Is there any requirement for the packaging of goods in import and export trade?

There are no clear regulations, and it is not that the packaging made by yourself cannot be exported. The point is.

First of all, the wooden box packaging export usually needs to be fumigated, find a special packaging company, the materials they use are fumigated, with the fumigation mark on the top, so as to save the fumigation after the packaging is done.

In addition, large-scale equipment is a little particular about packaging, such as some to indicate the position of the center of gravity, the position of the forklift or the position of the crane hook on the packaging, which can only be accurately marked after scientific calculation, and the professional packaging company has the ability to do this. With these markings, the cargo can be avoided from tipping and tipping during the loading and unloading process, and the loss of the cargo can be prevented.

Some also apply inverted, collision or vibration indication signs, which can be seen through the inversion, collision or vibration of the goods during transportation without having to open the package.

Some should also be sprayed according to the condition of the goods, such as flammable, fragile, moisture-proof, not inverted and other international ISO unified signs, to remind all aspects of transportation to pay attention.

Some also need to be specially marked with the opening position and opening method, so that it is easier to open the package without damaging the goods inside.

And so on, these are not easy for general factories to do, so it is best to ask a professional packaging company to pack the large-scale goods of the highest value.

Import and export goods can be selected according to the different packaging forms of goods (such as: cartons, wooden boxes, woven bags, etc.). Different packaging forms have different packaging requirements.

1. General export packaging standards: packaging is carried out according to the general standards for export.

2. Special export packaging standards: packaging of export goods according to the special requirements of customers.

3. Packaging and shipping marks of goods.

Transport mark): should be carefully checked and verified to make it comply with the provisions of the letter of credit.

According to the Measures for the Administration of Food Safety in Imports and Exports, the upper and outer packaging of imported aquatic products shall have firm, clear and legible Chinese and English or Chinese and the exporting country (region) word marking, indicating the trade name and scientific name, specification, production date, batch number, shelf life and storage conditions of aquatic products, production methods (including marine fishing, freshwater fishing and aquaculture), production area (marine fishing area, freshwater fishing country or region, country or region where the aquaculture product is located), The name, registration number and address of all production and processing enterprises involved (including fishing vessels, processing vessels, transport vessels, and independent cold storage) (specific to the state, province and city) must be marked with the destination of the People's Republic of China. The Chinese label of imported prepackaged aquatic products shall meet the requirements of China's national standards for prepackaged food labeling.

In the international **, the usual practice of the packaging by whom ** is as follows:

Packed by the seller** and delivered to the buyer together with the goods.

Packed by the seller**, but after delivery, the seller will take back the original packaging, and the freight for returning the original packaging to the seller shall be specifically stipulated.

When the buyer adopts this practice, it shall clearly stipulate the time when the buyer provides the packaging or packaging materials, as well as the responsibilities of the buyer and the seller at the time of shipment due to the failure to provide the packaging or packaging materials in a timely manner.

As for the packaging cost, it is generally included in the price of the goods and is not charged, but there are also those that are not included in the price and are stipulated to be paid separately by the buyer. to facilitate the performance of the contract.

The packaging requirements for export products are as follows:

1. Ensure the safety of goods and operators throughout the transportation process.

2. The strength of the outer packaging required during the stacking, unloading and transportation of the goods. The packaging should be as economical, practical and beautiful as possible. In the case that the packaging meets the strength, try to save the packaging material.

3. Cargo loading and unloading, fastening and stacking in the warehouse for easy operation. The hoisting method is simple and reliable, and the design is reasonable. The strength of the packaging design and production is sufficient to meet the requirements.

4. The packaging of the goods should take into account the environmental and climatic conditions of the transportation process and the destination storage, and do a good job of rust-proof, moisture-proof, anti-shattering and other protection.

5. The overall principle of packaging is to ensure that the product will not move before and after, up and down and left and right, which is convenient for lifting and transportation, and there is no shortage of parts when the goods arrive at the site, no damage, no deformation and the marks are clearly visible. Effectively prevent damage to the surface of product materials, paint and galvanizing.

6. Humanized design should be introduced into the packaging process, such as anti-injury protection of sharp protrusions, reasonable stacking, beautiful product packaging, neat, easy to load and unload, and inventory of items, and the maximum utilization of the carrying capacity of the means of transportation including volume.

7. Each package should have at least two sheets, generally the front and side, and the marks, packing lists, and box numbers should be patted into the **, at least one of which is the packaging panorama**.

8. The product packaging must be dry in paint, qualified in inspection, with warehousing procedures (with the warehousing form signed by the inspector), if necessary, the inspection label must be pasted, and protective measures should be taken.

9. The quality of the packaging rack and packaging box of the export product should be as equal to the corresponding product as far as possible. The strength is sufficient, the paint is uniform and beautiful, safe and reliable, the appearance is beautiful, and the color of the packaging rack can not be the same as the color of the product.

10. To meet the requirements of customers to the greatest extent, and to increase the volume ratio of product packaging as much as possible, not only to reduce costs for the company, but also to take into account the transportation costs of customers, timely solicit the owner's packaging and transportation opinions, understand the hoisting and transportation status of the arrival place, and continuously improve the quality of service.

The packaging of export products should pay attention to the following points:

1. It is necessary to adapt to the characteristics of the goods and prevent the occurrence of damage to the goods, deterioration, pollution and other losses.

2. It is necessary to adapt to the requirements of various modes of transportation. For example, sea packaging is required to be firm, anti-extrusion, and anti-collision; Railway transportation requires shockproof packaging, while air transportation requires light packaging, etc.

3. Must comply with the provisions of relevant national laws and regulations and the requirements of customers. For example, the United States** stipulates that all untreated Chinese wooden packaging will not be allowed to enter the country; Arab countries stipulate that the packaging of imported goods prohibits the six-pointed star pattern, etc. In addition, if the customer has certain specific requirements for packaging, they must also be met as needed and possibly.

4. It should be convenient for the relevant personnel in each link to operate. This requires reasonable packaging design, appropriate packaging specifications, weight and volume, scientific packaging methods, and clear packaging labeling to meet the requirements of transportation packaging standardization.

5. Moderate packaging should be used to save packaging costs on the premise of ensuring that the packaging is firm. The cost of transportation is often directly related to the weight and volume of the transportation package. The cost of packaging directly affects the economic benefits of the enterprise, therefore, the packaging materials selected should be light, strong and moderate.

Then it depends on how you choose packaging materials, you are like a control cabinet air compressor.

Summary. 1. There are no special requirements for export cartons, and normal customs declaration is fine.

2.Generally speaking, if it is a general small product, it is recommended that the carton should not be too big or too heavy. It is best to carry it by one person (such as the total weight is controlled within 20kg, and the size does not exceed 40*30*30, etc.).

3. If the product itself is relatively large, some packaging boxes must be large (such as bicycles, furniture products), usually carried by forklifts. The carton will then be set according to the actual size of the product. However, in order to achieve a better packaging effect, it is best to use a forklift as a pallet packaging unit, so that the forklift is not easy to damage the outer packing box when handling.

Foreign trade export declaration in a container for the same goods Some are packaged in cartons and some are used in cloth bags.

1. There are no special requirements for export cartons, and normal customs declaration can be done 2Generally speaking, if it is a general small production blind product, it is recommended that the carton should not be too big or too heavy. It is best to carry it by one person (such as the total weight is controlled within 20kg, and the size does not exceed 40*30*30, etc.).

3. If the product itself is relatively large, some packaging boxes must be large (such as bicycles, furniture products), usually carried by forklifts. Then, the paper god dry box will be set according to the actual size of the product. However, in order to achieve a better packaging effect, it is best to use a forklift as a pallet packaging unit, so that the forklift is not easy to damage the outer packing box when handling.

Not an export carton.

Good. It needs to be separated.

The export transportation packaging should meet the requirements of easy transportation, loading and unloading, handling, firm and reliable, moisture-proof, rust-proof, mildew-proof, waterproof and so on.

Transportation packaging is to reduce the damage to the product as much as possible in the process of transportation and circulation, ensure the safety of the product, facilitate storage, transportation, loading and unloading, and accelerate the handover point inspection. Also known as outer packaging, its main function is to protect the goods, prevent the occurrence of cargo damage and difference in the process of storage and transportation, and to avoid the possible impact of various external conditions on the goods during transportation to the greatest extent, so as to facilitate inspection, counting and distribution.

It is convenient for transportation, loading and unloading, handling, suitable for various forms of transportation, and can protect the goods from loss.