How to disassemble Huawei P8, how to disassemble Huawei P6 back cover

It is not recommended to disassemble the phone without permission, so as not to damage other parts of your mobile phone, which will affect the warranty service. If you have a problem with your phone and need to be repaired, we recommend that you back up the data in your phone in advance and bring the warranty certificate to a nearby customer service center for repair

2. You can log in to Huawei's official website on your computer**, and click "After-sales outlets" to query the address at the bottom of the Huawei** page.

HUAWEI P8's battery replacement and disassembly**, the difficulty is medium.

Model: Huawei P8

Tools: pentagonal screwdriver, suction cup, crowbar, tweezers.

Step 1: Shut down the phone and take the card tray.

<>Step 2: Remove the back cover, remove the tail screw, and remove the back cover with the assistance of the suction cup.

<> remove the screws. <>

Remove the fixing iron.

Pry open the battery cable.

<> pry off the headphone jack cable.

Pry off the front camera cable.

Take out the front camera.

Step 4: Remove the signal cable.

Remove the motherboard screws.

Pry off the vibrating motor cable.

Disconnect the antenna. <>

Pry open the LCD link cable.

Disconnect the signal cable.

Remove the signal cable.

Step 5: Remove the motherboard.

Remove the screws. <>

Remove the motherboard. Step 6: Disassemble the speaker module.

Pull up the speaker cable, be careful, it is sticky, it is better to have a heat gun to blow it.

Remove the speakers.

Step 7: Remove the battery.

<> pry out the battery. <>

it! The above is the replacement of the Huawei P8 battery**.

The correct way is to remove the U-shaped end cap at the lower end first, and then push the back cover back to come down. However, most people may not be able to remove the U-shaped end cap, so carefully pry it open from the opening with a small knife.

After removing the back cover, use a screwdriver to restore the buckle to its original shape (under normal circumstances, the user will press it when he sees the seam, so that the buckle will be bent and deformed, and if it cannot be buckled, there will always be a warped gap). Then put it back on.

When installing the back cover, first carefully lift the U-shaped end cap at the lower end (this cover has a certain elasticity), then insert the lower end of the back cover into the U-shaped end cap, and then push the back cover up after entering smoothly.

I managed to restore the back cover in this way, and the tool was a knife. Complete.

The Huawei P6 phone has an all-in-one body, a non-removable battery, and the back cover cannot be removed.

If there is a problem with the phone and you want to remove the back cover, it is recommended to go to Huawei's official after-sales service center to solve the problem, and you can find the information of the local service center in the technical support section of Huawei's official website.

It is better not to disassemble it for non-professionals.

In general, it can't be dismantled.,To put it bluntly, it can't be dismantled.,It's the same as Apple.,Didn't you find that P6 and Apple 5S are almost the same? It's too similar in design.

Tools required for dismantling: screwdriver, tweezers, spudgers, suction cups, picks.

Step 1: Remove the tray and remove the tray.

The card tray is a two-choice design [sim1: nano-sim; sim2/tf：nano-sim & tf-card】

The front end of the card tray has a T-shaped foolproof design to avoid the card tray being unable to be removed and damaging the SIM SD contact terminal.

Step 2: Remove the back case.

Remove the bottom two pentalobe screws.

The screen assembly and back case are fastened in the form of screws and buckles.

Screen assembly and back shell.

Disconnect the fingerprint recognition module BTB

Step 3: Separate the motherboard & front and rear cameras.

1.The bottom of the Huawei P9 uses the same pentagonal torx screw as the iPhone.

2.First of all, turn off the machine before disassembling it and take out the card tray.

3.First of all, turn off the machine before disassembling it and take out the card tray.

4.Use a suction cup to suck the screen open, and if it can't be opened, it can be slightly heated and assisted by a plastic spudger.

5.The screen is detached from the back cover, and we can see the fingerprint recognition module inside.

The disassembly process of this mobile phone is no different from other mobile phone disassembly, the main thing is to separate the back shell and screen of the mobile phone from each other, some cables must be removed slowly, and then there are a few places that need to be disassembled to remove the battery first.

Generally, there are this kind of disassembly tools on the Internet, if you want to disassemble the machine, you still have to learn more majors, and then you must have a set of tools.

Well,It's not recommended that you disassemble the machine,Under normal circumstances,HuaweiP9,You can use it yourself,If you want to disassemble the machine for inspection or repair,Then your best words,It's to find someone in the repair shop。

Huawei P9 mobile phone disassembly needs to open the back shell first, and it is best to ask a professional mobile phone repair master to disassemble the phone.

In the process of disassembling this model of mobile phone, there are no requirements for disassembling cars and other models, mainly to use special tools that are ready for storage and disassembly.

Then during the disassembly process, pay attention to remove the screen motherboard and back shell first.

Specifically, you can find the relevant technicians, and then let them directly help you operate, don't operate, otherwise it may be damaged.

I don't understand why you want to collect, if there is any fault in the phone, don't disassemble it at home, you should go to a professional repair shop.

Dismantling the machine needs to go to the repair shop to deal with it, and there is no warranty if you disassemble the machine yourself.

Huawei's mobile phone disassembly method is basically the same,If you don't understand,It's best not to disassemble it yourself,In case you disassemble it, it will be troublesome if you can't install it back。

In this regard, professional tools must be used, and only in this way can it be disassembled, otherwise it is easy to have problems in the disassembly.

This is a direct need to go to the repair shop, where they have professional disassembly people.

Huawei P9 disassembly process: Tools required for disassembly: screwdriver, tweezers, crowbar, suction cup, and pry blade.

Step 1: Remove the card tray, take out the card tray, choose two out of three designs [sim1: nano-sim; sim2/tf:

nano-sim & tf-card]

If you don't have maintenance experience, don't disassemble it yourself, it's best to ask a professional repairer to disassemble the machine, whether you plan to change the screen, or replace the battery.

Disassembly is not recommended.

Personal disassembly will break the phone because there are no special tools.

2. You can check the address of after-sales outlets at the bottom of the official website page of Huawei**.

Turn it off and use a T2 screwdriver to unscrew the two screws underneath your phone.

Huawei P8 battery replacement steps.

2. Use the card removal pin to remove the SIM card slot and memory card slot.

Huawei P8 battery replacement steps.

Attach the suction cup to the underside of your phone's screen, then pull the suction cup up so that the screen is detached.

Huawei P8 battery replacement steps.

Use a Phillips screwdriver to unscrew one of the screws on the protective cover, then remove the protective cover.

Huawei P8 battery replacement steps.

Use the triangular paddles to pry open the battery cable clasp.

Huawei P8 battery replacement steps.

Pull out the bottom adhesive of the battery.

Huawei P8 battery replacement steps.

Use a spudger to remove the battery.

Huawei P8 battery replacement steps.

Attach the double-sided tape to the location shown.

Huawei P8 battery replacement steps.

Install the battery, then press the battery cable clip.

Huawei P8 battery replacement steps.

Put the protective cover back into place and use a Phillips screwdriver to screw the screws.

Huawei P8 battery replacement steps.

Close the back cover of your phone and install the SIM card slot and memory card.

Huawei P8 battery replacement steps.

Use a T2 screwdriver to screw the two screws at the bottom of the phone, and you can turn it on and use it normally.

Huawei P8 battery replacement steps.