How do you get the most out of your bike? High Score !!

Drop chain problem: This is more likely to occur in new cars, and some manufacturers use old parts for profit is also a reason.

1) The transmission is not adjusted properly: the transmission of the front and rear wheels has 3 screws to adjust the drive direction of the chain.

2) Aging of the transmission: You can move it to see if the gear adjustment is flexible and whether the chain is idling. If there is a problem, go to the seller for clarification and repair or replacement.

3) Chain aging: Some chain accessories may be old or easy to damage, if you often find slippage when riding the pedal, you must go to the maintenance place to check.

Brake problem: the original factory setting is relatively primary, you can go to the place where the car is repaired or the hardware store to buy a wrench to adjust it yourself, the method is relatively simple and easy to learn, and you can adjust it until you are satisfied, you can also go to the place where you repair the car and ask the master to adjust.

Vehicle quality inspection: The average bicycle is best maintained for two to three weeks when it is used regularly.

Maintenance method: Can be cleaned simply and with loose screws fixed.

If you notice any abnormalities while riding, such as noise from the vehicle, excessive braking noise, or sluggish steering system, it is best to take the time to check it out.

Brake pads can make an uncomfortable noise when used to a certain extent (it's normal to make noises in rainy days), so if you find that the brake pads are flattening, it's time to consider replacing them.

Bicycle adjustment and modification: This is to make the bicycle more suitable for yourself to ride and use, and it can also make the bicycle more personalized.

Method: You can buy your own gadgets such as wrenches.

Hex screwdriver. Screwdrivers, etc., adjust the various parts of the vehicle, such as the brake adjustment mentioned above. Detailed need to practice as the basis, more action and dare to move on it, pay attention to the adjustment must be to ensure the safety of their own driving as the premise.

Change the car: You should go to the car dealership or accessories store, where there are many accessories for you to choose from, such as headlights and brake lights; water discharge rack; Even a trip computer, as well as a variety of decals. There are also people there who can explain it to you in detail, so you can have enough money to make some changes to your car.

You can also find something by yourself, such as pendants or black tape, and use daily necessities is also a way.

That's all. I hope you can find inspiration yourself, maybe you can make the car more personalized @@

Adjust the brake screws.

1) How to protect the plating layer of the bicycle?

The electroplating on the bicycle is chrome plating, which not only increases the beauty of the bicycle, but also prolongs the service life, and should be protected at ordinary times.

Wipe often. Generally speaking, it is advisable to wipe once a week, wipe off the dust with cotton yarn or a soft cloth, and then add some transformer oil or engine oil to wipe.

Don't ride too fast. Usually, the fast wheels will lift the sand and gravel on the ground, forming a great impact on the rim and damaging the rim. Most of the serious rust holes in the rim are caused by this reason.

The electroplating layer of the bicycle should not be in contact with salt, hydrochloric acid and other substances, nor should it be placed in a place where coal smoke is roasted.

If there is rust on the plating, you can gently wipe it off with a little toothpaste. Do not wipe the galvanized layer of bicycles, such as strips, because a layer of dark gray basic zinc carbonate generated on the surface can protect the internal metal from corrosion.

2) How to extend the life of bicycle tires?

Most of the roads are high in the middle and low on the sides, so you must keep to the right side when driving a bicycle. As a result, the left side of the tire is often worn more than the right. At the same time, the rear wheels generally wear out faster than the front wheels due to the rear center of gravity.

If the front and rear tires are used for a period of time and for a while, the front and rear tires are replaced, and the left and right directions are reversed, so that the tire life can be extended.

3) How to maintain the bicycle tires?

The bicycle tires have good wear resistance and bear large loads. However, improper use often accelerates wear, cracking, blasting and other phenomena. Usually, you should pay attention to the following points when using a bicycle:

Inflate in moderation. The deflated tire caused by insufficient inflation of the inner tube not only increases the resistance and makes riding laborious, but also increases the friction area between the tire and the ground, which accelerates the wear and tear of the outer tire. If the air is overinflated and the air in the tire expands, the cord in the tire is easy to be swelled and broken, which will shorten the service life.

Therefore, the pump should be in moderation, more in cold weather, and less in summer; The front wheel gas is less, and the rear wheel gas is more full.

Do not overload. The sides of the various tyres are marked with their maximum storage weight. For example, the maximum load capacity of ordinary tires is 100 kg, and the maximum load capacity of weighted tires is 150 kg.

The weight of the bike and the car itself is divided between the front and rear tires. The front wheels bear the total weight of l 3, and the rear wheels are 2 3. The load on the rear hanger is almost all pressed on the rear tire, which is overloaded and overloaded, which increases the friction between the tire and the ground, especially because the rubber thickness of the sidewall is much thinner than the crown (tread), and often the heavy load is easy to thin and crack and burst at the shoulder.

4) Bicycle chain slippage treatment:

After the bicycle chain is used for a long time, there will be a phenomenon of slipping teeth. This is caused by the wear of one end of the chain hole, and the problem of slippage can be solved by using the following methods.

Since the chain hole is rubbed in four directions, as long as the joint is opened, the inner ring of the chain is turned into the outer ring, and the damaged side does not directly contact the large and small gears, and it will no longer slip.

According to your description, you've been getting the most out of the car so often that it breaks down.

Let's change it. According to your description, this car can no longer stand your toss.

Recommend the ATX 740

Judging by what you described, your car is not good! The new car is at this level, and it is recommended to change it. If you don't want to change cars, modify the handlebars.

To say that it is simple is to change parts, and what part is not good to change. The grade of the mod depends on the size of your wallet. That's really a lot, there's not much else to say.

1. Exercise, save transportation costs, do not need to crowd the subway bus, convenient, and can master the time by yourself.

2. Low carbon and environmental protection.

3. No driver's license required, free to come and go, easy to store.

The benefits of cycling workouts are unlimited time and speed. Riding a bicycle is not only possible, but it can also make you shapely. Since cycling is a sport that requires a lot of oxygen, it can also strengthen heart function.

It also prevents high blood pressure and is sometimes more effective than medications.

Cycling compresses blood vessels, which accelerates blood circulation, and the brain takes in more oxygen, plus inhales a lot of fresh air, and you will feel clearer in your brain. Riding on the bike, you will feel very free and exhilarating. It's no longer just a means of transportation, it's a way to delight the soul.

The structure is simple and easy to ride. Easy to maintain, green and environmentally friendly. In general, it is faster to ride a bike than to walk.

Bicycles are driven by human-powered pedals.

If you really need a road bike, the Giant Wind 900 or the Wind Beacon 2200**It's not expensive, barely meet your requirements, but it's a beam change, and the operation has great shortcomings, but if you want to buy a hand, the cheapest is the wind vane 2700, the original price is two thousand, I don't know how much you can get a discount there.

I also ride a bicycle to school, so how long is the section that I can actually drive at full speed? Therefore, I personally think that it is better to go to school or in the mountains, and it is more flexible to cope with vehicles, so it can pass relatively lightly when encountering various situations, unlike road cars, which are less stable, so that they are not much slower than road cars. A classmate rode a Giant.

A few hundred dollars, very cheap) can also ride at a constant speed of 30 kilometers per hour, which has a lot to do with personal physical strength, so you don't have to deliberately buy a road bike for speed, it is best to suit your riding needs.

For example, a thousand dollars or so in the mountains.

painwolf

In addition, the ATX series is slightly more expensive, and if there is a discount, the low-end models can basically meet your requirements.