How to connect a landline and a laptop together 50

One router plus two appropriately long network cables. (You can also use wireless routing, and you can access the Internet wirelessly by receiving the signal.) But play the game.

It's best to use a wired one. After the equipment is purchased. Connect the network cable of the original landline to the routing WAN port.

The other two are connected from port 1-4 and are connected to the network card interface between the landline and the book (that is, the RJ45 interface. Then log in to the route from any machine (enter in IE such as: or this can be found on the back of the route or on the route manual), click Quick Setup or Setup Wizard.

When an interface comes out, click Next. Select ADSL (PPPoE) and click Next. Enter the password before the broadband connection.

Click Next, and it's really done. Close the IE. Turn IE back on.

Internet access is available. In the future, any machine can be connected to the Internet as soon as it is turned on.。。 Don't be like before.

Broadband connectivity is also required.

Simply buy a router (wired, wireless or do), use the router dial-up. The general SOHO router is a web configuration, and the password entered in the IE is generally admin, and the password of your Tietong broadband is entered into the box under the WAN port, which is very simple. Do the above configuration,Wired to do two wires or buy two wires plugged in OK,If you use wireless, you have to turn on wireless in the router,Set SSID,Password。

That's it. However, some service providers now limit the number of first-line connections, so it is best to consult with the service provider for a solution.

To tell you the easiest way, you go to the computer city to buy a router and ask him to help you debug it, by the way, the person who helps you debug, he will give you a detailed explanation of the route.

Too demanding, but also call himself brother! Alas! Find some copies downstairs for you.

It's best to buy a router and two network cables (not too long, just enough). The network cable is connected to the router, and the purchased network cable is connected to the router at one end and the laptop and landline at the other end.

Summary. The steps are as follows:

1. After plugging in the wireless network card, the computer is turned on;

2. Use the CD-ROM of the wireless network card to install the driver;

3. After the installation is completed, the network icon in the lower right corner of the screen;

4. Find your own wifi name in the network;

5. Enter the password and connect.

How to connect the computer landline to wifi

The steps are as follows: 1. After plugging in the wireless network card, the computer is turned on; Type search 2, use the wireless network card to install the driver with the disc of the Wei calendar; 3. After the installation is completed, the network icon in the lower right corner of the screen; 4. Find your own wifi name in Netshannaluo; 5. Enter the password and connect.

Hello <>

How to connect the computer landline to wifi

It's not <> your computer

Summary. There are three ways to connect to the Internet on a home desktop computer: wireless Internet access, wired broadband dial-up Internet access, and local connection Internet access.

Specific methods for using wireless networking: 1. First buy a wireless router and connect the home network cable to the wireless router. 2. Check the router's IP address, default username, and password.

There are three ways to connect to the Internet on a home desktop computer: wireless Internet access, wired or car broadband dial-up Internet access, and local connection Internet access. The specific method of using which thing to use wireless networking:

1. First of all, buy a wireless router and connect the home network cable to the wireless router. 2. Check the router's IP address, default username, and password.

Then open your computer browser and enter the IP address of your router in the address bar. 4. Enter the default username and password to log in, and of course you can also modify the username and password, so that it will not be too easy to be cracked.

What is an ISP.

How can this be connected.

Dear, there is a name and password on the router, when you buy a router, the merchant should post it, you look for the router.

Which one. Kiss the name above, and the key below is the password.

Ask about custom messages].

Landline computer to install an inorganic network card, in order to obtain no jujube local line signal, after installation, you can refer to the rock pin to detect the wireless signal, find your wireless only travel name, connect it.

Desktops generally do not have a wireless network card, if you want to use wifi, you need to install a built-in or code-burning external wireless network card, you can also install it to the wifi receiver, after the correct installation of the driver, and then judge the cheats to enter the network connection, set up the wireless network card in the adapter, and you can delay the void.

How to connect to wifi blindly

It can be equipped with a wireless network card.

1. Connect the ** wire to the ADSL separator;

Connect the wire of the phone port in the ADSL splitter to the jack of the machine;

Connect the ** wire of the modem port in the ADSL splitter to the LINE jack of the ADSL modem.

2. Insert one end of the network cable into the ethernet jack of the ADSL modem;

Plug the power cord on one end of the ADSL modem into the power jack and the other end into the power supply.

3. Connect the LAN port and computer network port of the router at both ends of the network cable.

2. Click Next;

3. Select PPPoE (ADSL Virtual Dialing) in the Internet mode, and click Next;

4. Enter the broadband account provided by the broadband operator in the Internet account and the broadband password in the Internet password;

5. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption method, and set the wireless password of no less than 8 digits in the PSK password;

How to connect your router to your computer.

1. Router.

2. Connection method.

Description: A: The router has 4 yellow L ports, which can pull out 4 network cables for 4 computers to access the Internet at the same time.

B: The blue W port is the network cable plugged into the operator's home.

3. Take TPLINK router as an example to set up the method.

A: Open the browser and enter the address on the back of the router in the browser.

b: Enter the username and password on the back of the router in the dialog box that comes out.

C: On the router management page, click the settings guide.

E: Select ADSL Virtual Dialing.

4. After the connection and setting are completed, you can access the Internet.

This problem is a bit general, one end of the network cable is plugged into the computer network card interface, and the other end is plugged into the router LAN port, even if it is connected, as for whether you can access the Internet, it depends on whether you have connected the router to the cat, the cat also has to be plugged in** line, and the router needs to be set up for the first time.

One end of the network cable is connected to the host computer with a network card port, and the other end is connected to the LAN port of the router. The network cable from outside is connected to the WAN port of the router.

Is it so troublesome? I can use a network cable to plug in the laptop at this end and the desktop at the other end, and my friend and I connected it like this. Can Warcraft, CS.

Buy a cheap crossover cable and set the IP address to the same network segment.

If you use a cat at home, you must have a router to switch to the switch. If you want to set it up, there is a specific introduction in the manual of the router.

Buy a wireless router for laptops, wireless Internet access, and wired for landlines.

What does a landline mean? Machine?

If your notebook has its own modem, you don't need any equipment, and you can use a broadband dial-up connection to the Internet directly with a ** cable to connect to the RJ11 interface of the notebook. If you don't have one, you need to purchase a modem.

The premise is that you have an ADSL online account.