Yesterday the new car went to pull the highway, does it have an impact on the car 5

Pulling the speed refers to the speed, and it is enough to use the 2nd throttle to the end for a few minutes. When you pull the throttle, you will tap it, and the acceleration will feel better.

Suggestions: 1. If your car is only driven by yourself for a long time, it is recommended that you pull the high speed by yourself, and if you change the person who has driven it, the performance and feeling of the vehicle will change.

2. You don't have to drive at high speed, you are a manual gear, it is recommended to drive at low gear and high speed, generally speaking, it is 3 gears, add the throttle to 4000 rpm, keep the speed for about 10 minutes, let the engine adapt to high speed operation, there is no need to take risks. Risk 1: Needless to say, the landlord also knows the dangers of speeding, risk 2:

If you have cameras along the way, you may be caught in a violation, and if you are forced to slow down, you may not be able to pull the highway very well.

3. It is recommended to do the first insurance after connecting the high-speed. Because when the engine runs at high speed, the engine will produce some metal chips in the lubricating oil, which will cause great damage to the engine, and the oil should be replaced after pulling the high speed. If you do the first insurance and then pull the high speed, then it is not good for the metal chips to still exist in the engine.

You pull the highway a little early, only 2300kmIt should be after the expiration of the run-in period to pull the high-speed, and then go to the first insurance.

It is best to resist the throttle and keep the engine running at high speed for about 10 minutes.

After the run-in, pull the high speed, and in the future, you will feel that the car is very thorough. It feels cool to drive.

It is not recommended to run at high speed for new cars: 1. First of all, after the initial running-in of the engine of the new car, the operation between the parts tends to be coordinated. At this time, the high speed of pulling and pulling allows the engine to keep running at high speed for a period of time, which can check the extreme working condition of the machine and expand the bearing range of tensile, compressive, collision and torsion resistance of the parts and materials;

2. Especially when working at high temperatures, the strength of metal materials can be greatly improved, and the overall performance of the parts can be further enhanced. Therefore, it is not false that the new car can improve the engine's performance by pulling the high speed appropriately, and the reason is here;

3. On the other hand, pulling the high speed also has a considerable effect on cleaning the oil circuit and cylinder of the engine. The reason is that when the engine is running at high speed, the oil supply increases, and the flow rate of the fuel also increases, which helps to wash out the dirt and impurities in the oil circuit, so as to achieve the effect of staring at the stupid cleaning;

4. And due to the high-speed movement of the piston, the temperature in the cylinder is higher, and the flow and speed of the air flow in and out of the valve are also very high, and the combustion will be more sufficient, which is conducive to removing the carbon deposits of the valve and making the blocked passage smooth. Therefore, it is self-evident that the power of the engine will be enhanced after pulling through the Kai Accompany high speed.

Millions of car purchase subsidies.

The new car runs at high speed, the engine works at high speed, and the mechanical wear is the largest, and the first tank of oil is the most metal chips and impurities, and the oil with a large number of debris will greatly increase the loss of the engine, and even cause abnormal wear.

In terms of run-in effect, ordinary urban roads are the best. As there are many road intersections in urban areas, there are high-speed, low-speed, starting, braking, and shifting gears when driving, as long as the action of starting, shifting and braking is soft, the engine speed is controlled under the maximum speed required by the manual, and the ideal run-in can be completed after 1000 kilometers. Let's talk about the impact of high speed on a new car:

1. Tires are prone to puncture: continuous driving, the temperature of the landmark at high speed is exposed to the sun, the temperature can be imagined, the car tires are seriously worn, and the friction between the tires and the ground will be weakened after driving for a long time, and even due to the high temperature, it is possible to cause a puncture. It is quite dangerous to not handle a puncture at high speed.

Drive for a few hours and take breaks to cool down your car.

2. Loss of function of the cooling system: After running on the highway for a long time, the most likely problem for the vehicle may be the cooling system, the common "boiling" phenomenon, resulting in the blockage of the water tank and the difficulty of cooling. Especially for old cars that have been used for many years, it is not good that the temperature is too high, and the cooling and lubrication effect is poor and causes the cylinder to be pulled, thereby damaging the engine.

And it can worsen these conditions, the most serious of which can lead to the car being too hot and bursting the cylinder. If there is a failure that the engine cannot start due to high temperature in the middle of the road, it will be a big trouble.

3. The engine will be slippery and leaking: The first thing that comes to mind when the engine leaks oil is, what should I do if I encounter fire? Because of long-term driving, the engine has been in a high temperature state, fuel consumption will increase, so that the engine has been in the high load stage, resulting in gasoline leakage from the engine, and even the chassis of the car may be stained with oil, if it encounters an open flame, the consequences are unimaginable.

Not only will it lead to abnormal consumption of engine oil in the vehicle, but the oil that leaks out may be ignited by high temperatures, resulting in spontaneous combustion of the vehicle. Therefore, before driving at high speed for a long time, the state must deal with the oil leakage of the engine in time.

4. Affect the output power of the engine: the engine of the car runs for a long time and the temperature rises, which directly affects the power of the engine, which can easily damage the engine and reduce the service life of the engine. After several hours of continuous running, the overheated macro exhaust triggers the ECU's overheating protection, which automatically reduces the engine output.

When the overheat protection is activated, the engine output is affected, which minimizes the performance and power of the vehicle.

Photo by Chen Fang of Pacific Automobile Network1).

Liubulang on the problem of pulling high-speed, the key to pulling high-speed is to increase the speed of the engine in each gear, rather than simply increasing the speed, pulling the high-speed is to make the engine computer record and store the data of the high-speed operation of the brother-in-lu engine, after the engine pulls the high-speed, it is beneficial in terms of speed increase and fuel saving. Vehicles equipped with automatic transmissions and continuously variable transmissions can use the gear below the D gear (manual mode of manual integration) to pull the high speed, for example, the lock belt is set to drive to a higher speed, the engine speed can be increased to 3,000 rpm or 4,000 rpm, and each gear can continue to run for 3-5 minutes, and the oil filter should be changed at the 4S shop as soon as possible after pulling the high speed. Regularly running at high speed can not only play a role in saving fuel, but also play a role in slowing down the formation of carbon deposits and removing carbon deposits.

Many consumers will ask about the new car type.

Is it necessary to pull the high-speed bai, while pulling the high-speed in the du

When is the best time? How exactly does dao pull? Let's explain this problem below:

1.When is the best time to pull a high speed?

First of all, you need to pull the high speed after the first insurance, and remember not to drive at high speed before the first insurance, and do not rush to refuel and brake. Try to keep the speed below 100 km/h. Of course, some manufacturers will specifically mark the use of new cars in the vehicle manual, for example, BMW series models have been marked:

The new car can travel at 4500 rpm and 140 km h.

2.How to pull the high speed?

The key to pulling the high speed is to increase the speed of the engine in each gear, rather than simply increasing the speed, the high speed is to make the engine computer record and store the data of the engine when the engine is running at high speed, after the engine pulls the high speed, it is beneficial in terms of speed increase and fuel saving. Vehicles equipped with automatic transmissions and continuously variable transmissions can pull high speeds with the help of a gear below the D gear (manual mode is available with an automatic manual system). Each gear can be pulled to a high speed for a short time, and the cumulative pulling time is about 20 minutes.

Do you have to pull the high speed of a new car?

It is not recommended to pull the high-speed after the new car, and it is better to pull the high-speed after the first insurance!

A must-see for newbies! Why do new cars have to pull the highway? When and how to pull the highway?

Pulling the high-speed generally means that the new car has passed the run-in period to get on the high-speed to pull the car. The idea was to get the new pistons and camshafts inside the engine to try to work fast for the first time, so that they had better intimacy with each other. In addition, the gears in the gearbox can be rotated at high speeds, so that the joint between the new gears and the gears is smoother.

By pulling the high speed, the car can have good power in the future driving and smooth gear changes.

If the road conditions allow, I drove to 140km h or even higher with the top gear on. This can't be called pulling high-speed, at best it can be called driving high-speed. This not only fails to achieve the significance of pulling the highway, but also wastes gasoline in vain.

As the gears increase, the engine revs lower and lower. When in the highest gear, if the vehicle is at a speed of 100 km/h, the engine speed is roughly 2500---3000 rpm. The pistons in the engine are working normally with the largest gears in the gearbox at the highest gear, without allowing them to work quickly.

The real meaning of pulling high speed is to pull the high speed of the engine. Pull the speed of each gear to more than 5000 rpm, so that the piston and gear can try to work at high speed and achieve the meaning of pulling high speed.

It should be noted that when pulling at high speeds, when the speed of each gear reaches the extreme, it must be increased. Do not drive at high speeds in one gear for a long time, otherwise it will cause the water temperature to rise rapidly and the engine will hold tiles. Pulling the speed is a good way to get the car, but it can be counterproductive if it is not operated properly.

In addition, safety should be the first priority when pulling the highway.

In addition, if you want to change the oil, oil filter, air filter, and gasoline filter. Clean the throttle, fuel injector, check the brake pads of the four wheels, change the gearbox oil. The second guarantee is also more important, the car can be saved, and the one that cannot be saved must not be saved, after all, it is also responsible for life.

Not necessarily, there is no need to debate whether there is a need to pull the highway for a long time, and there is no definite answer. There is no clear mention in the car maintenance manuals and instructions for use at home and abroad. The only thing that can be explained is:

The new car can use the high temperature of the engine to burn some carbon deposits in the engine by pulling the high speed after running-in.

The so-called pulling speed is to let you know the limit of what kind of performance your car has, and more importantly, the consistency of the various mechanical joints, such as cutting vegetables and cutting down quickly. It's light on both sides, you know.