There s a problem with booting.,What s the problem with booting.

There may be poor or damaged hardware.

1.The simplest discharge is to remove the battery, short circuit the positive and negative poles of the battery clamp with wires, and then replace the battery.

2.Clean the headers from dust and oxide on the motherboard.

Then reboot.

Problems with the power supply or motherboard on the hardware will definitely have an impact on the computer, not knowing the warranty.

No, I recommend that you report it as soon as possible.

Good luck.

Do you mean that the console and the monitor go off together, or do you mean that the monitor goes off?

If the console is still working, but the monitor's indicator light is not.

I think that's a problem with the graphics card.

If it's the host that's not working.

Then go get it and fix it.

You can't fix it yourself.

That should be a problem with the motherboard.

I believe that ordinary questions will not be difficult for you. This possibility is the greatest contact defect. Take it to the place where you bought your computer and get it overhauled. If the hardware is broken, you can only fix it. The software can also do it yourself.

It doesn't matter if it's turned off, as long as the power supply in the case doesn't stop, it's fine.

I've also encountered such a situation before, first of all, change the system, and then say, if it doesn't work, it should be a hard disk, and if it doesn't work, go and look at the motherboard.

Normal, no need to rush. The situation you said is the same as mine, my computer has been working normally for almost 3 years.

You're using a PC from Dell's recent years! If so, then there is no problem, it is normal.

If it's in 1-2 seconds, it's normal, so don't worry.

Hello:——1,One of the reasons: the data cable of the hard disk, or the power cable is not in good contact or falls off, and the operating system cannot be recognized.

The operating system is corrupted and the computer cannot enter the operating system. So the main interface of the BIOS will appear.

Practical arguments: In a normal computer, unplug the data cable or power cable of the hard disk, and this screen will appear.

CheckIs the hard drive's data cable or power cable well connected? Is the system damaged? Countermeasures should be taken according to the situation.

To turn on the machine, press del or F1, F2 (the setting is different for each manufacturer).

will enter this BIOS mode.

Reboot, or press F10, press Enter. Can.

How do you press the starter? Leave it alone when you turn it on, he'll start it himself!

This is the BIOS setup interface, just press ESC to exit normal boot.

Enter this interface when you turn it on, maybe the F2 button or the del button is broken.

Try to run"c/windows/system32/,nvstartup"Accidents happen.

This is the startup item of the nvidia graphics driver, which can be uninstalled and reinstalled. Or remove the items found in the startup items. To do this, start, run, type msconfig, find startup, and then remove the tick in front of the bumper item and press Apply.

2) Close the startup item of the faulty graphics card.

Startups can be turned off (autostartups can be found in several of the following ways).

2. Click"Get started"Run Enter after entering msconfig and click Enter"Launch"Look for the option of the boot prompt inside, remove the previous tick after finding it, and press OK to apply. After restarting the computer, a dialog box will appear when you boot up to the desktop, add a checkmark to the dialog box, and you can confirm it.

3. Remove the auto-start item.

Start running the input regedit back to open the registry and be sleepy in the morning.

hkey local machine software microsoft windows currentversion run] on the right, hkey current user software microsoft windows currentversion run] on the right, see if there is an option you are looking for, if there is a deletion, restart the computer.

DLL files can be searched on the Internet, and a lot of them can be searched.