How to recharge the smart meter owner?

Charger connection The two hind feet of the little turtle charger are first symmetrically snapped into one side of the crown button, and then the front foot is snapped into the other side, pressing it appropriately so that the thimble of the charger and the kido children's smart watch are under it.

When the meter account is cancelled, it is necessary to replace the meter with a new one.

There is a preset electricity fee of 50 yuan in the new meter, and the electricity fee in the old meter will be settled when the user goes to the business hall to change the new card. For example, when changing the meter, if the remaining amount of the old meter is 30 yuan, you need to pay 20 yuan when applying for a new card. If the balance of the old meter is 60 yuan, the electricity bill of 10 yuan will be written when applying for a new card, and the user will insert the new card into the new meter, and the electricity bill will be entered into the meter.

If the balance of the old table is 5 yuan on credit, 55 yuan will be required when applying for a new card.

The smart meter has been closed, and if you want to regain electricity, you must go to the power company to re-apply for an account, and you can recharge it after success.

If you want to recharge this account, you need to use your corresponding data to be ID card or the like, and then you need to go to the counter to re-apply for this card.

If the smart meter is closed, you have to pay it back, you should find the power supply company of the store, and ask him to help you and see how it goes

If you are a customer within the service scope of Guangdong Power Grid Company, the information required for the application and installation business is as follows:

1. Identification information of the electricity user;

2. Proof of ownership of the property at the electricity address;

3. Payment information;

4. If you entrust others to act on your behalf, you need to provide the identity certificate and power of attorney of the agent.

The required materials need to provide the original, as well as 1 copy verified by the customer to be consistent with the original and signed, and the customers of enterprises and institutions should sign and affix the official seal in the copy. When handling business, resident customers need to sign and confirm on the "electricity business bill", and enterprise and institution customers must affix the official seal on the "electricity business bill".

There are differences in the information in different cities, and the specific information is subject to the information of the staff.

Handling method: WeChat pay attention to the "China Southern Power Grid 95598" public platform My electricity business handling Electricity application Select the type of new business that needs to be handled and fill in the basic information according to the prompts to submit.

After completing the application for installation, the power supply department will arrange staff to make an appointment with you for door-to-door service, and after completing the on-site investigation and collecting information, you can install the meter and send electricity.

We hope you find ours helpful.

Let's take a Huawei phone as an example to introduce the specific operation method:

1. First, open the utility in your Huawei phone, and then touch to turn on the smart remote control function.

2. After turning on the smart remote control, click Add remote control.

3. After opening the page, click on the home appliances you want to control, such as TVs, air conditioners, set-top boxes, etc., and the following is an example of controlling TV.

4. Click on the TV, and then select the brand of the TV.

5. Finally, point the phone at the TV and click the power button.

Very interested, this should be in the river.

Su Wuxi Internet of Things has been realized, I don't know how to get it. Personal reason.

Solution: Install the corresponding program on the mobile phone, send instructions through the data network after opening the program, and send instructions according to the corresponding electrical appliances after receiving the receiver in the home, for example, the air conditioner can be executed by setting 26 degrees. It doesn't feel practical to turn on a desk lamp.

The rice cooker needs to be filled with water and rice before going out to cook rice (you must have experience in preliminary tests, if you add too much water after the rice is soaked, it will be too sticky, and it may not taste right with your family). Compared to the current situation, if these chips and program items are added, the cost will increase. The cost of a wireless cat receiver is 150+, and the batch number may be reduced.

After receiving the command, the wireless cat transmits it to the wireless router, and each item turns on the wifi receiving function to receive its own command. The corresponding problem is again, household power consumption will increase, which is contrary to green environmental protection. Only think so much, hehe.

The specific solution is very simple, just install a control chip that can connect to the Internet in the home appliance you want to control, just like adding a network module to a fully automatic circuit control module. It doesn't cost much to get a module, but it's very backward in China, and everyone can't accept it, security is a problem, and online banking is not safe, let alone home appliance control.

It's good to say, you don't need a fast network, and Bluetooth is installed on every electrical appliance. Remote control of the network.

Nowadays, most home appliances are controlled by single-chip microcomputers. This is more cost-effective. The key here is on the microcontroller to receive Bluetooth signals. I checked that the single-chip microcomputer can receive Bluetooth signals. But what I don't know is the resolution of the Bluetooth signal on the microcontroller.

I'm also a half-bucket of water. Interested in talking.

The embedded program is more reliable, and the corresponding smart appliances are required.

If it is a mobile phone and home appliance sales, it can be called a certain home appliance city.

What is the name of the appliance together? Just name it as you can imagine.

You can strengthen the monopoly of small household appliances on the original store name, which is Giti Home Appliances and Mobile Phone Hypermarket.

Mobile phones with infrared probes are OK, I have used them on TV, but now the new mobile phones do not have probes, and if you want to remote control, you must buy an infrared probe and install it.

Open your phone's smart remote control app, this feature is only available on phones that support infrared emitters. Select the type of device you want to remote. Choose the brand of air conditioner, and note that only those that appear in the list can be remotely controlled.

There are two ways to control household appliances through the wifi module, one is the way of local area network, and the other is the way of wide area network. Of course, in the case of these control methods, users do not need to know this information when they use their mobile phones to control home appliances.

Mobile phones and household appliances are not cheap, it is because of Xiaomi, whether it is mobile phones or home appliances, they have been affected by Xiaomi's high cost performance to the entire market, and Xiaomi has only taken nine years from obscurity to the top 100 enterprises.

The latest folding phone 15k, is it cheap?

Remote control refers to the management personnel in a different place through the computer network remote dial-up or both parties access to the Internet, etc., to connect to the computer to be controlled, and display the desktop environment of the controlled computer to their own computer.

It shouldn't be very realistic.

Not all products are suitable for this line, and the addition of intelligent and long-range operation functions will not only not make earth-shaking changes to the existing products, but these functions will also increase the cost, and the gains outweigh the losses.

In our view, the so-called intelligence really does not mean that it is controlled with a mobile phone, and mobile phone control is not the only label of smart home appliances, and the real "non-inductive" intelligent application is the goal we yearn for in the future. Of course, this may be a little premature for now, but I hope that when various home appliance manufacturers launch new products, instead of racking their brains to let the product be dragged onto the mobile phone, it is better to consider the actual user experience, starting from the application attributes of different products, perhaps there may be more consumers who pay for you.

Appliances that need to have the Internet of Things, such as Xiaomi Home, will have instructions for specific operations.