How to install a wireless router mercury

The steps to install the wireless router Mercury are as follows:

First, connect the WAN port of the wireless router to the modem, connect the computer to the LAN port of the router, and turn on the power supply (see the figure below).

Open the computer browser, enter and enter in the browser address bar, the router login window appears, enter the router's management username and password and confirm (generally admin, you can see the label behind the router for details);

At this time, open the router management interface, and click the setup wizard on the left side of the management interface.

Click Next to display the Internet access mode selection window, select the automatic Internet access mode or ADSL virtual dialing mode, and then Next;

Enter the broadband and password, and click Next;

Enter the wireless network settings interface to set the wireless network password (select WPA-PSK WPA2-PSK here);

Once the settings are complete, you can restart them.

How to set up your computer and connect to your router's network:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Set the method of automatic acquisition of computer IP and DNS]:

Win7 system setting method:

Right-click [Network] Properties [Change Adapter Settings] [Local Connection] [Right-click Local Connection Properties] [Double-click TPC IP Protocol] [Then click "Automatically Get IP Address"], and then click "Automatically Get DNS" Server Address] [Click OK].

The steps to set up a wireless network are as follows:

2: After entering the router, set up the wizard next step and select PPPoE (ADSL Virtual Dialer) to enter your Internet access.

Password Next, SSID there to set your wifi name, PSK there to set your wifi password, next save heavy.

Just turn on the router.

Here's how to use it:

Extended Information: Mercury Wireless Router Setup Step 1: First turn on the wireless router, and if it's a laptop, make sure the computer is connected to the router.

Step 2: Open any browser input.

Step 3: After press enter to confirm, the login interface will appear, enter the username and password in the login dialog box (the default factory settings are "admin"), and click the "OK" button.

Step 4: Once you have successfully logged in, click on the setup wizard on the left.

Step 6 <>: Unless it is optical fiber fixed IP access, this is generally a unit or cell network, and other access methods are selected as the second one, PPPoE.

<> wireless status: Turn the wireless function of the router on or off.

SSID: Set any string to identify the wireless network, this can be named by yourself.

Turn off wireless security: Turn off wireless security, which means that the router's wireless network is not encrypted, so that everyone else can join the wireless network.

WPA-PSK WPA2-PSK: The encryption method of the router's wireless network, if selected, enter the password in the PSK password, which is required to be 8-63 ASCII characters or 8-64 hexadecimal characters.

Do not modify wireless security settings: Select this option to maintain the last set parameter in the wireless security options. If you have never changed your wireless security settings, selecting this option will turn off wireless security at factory defaults.

With the increasing demand for digital homes, remote control, fast wiring, and more, the importance of wireless routers is becoming increasingly prominent. However, traditional wireless routers still connect to the Internet through wired connections, which limits the mobility of wireless routers and fails to achieve true wireless connections. Here's the installation manual I have compiled for you about the mercury wireless router, let's take a look!

Mercury Wireless Router Installation Instructions01After installing the router, right-click "Network Neighbors" on the desktop and click "Properties".

02Right-click on "Local Connection" and select "Properties".

03Double-click on "Internet Protocol" or select it and click "Properties".

04Set both the IP address and the DNS server address to be obtained automatically.

05Click OK to check whether the local connection is in the "Connected" state.

06 Open the browser, enter**", enter admin in the login prompt box, and the password is also this.

07After logging in successfully, you will enter the settings interface of the router and click "Setup Wizard".

08Select "PPPoe".

09 Enter your broadband connection account and password on this page.

10. After entering the password of the broadband connection correctly, you can start setting your wifi password.

11. After setting the password, click "Done" to turn on the wifi successfully.