HOW DO I REINSTALL A DESKTOP WINDOWS XP SYSTEM There are a few steps, and who can tell me them all

1. Prepare the Windows XP installation CD.

2. Set the first boot drive as the optical drive in the BIOS, save and exit.

3. Start the computer with an XP disc.

4. Delete each partition (if there is no important data in the hard drive).

5. Create partitions according to your own needs.

6. Install Windows XP on the C: drive (you can install Windows XP on the partition of your choice).

7. Format C: disk (formatted with NTFS).

8. Follow the prompts.

9. Agree to Microsoft's agreement.

10. Enter the Windows XP serial number.

11. Enter the correct time, nationality, etc.

12. Wait for the Windows automatic installation to complete.

13. Format in Windows XP, except for C: disk.

After installation: 1. Install a hardware driver (motherboard, graphics card, sound card, printer, etc.) 2. Install the decompression software (Winrar).

3. Install anti-virus software and upgrade online.

4. Install Microsoft patches.

5. Install office and other application software.

Here's how.

Now format the original system in the machine (which disk is installed on which disk).

In the DOS environment, it is recommended to use a 98 boot disk.

I start it in setting the machine to the optical drive first.

Select the path to install in the mounting disk.

You'll need a good optical drive. An operating system CD, as well as drivers for your hardware, sound card drivers, network card drivers, graphics card drivers, etc.

2.When you are ready, restart the computer, press the del key before the computer enters the DOS, enter the CMOS settings, select the BIOS option, can you recognize the point in English, select the first boot setting, and set the first boot to the optical drive. Then press the Esc key to return to the main menu.

Select the option to save and exit, press enter, and press the letter y

3.Restart the computer, insert the XP CD, and enter the XP installation interface. Follow the prompts to delete all partitions of the hard drive (so that all the files will be gone, if the computer has viruses it is recommended that you do so, so that all the viruses will be gone.) )

4.Create a partition, prompted, the size of the partition can be set freely according to the size of your hard drive.

5.Once all the partitions are complete, select the region where you want to install the system. Click Enter.

6.After a long wait, your computer will be installed automatically after about 45 minutes.

7.After installation, enter the system operation, right-click on My Computer, select Properties, select Hardware Options, and then click Device Manager.

8.Hardware with a question mark in the Device Manager needs a driver, so put in the CD you have prepared and matched your computer (these drivers are included with the sellers). )

9.Double-click on the hardware with the question mark and select Reinstall Driver, a dialog box will pop up, and select Yes or Agree along the way.

10.After installing all the hardware drivers with question marks, click on My Computer, if you partition it into three zones such as: cd e

If the operating system is installed in c, your d e is not formatted, double-click d will bring up a dialog box for you to format, select format, there are two formats you can choose. And so on. Format all your unformatted hard drives.

11.The computer system is installed.

Buy a pirated version, of course, you have the money to come to the genuine version, preferably the tomato garden's no-monitor automatic installation version, the version is better for me to use.

Turn on,As soon as you see the screen with words,Press the delete of the disk to build (there are also motherboards that press "F2" and so on into the BIOS,If pressing delete is invalid,Restart and press F2 to see)。 Inside is the motherboard BIOS settings, find your motherboard manual, find "First Boot" to see if it has been set to CD ROM, if not, set it to this, and then open the optical drive, put the disk, press the keyboard F10, and confirm the exit.

See the Install System menu, select Install XP Automatically, and you will be taken to the Hard Drive menu. Select the C disk, click "D" to delete the area, and then click "L" to confirm, after deleting, click "C" to build the area, OK, after building the area, then press it to OK, format the option, select NTFS (fast), and then the next thing is fully automatic.

To put it simply:

1.What you need to prepare in advance: XP installation disk or backup it to a non-system disk on the hard disk2Format the system disk.

3.Boot with an optical drive, and then install.

4.Install other software, such as drivers for each board, anti-virus software, office software, games, etc.

Go buy a system disk.

It's all installed automatically now.

If you use it, you will understand.

None of the upstairs is quite right.

1. Reboot the computer, press and hold the delete button to enter the BIOS (that is, boot in and out system).

2. Refer to your motherboard's manual to set the CD-Room as the first boot item (usually the second item of the BIOS).

3. Restart the computer and put it into the operating system disk.

4. Follow the prompts to format the C disk and install the machine.

5. Sit down and have a cup of tea (because it takes 50-70 minutes to install the machine) 6. After installation, network settings, office and other common software can be installed.

Now it's all installed automatically, and it's very simple.

It's much more convenient if your system is backed up.,As long as the ghost can restore the system.,If you don't have a backup, you'll have to redo the system with a light butterfly.,If you don't even know ghost, it's more troublesome.,But you can learn more about it.。

As long as you have a heart, you will learn it.

Wow, that's good.

I also learn to learn, thank you.

References MSDN I tell you.

Second, if there is a problem with permissions, it is best to make a USB flash drive PE system, which is a necessary tool for maintaining and installing the system.

Click to install the desired operating system.

Select the boot drive (keep the boot green).

Select the partition of the hard disk where the system is installed.

Click Start Installation.

Restart the computer and automatically complete the installation of the operating system until the desktop displays the installation of the operating system.

References How to use it.

References "Installing the System.

I'll do the system for you! It's easy! Fang** brand desktop computer boot without pressing F12, select the disc to start and you can enter the installation system option!

After booting up, follow the prompts to select the priority boot order, set the first bit to CDROM, and then save and exit. After rebooting at this point, the optical drive starts to read the disk. Then press the prompt, generally 1, and it is installed.

Buy a disc and install it.,Generally, it starts automatically after restarting.,Or you have to change the startup item!

Put the disc into the CD-ROM drive, press the del key after restarting, enter the BIOS settings, set the boot preference to boot from the CD-ROM drive (*** CD), press F10 to save, and exit the BIOS settings, the system will enter the installation mode after rebooting again, because you are a ghost disk, you can choose the first one for general installation, and install it to the C disk with one click, which is very convenient (some disks can be directly pressed the number key 1 or A for the first time to select, and then the system will automatically install, There is no need for users to operate, and the ghost disk is very intelligent and convenient for rookie personnel to operate.

The first step is to back up the useful things in C: (e.g. my documents) and the second step is to know what brand and model your graphics card and sound card are (not all drivers are available in XP).

Step 3: Put the XP disc into the optical drive. Step 4, reboot into CMOS, select CD-ROM to boot, Step 5, enter the installation program, carefully watch each step, format C: disk, (if there is no special work needs, it is recommended to use FAT32 format).

Next, follow the prompts and follow the steps all the way.

1.Go to CMOS and set the first disk of the system boot to CD-ROM 2Save, restart.

Put the system disk in the optical drive, press the installation process, ask if you want to install the new system on the original system disk, ask if you want to set the file system to FAT32, or NTFS, generally make FAT32. Also know the product key, etc.

2.I suggest that you go and buy an automatic loader, you just put the disc in it, and wait for okay, this process usually takes more than 40 minutes.

3.I also recommend that you buy a dog disk (ghost disk), after the disc is put in, just click to reinstall my system, and it's OK. It only takes 2-8 minutes.

3.Then, you install your sound and graphics drivers. Just like before.

4.Before reinstalling the system, you can save your important data (as long as it is not on the C drive).

It's very simple, to reinstall the XP system, you just need to hold the system disk and follow the above prompts step by step.

Now there is a system disc called Tomato Garden, which is available in 98xp, which is automatically installed and can be bought and tried.

All you have to do is take the system disk and follow the instructions above step by step! 11