How to solve the 797 error of laptop dial up connection?

The point is that your router may not be a router but a hub.

The router can dial up to the computer on the router and does not need to dial up as long as you change the IP and gateway address to share the Internet.

The hub cannot be dialed, but it can form a local area network through one of the dial-sharing units.

Two solutions:

Yes the router is set up in the router dial-up and gateway.

Everyone sets up the IP and the gateway and can access the Internet without dialing up.

It's the hub When that person is not there, you set the IP in your local connection to the mask: the gateway drains the DNS

Then open IE - Tools - Internet Options - Connect - Add - Connect to the network via broadband - Write the dial-up account number and password Save so that others can access the Internet through your dial-up.

It may be that the network device has no bridge to search, or it is turned off or disabled, and the dial-up 797 error is caused.

The steps to resolve the problem are as follows:

1. Right-click "Computer" - "Management", click "Device Manager", and prepare to view the operation of computer equipment.

2. Click the triangle next to "Network Adapter" to display the relevant network configurator on all computers, which is used to see which network configuration has a problem with the source or is not activated.

3. Check the network devices inside, if the network card device is disabled or not enabled, click "Enable Device", and the enabled device will enter the working state.

<>5. Check the network connection status, and after turning on the device, the network connection is normal. Connection error 797 problem solved, try to open the web page and the connection is normal.

Summary. How to solve laptop broadband dial-up connection error 797? Urgently enter the management interface, and click on the left side to open [Device Manager].

Find the Network Adapter option in the Device Manager list and click Open.

Check whether the current NIC is disabled in the network list, and if so, right-click to start it.

All enabled. If there is any problem with your network card driver, use the driver wizard to detect it.

What is a driver wizard.

Don't you have 360, you can also detect it.

It didn't work after fixing it, I rebooted. Good.

The most common way to access the Internet in win7 system is to dial up to connect to broadband, sometimes connecting broadband will encounter some error prompts, such as win7 system error 797 when dialing up to connect to broadband Internet access, what's going on? Broadband connection error 797 is usually caused by a faulty network card, either because the network card is disabled or because the network card is loose. How can we solve this problem?

Let's take a look at the specific solutions below.

Recommended:

Solution: 1. Right-click the [Computer] icon on the computer desktop, and click to open [Administration] in the pop-up menu bar;

2. Enter the management interface and click on the left side to open [Device Manager].

3. Find the [Network Adapter] option in the Device Manager list and click to open it;

4. Check whether the current network card is disabled in the network list, and right-click to start it if it is disabled;

5. If the driver is not disabled, there may be a problem with the driver, so we will look for the driver Jingfeng Zen Spirit;

7. After the detection is completed, find the network card driver and reinstall it.

The above is the win7 system dial-up connection broadband Internet error 797 causes and solutions,We only need to check whether the network card is disabled,If it is disabled, please turn it on,If it is turned on broadband or not,Then go to the **Driver Genie to detect and repair。

It may be a 797 error caused by the network device not being turned on or disabled.

The steps to resolve the problem are as follows:

1. Right-click "Computer" - "Management", click "Device Manager", and prepare to view the operation of computer equipment.

2. Click the triangle next to "Network Adapters" to display the relevant network configurator on all computers, which is used to see which network configuration has problems or does not start.

3. Check the network devices inside, if the network card device is disabled or not enabled, click "Enable Device", and the enabled device will enter the working state.

<>5. Check the network connection status, and after turning on the device, the network connection is normal. Connection error 797 problem solved, try to open the web page and the connection is normal.

This can be solved by:

1. First open the laptop and enter the computer desktop, right-click the computer icon on the desktop, and click Manage in the pop-up menu bar.

2. After entering the management interface, find Device Manager in the left navigation bar and click to enter.

3. After clicking Device Manager, find the Network Adapter option in the device management list on the right and click Open.

4. Right-click the current NIC in the network adapter list to check whether the NIC is disabled, if it is disabled, use the right mouse button to enable it to start.

7. After the detection is completed, click one-click installation, and the broadband dial-up connection error can be solved after the driver is successfully installed.

Phenomenon Analysis:

Error 797: A connection to the remote access server was not established because the modem could not be found.

Solution: 1. First of all, broadband connection error 797 is mostly caused by hardware failure, especially the failure of the cat.

2. Then you should check the properties of the network and whether the relevant network protocol is correct. If not, the correct network protocol should be installed.

3. Then check the NIC driver, whether there is an exclamation point and the situation that it cannot operate normally.

Put the dynamic IP settings consistent with the cat's, and try again, but it doesn't work, but there is a problem with the connected network cable.

A host server needs to be set up.

For example, if you connect to the e-modem with a desktop, the desktop is dial-up for the host, and the network connection is connected to the modem, and the cat imports the ADLS signal. You can set this IP as follows: Gateway: that is, the address of the E cat, you should have it under the cat).

Then set up your notebook,The notebook does not need to be connected to the network,Set up the gateway:that is, the desktop IP),Then enter the neighbor attribute on this subnet,Broadband connection attributes——Advanced tab——Tick ok in the first tick box to log out or restart the notebook to try。

There is also a 797 error when no network connected devices are found such as cats, network cards, switches. The reason for the error is because the sub-connection port is wrong!

I had the same problem as you, how did you solve it?

The same question: How did the landlord solve it later?

Error 797 is displayed for broadband Internet access, which is caused by the fact that the modem power is not turned on or the corresponding protocol is not properly bound after the software is installed, and an incorrect empty connection is established when creating a dial-up connection.

Solution: Turn on the power of the modem, delete the existing broadband connection and re-establish the broadband connection when the modem is powered on normally.

China Telecom is here to help.

error 718

Problem: Remote computer timeout does not respond when verifying username, disconnect reason: ADSL ISP server failure.

Resolved: Call your ISP to ask.

That's your broadband provider, not your own.