like a USB flash drive (and there is no external power shock).

When something happens, it's a big deal, and the motherboard is burned.

You can buy a 45-in-1 tool tray and you can use it.

After shutting down, then put the disk, if not, turn it off and pull out the power and then turn it on.

I can teach you how to put the computer archive to PS2 The U disk recognition rate is very high.

Does the landlord now put a golden disc on any game disk? If so, it means that the machine itself has a quality problem, and it should be taken to a professional maintenance master.

You pull out the memory card and try it back on.

When you say you want to copy an archive, it may be a memory card problem.

Only 3W and 5W thick machines can be equipped with hard disks, and hard disks are ordinary computer hard disks, and you can copy the game directly to the hard disk.

And don't believe what people say9W is not good,9W and 7W are the best hosts,And the 9W optical drive is an ordinary *** optical drive,If it's broken, you can change it to other ones casually.

Now there are still people who take ps2 to read ***,Super appreciate the bald head,You can also read it,But it depends on the model of the change chip,Generally, put the disc in the shutdown state,Then press and hold reset until the TV screen appears black,It's OK......Isn't it only a few hundred dollars for a ***?