Is there any way to control the moldy hair in the old house at home?

Nowadays, young people are basically working in the city, but the old house of the family is empty, and we will go back to our hometown when we go home for the New Year, but what to do if the house is moldy, desiccant, activated carbon, moisture-proof, and moisture-absorbing。Use a small bag of lime and tie it into a small bag and place it in all corners of the room. Buy an air dehumidifier, it's like a vacuum cleaner that concentrates moist air together.

In normal times, windows should be opened for ventilation to reduce the steam content in the room.

When mold is on the wall, you can brush the mold stain with a dry toothbrush and then gently wipe it with a soft cloth to prevent mold growth. Alternatively, adjust the mixture of water with bleach and water in a ratio of 1:99 and pour it into a spray bottle, spray on moldy walls.

Sand the wall with sandpaper, then apply a layer of waterproof primer, and finally apply latex paint.

Add water with bleach at a ratio of 1:99 and water mixture, pour it into a spray bottle, and spray it on the moldy wall, which can solve the problem of moldy wall. If the weather is still wet, bleach and water can be pressed 1:

20 scale is used on the mold on the wall until the wall is dry, and then sandpaper the wall is smoothed, then apply a layer of waterproof primer, and finally apply a layer of latex paint.

Clean the moldy parts of the wall (the larger the cleaning area, the better the repair effect); When brushing dense paint (alkyd paint), it should be thicker and brush latex paint, and a new batch of ash. Because mold on the wall is caused by moisture, pay attention to ventilation during use. Although the old house is not good-looking in appearance, the old house belongs to the warm winter and cool summer, and it is very good to maintain it well, and there is a feeling of a villa.

It may be that the air in your old house is too humid, so it will become moldy, so open more windows for ventilation and bask in the sun to control it.

The mold of an old house must be caused by too humid air. Everyone must remember to clean the bathroom every time you check in to avoid getting sick or allergic.

The moldy hair in the house is because the moisture is too heavy, you can open more windows to ventilate, or you can use special dehumidification appliances to reduce the moisture in the air.

You can open the windows to let the sun in, bask in the sun or open the windows and doors regularly to let the air in and let in the wind, so that it will not be so easy to mold.

Use some desiccant. For large areas, you can put some lime powder in the house to keep the house dry, so that it will not grow moldy and hairy.

Since it is an old house, it must be older and more damp, so we should open the doors and windows for ventilation, and clean the house regularly.

You can always open the windows for ventilation, and only by keeping the air in the house dry can you control the mold.

The first way is to use a dry toothbrush, plus some medical disinfectant alcohol, through a hard brush, to forcibly clean the fluff on the wall.

Because of the long history of old houses and the limited building materials, mold on the walls is a common problem. Mold can not only affect the aesthetics of a home, but it can also damage the structure of a home, cause water leaks, and even affect the health of the occupants. Therefore, the problem of mold on the walls of old houses needs to be dealt with in a timely manner.

Here are some suggestions to solve the problem of mold on the walls of old houses:

1.Clean the walls: First, thoroughly clean the walls of mold.

A percentage of bleach or vinegar can be used to clean, then cleaned with a deep detergent and rinsed thoroughly with clean water. During the cleaning process, avoid allowing mold to scatter and spread. In addition, you can use a fan or a ventilation device to speed up drying.

2.Look for leaks: The main cause of mold on the wall is excessive moisture, so look for the source of the leakage that causes moisture. Inspect walls for cracks or leaks, or damp floors or basements. Once the source of the leak is located, repair it.

3.Maintain ventilation: Keeping your room ventilated is an important measure to prevent mold growth. Exhaust fans can be installed or large windows can be opened to exhaust the humid air. Also, open windows for ventilation when the weather is suitable.

4.Use antifungal agents: The use of specialized antifungal agents can effectively prevent mold growth. Common antifungal agents are formaldehyde, calcium carbonate, etc. However, be sure to read the directions for use and recommended dosage before use.

5.Improve room humidity: To improve the humidity in your room, you can choose to install a dehumidifier or use a humidifier to adjust the humidity of the air. In addition, keep the room clean and tidy to avoid excessive humidity and the breeding of inhabited organisms.

In short, it is important to find and take measures in time for the problem of mold on the walls of old houses. By thoroughly cleaning the walls, looking for the source of leaks, maintaining ventilation, and using antifungal agents, you can effectively prevent the growth of mold and keep the room fresh and healthy.

You can use meiboss mold remover to remove the mold first, after all, mold will harm the health of the human body, so it should be removed in time, after removal, you can spray a layer of anti-mold agent to do a good job of anti-mold measures to prevent mold from breeding again.