How do I find my phone on my computer with a Bluetooth device

Here's how to find your phone on your computer with a Bluetooth device:

1. First of all, open the "Control Panel" in the Windows operating system, and then open "Devices and Printers".

2. Click "Add Device", then Windows will search for the surrounding Bluetooth devices and configure them. It should be noted that before clicking Add Device, you need to turn on the Bluetooth function of your phone, otherwise the computer will not be able to search for the Bluetooth facilities of your phone.

3. Then Windows will automatically search for nearby Bluetooth devices, and the Bluetooth devices that appear will be displayed in our list of devices, as you can see from **, Windows has searched for our Bluetooth devices, then select the mobile phone device, and click "Next".

4. In the next steps, the computer will try to pair and connect with the Bluetooth device of the mobile phone, so at this time, you should pay attention to the Bluetooth pairing prompt information of your mobile phone, and then confirm the pairing connection with the computer on the mobile phone, and then click OK on the computer for the final pairing.

5. Next, if the pairing key of the computer and the mobile phone is consistent, the computer and the mobile phone will successfully establish a Bluetooth connection, but because the mobile phone and the computer are connected for the first time, the operating system should install the driver file and start the Bluetooth service.

6. After the driver is installed, the Bluetooth device will be successfully connected, and then, the Bluetooth device connected to the computer will automatically pop up the main interface of the program, where you can realize the transfer of files and the first function of audio files.

1. Turn on the Bluetooth of your computer and mobile phone.

4. Then you can transfer the files.

I once tried to use XP but the effect is very average, it requires a lot of certification, and many functions can not be realized, it is recommended to use Windows2003, the method is like going upstairs.

Bluetooth devices are rolling down Bluetooth devices, and the specific use methods are:

2. Find the Bluetooth icon, right-click to open the menu, and click Add Bluetooth device.

3. Select the Add Bluetooth device option in the jump interface, and click Li Beichen to enter.

4. Select a Bluetooth device that needs to be connected and click Select. Which Zen.

5. After waiting for time at one end, the connection can be completed.

Bluetooth (Bluetooth headset) connects to the Bluetooth of the mobile phone as follows:

Tools: OPPO R9S, ColorOS W300TWS.

1. First find the app "Settings" on the desktop, and tap the app icon of "Settings" to enter the settings page.

2. Then, find the "Bluetooth" option in the main page of "Settings", and click "Bluetooth" to enter the Bluetooth settings page.

3. Enter the setting page of "Bluetooth", you can see that "Bluetooth" is off by default, and click the switch on the right side of "Bluetooth" to turn on Lanhong's teeth.

4. After turning on the Bluetooth function, you also need to turn on the "Open Detection" function, so that it can be recognized and connected by the Bluetooth headset.

5. After setting, the system will automatically scan the nearby Bluetooth devices that can be connected, and you need to ensure that the Bluetooth headset is powered on.

The steps to connect the Bluetooth headset to the mobile phone are as follows:

1. First find the app "Settings" on the desktop, and tap the app icon of "Settings" to enter the settings page. Hail bumps.

2. Then, find the "Bluetooth" option in the main page of "Settings", and click "Bluetooth" to enter the Bluetooth settings page.

3. Enter the setting page of "Bluetooth", you can see that "Bluetooth" is off by default, and click the switch on the right side of "Bluetooth" to turn on Bluetooth.

4. After turning on the Bluetooth function, you also need to turn on the "Open Detection" function, so that it can be recognized and connected by the Bluetooth headset.

5. After setting, the system will automatically scan for nearby Bluetooth devices that can be connected, and you need to ensure that the Bluetooth headset is powered on.

Bluetooth devices are Bluetooth devices, and the specific ways to use them are:

2. Find the Bluetooth icon, right-click to open the menu, and click Add Bluetooth device.

3. Select the Add Bluetooth Device option in the jump interface, and click to enter.

4. Select a Bluetooth device that needs to be connected and click Select.

5. After waiting for time at one end, the connection can be completed.

It's a Bluetooth device.

Bluetooth is a radio technology that supports short-range communication between devices (generally within 10m), and can exchange information wirelessly between many devices, including mobile**, PDA, wireless headsets, laptops, and related peripherals.

The use of "Bluetooth" technology, can effectively simplify the communication between mobile communication terminal equipment, can also successfully simplify the communication between the device and the Internet, so that the data transmission becomes more rapid and efficient, and broadens the road for wireless communication.

Bluetooth enables some of today's portable mobile devices and computer devices to connect to the internet without the need for cables and to access the internet wirelessly.

If Bluetooth is turned on on your computer, then the program icon for your Bluetooth device will appear on your computer, in the lower right corner. We can right-click on this icon to see some menus, which can be used to add Bluetooth devices, display Bluetooth devices, etc., such as Bluetooth headphones can be added in this way.

Yes, yes, it's a Bluetooth device.

Good luck!

This means that Bluetooth devices that can be connected are displayed.

Yes, computers can also be connected to Bluetooth.

Second, after searching out the device, the computer or mobile phone may have to verify the identity, this is very convenient to connect to the machine, such as entering the verification code such as "1234", but sometimes only the mobile phone can enter the verification code, and the computer does not appear to enter the verification code prompt, three, then at this time, turn off a function in the mobile phone that needs to be verified, that is, set to do not need to verify, and then click on the computer's Bluetooth, when selecting your mobile phone device, there is a checkbox below, "Select Authentication", Remove the tick and you're ready to connect to transfer data!

1. Click the Bluetooth icon in the lower right corner of the computer;

If your computer has Bluetooth function in front of the town, then a Bluetooth icon will appear in the lower right corner of the computer, and you can set it accordingly by right-clicking.

2. When Bluetooth is turned on, Bluetooth is detected;

Tap the Bluetooth icon in the lower right corner and right-click, the Bluetooth settings function will appear, select Bluetooth settings. Once selected, the Bluetooth settings screen will appear, and the Traveler will allow the Bluetooth device to detect the Gousun selection in the Options tab. Then tick the two options below.

3. Turn on the Bluetooth function of receiving files;

If you want to accept files from other devices, then you need to turn on the Bluetooth function to accept files, and only then can you accept files. Right-click on the Bluetooth icon in the bottom right corner – select Accept File.

4. Turn on the function of sending files;

If we want to send a file, then we must turn on the Bluetooth send file function to send a file together, and the function of opening the send file is also very simple, right-click the Bluetooth icon in the lower right corner - select the sending file - select the sending device - select the file to send.

Here's how:

1. Open the Device Manager, and then find "Bluetooth Peripherals" in the other device options, and you will find that an exclamation point appears;

2. When the mobile phone device and laptop are successfully paired, the system will generally pop up a window for the installation of the mobile phone's Bluetooth service driver;

3. However, some mobile phone services and drivers cannot be recognized by our system.

4. Bluetooth peripherals cannot find the driver solution:

On the Bluetooth icon in the lower right corner of the taskbar, you can use the right mouse button to select "Show Bluetooth devices";

In the window that opens, after canceling some of the unpowered services, click the OK button, and you will find that the Bluetooth peripherals are gone.

Here's how to find your phone on your computer with a Bluetooth device:

1. First of all, open the "Control Panel" in the Windows operating system, and then open "Devices and Printers".

2. Click "Add Device", then Windows will search for the surrounding Bluetooth devices and configure them. It should be noted that before clicking Add Device, you need to turn on the Bluetooth function of your mobile phone, otherwise the computer will not be able to search for the Bluetooth facilities of your mobile phone.

3. Then Windows will automatically search for nearby Bluetooth devices, and the Bluetooth devices that appear will be displayed in our list of devices, as you can see from **, Windows has searched for our Bluetooth devices, then select the mobile phone device, and click "Next".

4. In the next steps, calculate that the Oak Filial Piety Machine will try to pair and connect with the Bluetooth device of the mobile phone, so at this time, you should pay attention to the Bluetooth pairing prompt information of your mobile phone, and then confirm the pairing connection with the computer on the mobile phone, and then click OK on the computer for the final pairing.

5. Next, if the pairing key of the computer and the mobile phone is consistent, the computer and the mobile phone will successfully establish a Bluetooth connection, but because the mobile phone and the computer are connected for the first time, the operating system should install the driver file and start the Bluetooth service.

6. After the driver is installed, the Bluetooth device will be successfully connected, and then, the Bluetooth device connected to the computer will automatically pop up the main interface of the program, where you can realize the transmission of Wenliang manuscripts and the first function of audio files.