-
Anonymous users2024-02-051. Be sure to check the computer connected to the network cable socket first, and see the network settings of the computer, whether to use a static IP address or a dynamic IP address.
2. Record the IP address of the computer and set up your own router.
3. According to your description, your network should not need to dial up separately, and the network line will be connected to the LAN port of your router. Don't get it out of the wan's mouth. Your network structure should look like this, and you can see if that's the case.
Photomodem - main router - computer A or photomodem - computer A
— Computer B — Computer B
The second premise that there is no main router is that the optical modem has its own routing function, otherwise it must need a router.
If the IP address of the computer you can access the Internet is, then you need to set the intranet IP address of the router you bought yourself in this address range, but it cannot be the same as the default gateway IP address.
Then connect to the network.
Photoelectric modem - main router - new router (LAN port) - computer C (the IP address is automatically obtained and the IP address of the main router is in the same network segment) |Computer B
The new router of computer A uses the LAN port for connection, not the WAN port.
-
Anonymous users2024-02-04The cat-to-route seems to be wired The other thing is to set the Internet connection mode Look at your settings Maybe your cat has settings.
WiFi only needs to set the SSID encryption method, the secret key, and turn on the DHCP service, and if your cat has a broadband connection mode, the WiFi only needs to set the route, which is a dynamic IP or fixed IP login.
-
Anonymous users2024-02-03The modem is connected to the wanBoth rooms are connected to the route, which is correct. It is estimated that the settings are still wrong, it is recommended to restore the factory and re-set it.
-
Anonymous users2024-02-02I think it's complicated.
It's just a normal connection.
1.Plug the network cable into the WAN port of the modem and router.
2.Plug other computer network cables into the routing LAN port.
3.Log in to the route settings screen.
4.If you want a password, set the WAN port parameters to fill in the password, and set the dynamic IP mode for those that are directly obtained.
-
Anonymous users2024-02-01The network cable from the cat to the WAN port of the router The other 4 ports can be connected to the computer one by one, and the router must be set to dial-up Internet access or static IP, and it must be set up to access the Internet.
-
Anonymous users2024-01-31The wireless router cannot access the Internet, it is a problem with the settings, and the solution is as follows:
1. First of all, in the lower right corner of the screen on the computer, observe whether the 'local connection' is normal: the local connection icon will appear 'exclamation mark'.
At this time, please open the computer browser, enter the initial IP address of the router in the address box' and press the enter key to link, as shown below, enter and password to log in to the router management. (Please refer to the bottom of the wireless router for the initial IP address and login password of the wireless router).
<>2. Enter the wireless router management webpage and click 'Setup Wizard' to help you complete the basic router settings faster.
Click 'Next'
3. As shown in the figure below, if you don't know how to connect, check 'Let the router automatically choose the way to access the Internet';
If you are using 'broadband dial-up' Internet access, with or without an ADSL demodulator, choose PPPoE dial-up (ADSL Virtual Dialer).
If you're coming from a shared network, or from a neighbor's network cable branch, choose Dynamic IP;
4. If you select 'PPPoe Dialing', after entering the broadband and password, the following figure will appear, which is the wireless network setting:
2) The connection password must be set in the wireless security option: the password is more than 8 characters, and WPA2-PSK is the security encryption technology.
Click 'Next' when you're done
6. As shown in the figure, the last step is to click 'Restart' the wireless router. After restarting, observe again whether the exclamation mark of the 'Local Connection' icon in the lower right corner of the computer desktop disappears, and if the 'Local Connection' shows Internet access, it means that the connection network is normal.
You have restored the factory settings of the router, of course, you can't access the Internet, because the information in the router is also erased when you restore it. If you use win's built-in dial-up or Internet starry sky to surf the Internet, you can't connect to the router, directly to the cat. >>>More
First of all, make sure how you connect. The cat comes out of the line and connects to the WAN port of the router, and then turns on the IE input or depending on the router manufacturer, there is in the manual). >>>More
It's all the same, you take the optical fiber cat to borrow the WAN excuse to follow the line to the router on the computer to set up, and follow the wizard to enter the dial-up account password. If you have a question, thank you.
From the LAN port of the main router, a network cable comes out and connects to the LAN port of the wireless router, log in to the wireless router, turn off the DHCP service of the wireless router, and set the IP address of the LAN of the wireless router, which should be different from the LAN IP of the main router.
To put it simply, the router is used for automatic dialing, as long as your router has a few jacks, it will work, if there are only 2 jacks (one is ** line, one is network cable) then it is terrible. >>>More