Why can t I use bubbles? What should I do if the bubble machine doesn t produce bubbles?

Your level is not enough, BB is greater than the master's level 10 can not be used, greater than level 5 BB has no experience.

Your level is too low, the bubble level is too high, BB is greater than the master's level 10 and cannot be used, and BB is greater than level 5 and has no experience.

There is no limit, this is level 0 can bring bubbles, and the level of the character is not equal to 10 levels smaller than the baby, so.

Which district are you, make a friend, right?

The bubble level is too high.

You're too low.

The difference must be less than or equal to 10 levels to be brought.

Experience that is greater than level 5 BB will not be.

If you are 10 levels higher than your level, you will not be able to participate in the battle!! You're too low-level!! Why are you buying bubbles that high?! I forgot to ask, which district are you?

There is no restriction on the level of carrying.

But the baby level is 5 levels higher than the character level, so there is no experience.

If you are 10 levels higher, you will not play.

If you are higher than a certain level, you can't use it.

Halo If the summoned beast exceeds you by level 10, it will not be able to participate in the battle, and if it exceeds you by level 5, it will not be able to gain experience I said, you better not change to B at level 25 My number 57 still brought a bug.

But summoned beasts have a limit on the level of participation in the battle.

Summoned beasts that are 10 or higher than the player's level cannot participate in the battle.

That's what I wondered at first

Hey hey :)

There must be other restrictions Ask the masters.

Maybe the battery is dead, just replace it with a new one.

Check whether there is still bubble water in the bubble machine can, if the bubble water is gone, it will not bubble, mix the bubble liquid with water according to the instructions and add it to the can.

If it's an electric bubble machine, check if it's out of battery and try it with a new battery. If the battery is out or the battery is too low, you can't spit out bubbles.

Check to see if there is an air leak problem in the machine, if there is air leakage in the bubble machine, it will not be able to spit out bubbles. Or see if the mouth that spits bubbles is broken, if it is broken, you can consider buying a new one or taking it to repair according to your own needs.

Precautions for the use of automatic bubble machine:

1. You need to press and hold the switch for the first time, and it takes a certain amount of time for the bubble machine to bubble.

2. Before playing, install the battery first, and then fill the bubble liquid.

3. The installation of the battery must be correctly placed according to the positive and negative poles.

4. When playing, the bubble machine should be as upright as possible, and the tilt angle should not exceed 30 degrees to avoid the leakage of bubble liquid.

5. After playing, remove the bubble liquid device and the battery to avoid the liquid flowing out and damaging the electronic components.

6. If you use the bubble hammer for a period of time and it is not smooth, it may be that the battery power is insufficient.

Reasons and solutions for bubble machines not to bubble out:

1. The liquid of the bubble machine is not enough or the bubble water is too thin.

Enough bubble water should be added to the bubble machine, and it should be prepared according to the correct proportion, add a cup of water to one-third of the cup of dish soap and add half a spoon of sugar and stir well, so that the bubbles will not be thin, and the proportion is just right.

2. The pipeline of the bubble machine is blocked.

When the bubble machine pipe is blocked, you can use a thin iron wire to reach into the bubble machine pipe to dredge it a few times.

3. The battery of the bubble machine is not installed correctly.

The bubble machine needs to install 3 ordinary batteries, but it does not support high-energy batteries such as Nanfu and Shuanglu, and it depends on whether the positive and negative poles of the battery are installed correctly.

In addition, during the use of the bubble machine, it must not be tilted or inverted, because the bubble gun spout has a residual water ** device, if the tilt is too large or inverted, the bubble water will flow out.

The principle of blowing bubbles:

Bubble water is generally referred to as a blister formed by mixing various solutions to increase the surface tension of water.

Due to the increase of water tension, the mutual traction force that exists inside it and is perpendicular to the contact surface of two adjacent parts when subjected to tensile force.

These water molecules seem to be glued together, and the attraction between water molecules on the surface of the water is greater than that between water molecules and air.

It is because other solutions, such as soap, "break" the surface tension of the water, that colorful bubbles are formed.

Generally speaking, reducing the surface tension to only 1 3 under normal conditions is the optimal tension required to blow bubbles.

If the battery has not been replaced for a long time, first consider the reason why the battery is dead, and replace the battery in time to solve the problem.

2.The mouth of the pipe out of the bubble is blocked.

The bubbles of the bubble camera come out through the tube of the camera, and if the bubbles do not appear, the pipe may be blocked or the pipe is not in the right position, so you need to use a wire or other tool to pass through the tube or adjust the position of the tube to ensure that the bubble water can be sucked normally.

3.Circuit board short circuit.

Many people play with bubble cameras with too large tilt angles, which will cause bubble water to flow into the machine, and the circuit board is easy to short circuit when exposed to water, so you need to wait for the bubble machine to completely dry before playing.

4.Bubble water does not meet the requirements.

The bubble water specially made by the bubble camera can make the bubbles both large and not easy to break, if it is inferior bubble water, it may not be able to generate bubbles normally, if the above cannot be solved, you can consider replacing the bubble water.

5.Bubble camera malfunction.

At this point, it is necessary to repair it or buy a new one.

Hope it can help you, thank you.

The solution for the bubble machine not to bubble out:

1. If the liquid of the bubble machine is not enough or the bubble water is too thin, enough bubble water should be added to the bubble machine, and it should be prepared according to the correct proportion, add a cup of water to one-third of the cup of dish soap and add half a spoon of sugar and stir evenly, so that the bubbles will not be thin, and the proportion is just right.

2. If the bubble machine pipe is blocked, you can use a thin iron wire to reach into the bubble machine pipe to dredge it a few times.

3. If the battery of the bubble machine is not installed correctly, the dolphin bubble machine needs to install 3 ordinary batteries, but it does not support high-energy batteries such as Nanfu and Shuanglu, and it depends on whether the positive and negative poles of the battery are installed correctly.

In addition, during the use of the bubble gun, it must not be tilted or inverted, because the bubble gun nozzle has a residual water ** device, if the tilt is too large or inverted, the bubble water will flow out.

How to use the bubble machine toy:

1. The bubble machine needs to have a battery, so open the battery cover first and put the battery on.

2. The first time you use the bubble machine, you need to press and hold the switch to let the bubble water be pumped out and spit out the bubbles.

3. If the bubble machine has semi-automatic and fully automatic, you can switch, there will be a fully automatic near the semi-automatic button, and you will automatically spit out bubbles after clicking it, no need to press it all the time.

4. When using the bubble machine, try to play horizontally, not too tilted, otherwise it will affect the bubbles.

5. After playing, remove the bottle and wash it, wipe the bubble machine clean, and remove the battery if you can.

6. If the bubble machine is used for a long time and there is a shortage of power, or you can't spit out bubbles, you can replace the battery and try it.

Check to see if the intake and outlet are reversed, if they are reversed, there are no bubbles.

If the bubbles are blocked by dirt, clean them with hot water or a liquid that has a cleaning effect, and give it a try!

If the bubble machine doesn't come out, it may be that there is a problem, it may be that there is no air in it, so the place where he does not bubble can help you.

If the battery is a little bit If it is an electric bubble machine, check whether it is out of power, try to replace it with a new battery, and if it is out of power or the power is too low, it will not spit out bubbles.

Whether there is a lack of bubble water, first check whether there is bubble water in the bubble machine can, if the bubble water is gone, it will definitely not bubble, and add the bubble liquid to the canned after mixing it with water according to the instructions.

Check the machine to see if there is any air leakage in the machine, if there is air leakage in the base bubble machine, it will not be able to spit out bubbles. Or see if the mouth that spits bubbles is broken, this one is broken and difficult to repair, and the cheap one can be thrown away by Qingkai directly.

1. The bubble machine does not produce bubbles, maybe the battery is installed incorrectly, open the back cover, and check whether the positive and negative poles of the battery are installed correctly. If it is installed backwards, reinstall it and the bubbles will be sprayed normally.

2. The bubble machine does not produce bubbles, maybe the pipe of the bubble machine is blocked, you can clean the pipe mouth, or use a thin iron wire to reach into the bubble machine pipe to dredge a few times, and you can spray bubbles normally.

There are many reasons why the bubble machine can't blow bubbles, and the common reasons are as follows:

1. Whether there is a lack of bubble water

First of all, check whether there is still bubble water in the bubble machine can, if the bubble water is gone, it will definitely not bubble, and add the bubble liquid to the can after mixing it with water according to the instructions.

2. Whether the battery is a little bit

If it is an electric bubble machine, check whether it is out of power, try to replace it with a new battery, and if it is out of power or the power is too low, you will not be able to spit out bubbles.

3. Check the machine

Check whether there is an air leak in the machine, if there is air leakage in the bubble machine, it will not be able to spit out bubbles. Or see if the mouth that spits bubbles is broken, this one is broken and difficult to repair, the cheap ones can be thrown directly, and the more expensive ones can be repaired by someone.

Maintenance and care of the bubble machine:

1. Due to the high concentration of hygroscopic liquid in the bubble water, if it is not used or placed for a long time, it will lead to the sticking and blockage of the straw mouth and cannot blow the bubble normally, you can clean the straw part with water or fill the empty bottle with water to make the bubble gun bubble blow until the muzzle can not bubble normally, so as to ensure that the product can be used normally for a long time.

2. It is forbidden to expose the bubble machine to the sun.

3. The purchased finished bubble water cannot be filled with water or other substances.

4. When not in use, the cap of the bubble machine should be tightened to avoid failure or volatilization.

5. Do not soak in water for electric products that are not waterproof.