How to play particles, how to play positive glue in table tennis anti glue

Updated on physical education 2024-04-04
28 answers
  1. Anonymous users2024-02-07

    Particle playing, whether it is positive rubber, raw rubber or long rubber.

    Without exception, they are all rubbers with a low coefficient of friction.

    The ability to manufacture spins is far from that of reversing.

    The weak ability to create spin brings an Achilles heel that is a bad ball arc.

    Once you retreat, you basically have no attack power.

    Therefore, granular glue can only play a role in the near stage.

    Therefore, the anti-glue to the particles, without exception, is to find a way to beat the ball into a long ball.

    Do not entangle with particles near the platform.

    Serve long balls, rub long balls, stretch balls.

    As long as the formation of the middle and the platform hold each other, the advantage of anti-glue is huge.

  2. Anonymous users2024-02-06

    As long as your own ball pulling technique is qualified, the particles, especially the long glue, will no longer be a threat.

  3. Anonymous users2024-02-05

    Hello type of play - straight plate is fast attack (recommended for straight board use, horizontal shooting is not too recommended) positive rubber can use straight shooting fast attack play, we have to learn and inherit this style of play, this style of play forehand must be the skills of fast attack, fast pull, smash, pick, rub, pendulum. The necessary techniques for the backhand are pushing, backside pulling, backside attacking, rubbing, and swinging. China's famous player Liu Guoliang uses a straight racket, with positive rubber on the front and reverse rubber on the back.

    The style of play is a straight board positive rubber fast attack plus straight shot horizontal play, learning the straight board positive rubber fast attack, you can imitate and learn from Liu Guoliang's style of play. First of all, we must be proficient in the necessary technology of the straight shot and fast attack method, and constantly improve the quality of technology, in the guiding ideology, we must first fight quickly and fiercely, and in terms of technical style, we must be fast and accurate and ruthless, so as to achieve a combination of fast and ruthless, fast change and fast turn. Gradually develop your own style of play.

    The supplement is that because the positive rubber is a granular rubber, it is not very good to make spin and eat spin, so when pulling the ball, you should pay attention to the upward angle of the racket, otherwise it will be easy to go to the net. It is very good to use the positive rubber to swing the long and short control of the ball, but if the positive rubber is not well placed, it will be attacked (because the positive rubber is not very sufficient), so you should pay attention to one point when using it.

    Feel free to ask.

  4. Anonymous users2024-02-04

    First of all, work the serve, the positive rubber often gives people the illusion, that is, the spin is not as strong as imagined, in fact, an excellent positive rubber serve is no worse than the reverse rubber spin. Even strong downspin will make it more difficult for opponents to catch it because of a little arch.

    Then it's how to deal with the anti-glue arc ball, once the link of hair extensions is restricted, the other party preemptively pulls up, you must remember to resist, don't retreat, the positive glue plays the anti-glue, the arc ball, the basic positive glue loses more than half as soon as the platform is withdrawn. Near the platform to hit, enclose a board, with a board to strengthen the change of light and heavy landing points. Breaking the continuity of the anti-rubber curve ball is a top priority, and look for opportunities to hit back.

    This is what many older golfers often talk about using "force" to govern "turn".

  5. Anonymous users2024-02-03

    In view of the characteristics of the poor rotation of the positive glue, he sent and did not spin the ball to find opportunities to attack.

  6. Anonymous users2024-02-02

    1. First of all, it is necessary to be clear about the anti-rotation characteristics of the long rubber and master the law of the long rubber return. For example, if you send a downspin ball, the opponent rubs back or arches back, and the ball becomes topspin. You serve an upspin ball, the opponent pushes it back, and the ball turns into a downspin. You pull forward, and the ball pushed back by your opponent is sharp and spins down.

    2. Knowing the rules, you can prepare the implementation of tactics.

    1) Pair long rubber serve: Mainly from the bottom line long ball with and without rotation to the opponent's backhand position, which can take into account side spin. For example:

    If you send a downspin ball, the opponent must take it with a topspin, and you can attack directly. You serve the topspin ball, and when the opponent knocks the ball downspin, you can prepare for a general rush. That's right.

    When holding each other, the opponent's rubbing action, you press, and the ball pushed by the opponent is with downspin. In actual combat, it is mainly a running ball with two big horns.

    2) Receiving the serve 1, the opponent sends a downspin ball, the receiving ball is mainly skimmed, pointed, and picked, and the ball is returned to the opponent's bottom line, it is best not to rub, not to give the opponent a chance to arch the ball. 2. Strive to turn the opponent's serve into topspin first.

    3) Hold: You can use the tactics of rubbing a board and pulling a board. Control the tempo to launch a rush attack, use the plus turn arc circle and the forward arc circle to combine the attack and move the angle.

    You can also hang the ball back directly without rubbing the ball, and then go straight to the attack. It must be forced to retreat, mainly to transfer the two corners of the COSCO platform, and not to give the opponent a chance to control the stage.

    Finally, there are a few things to keep in mind during the race.

    1. Remember the ball, see the rubber color and opponent's habits, especially against players who suddenly fall overboard, which will be more conducive to your tactical play.

    2. Before the game, you must look at the type of rubber of the opponent, whether it is a set of rubber or a single rubber, whether it is small, medium or large. Generally speaking, the single rubber is suitable for knocking, and the rubber is suitable for attacking; The small particles are relatively not very sinking, and the return ball is not very strange, but the large particles are both strange.

    The above is the experience I gained from the main anti-glue to the main long glue.

  7. Anonymous users2024-02-01

    The thin rubber is easy to see normal, and some thick ones can be seen as fakes.

  8. Anonymous users2024-01-31

    Each particle is not less than ,.. long

  9. Anonymous users2024-01-30

    Brother, you are more professional than the national team This problem is not for us to study You just know what is easy to use I don't know what brand is okay As long as you feel easy to use Right The national team is also good They also feel what is easy to use What to use There is no need to study so professionally.

  10. Anonymous users2024-01-29

    The reverse glue is flat.

    Positive rubber, raw rubber, and long rubber are all particles.

    The positive glue particles are short and coarse.

    The raw rubber particles are similar to the normal gum granules, but the gum is transparent.

    Long gum particles are elongated.

  11. Anonymous users2024-01-28

    The picture is not very clear, but it should be positive glue, and there are no particles in the reverse glue. If you play fast attack, you must practice the basic skills solidly, so that the fast attack will be more threatening.

  12. Anonymous users2024-01-27

    Your skills are very good, why don't you know much about them!

    Positive glue: Short-grain rubber, just like your black side!

    Long glue: Long grain rubber, relative to your black side long!

    Raw rubber: rubber with particles pointing upwards and a diameter greater than the height.

    In fact, most people are now using anti-glue, because we are non-professional, anti-glue is easy to use!

    I wish you the bigger the better!

  13. Anonymous users2024-01-26

    You can rely on skipping rope to practice coordination.

  14. Anonymous users2024-01-25

    There may be several types of particles:

    Long glue. — Positive glue.

    Raw rubber.

  15. Anonymous users2024-01-24

    It's Zhengjiao, our teacher talked about it.

  16. Anonymous users2024-01-23

    1. The rubber of table tennis rackets is divided into positive rubber, reverse rubber, long rubber, and raw rubber, but there is no saying that there is long reverse rubber. What you want to express is long gum, right? The reverse glue is that the particles are inward and pasted together with the sea surface, and the final surface is smooth and flat; Long rubber is that the particles are outward, the particles are longer (compared to normal rubber and raw rubber), and the final surface is also long particles.

    2. The anti-glue is more used in the offensive style of play, the friction of the contact ball is strong, and it is good at creating rotation, especially good at manufacturing curved balls and is widely used. The ability of the long rubber to create friction is weak, but the rotation of the ball is very different from the reverse rubber of the same hitting action, which is often easy to cause the opponent's judgment error, and is relatively niche among amateur players and professional players.

    3. There is no saying that the table tennis rubber is long and anti-glue. You must be talking about long glue. Long glue is the particle outward, the particle is longer, and it is softer.

    4. Long glue is used in the chipping ball play, it can not actively create rotation, relying on the power of hitting the ball to hit the rubber particles, thus changing the rotation of the ball (and the rotation of the ball is just the opposite, up to down, down to up), is a "magician".

  17. Anonymous users2024-01-22

    The main thing is that the particles of the racket are different.

    Long reverse glue refers to the fact that one side of the racket is long glue and one side is reverse glue. It is suitable for inverted board play or chipping defensive play, and Zhu Shihyuk is such a configuration.

    Double reverse glue refers to the fact that both sides of the racket are reverse glue. It is suitable for arc circle play or fast arc play, which is the mainstream configuration, Ma Long and Zhang Jike are double anti-glue.

  18. Anonymous users2024-01-21

    The differences between the two are as follows:

    1. The direction of the particles is different.

    Reverse glue is that the particles are inward and pasted together with the sea surface;

    Long rubber is the outward particle, and the particles are longer (compared to normal rubber and raw rubber).

    2. The smoothness of the shooting surface is different.

    The reverse glue paddle surface is smooth and flat;

    The long gel paddle surface is long-grained and coarse.

    3. The usage is different.

    Anti-glue is more used in offensive play;

    Long glue is more used in assault play.

    4. The strength of friction capacity is different.

    The friction of the anti-adhesive contact ball is strong;

    The ability of long rubber to create friction on its own is weak.

    5. The rotation method is different.

    Anti-glue is good at manufacturing rotation, especially good at manufacturing arc balls and is widely used;

    Long rubber is the same batting action, and the rotation of the ball is very different from the reverse glue, which is often easy to cause the opponent's judgment error, and is relatively niche among amateur players and professional players.

  19. Anonymous users2024-01-20

    Table tennis rubber does not have a long anti-glue statement. You must be talking about long glue. Long glue is the particle outward, the particle is longer, and it is softer.

    Long glue is used in the chipping ball play, it can not actively create rotation, relying on the power of hitting the ball to hit the rubber particles, thus changing the rotation of the ball (and the rotation of the ball is just the opposite, up to down, down to up), is a "magician".

  20. Anonymous users2024-01-19

    Reverse glue and long glue refer to two types of rubber; The anti-glue you say should refer to the rubber on one side of the racket or double-sided anti-glue; Long anti-glue is the rubber on both sides of the table tennis board, one side is long glue, and the other side is anti-glue.

  21. Anonymous users2024-01-18

    The reverse glue is easy to make rotation, the glue is granular glue, often used for players with different playing styles on both sides, used for the backhand chipping ball, easy to return the ball according to the quality of the opponent's ball, the greater the opponent's ball power, the stronger the rotation, the higher the quality of the return ball, but it is easy to drift when hitting.

  22. Anonymous users2024-01-17

    Table tennis does not have a long anti-glue, only positive glue and anti-glue.

  23. Anonymous users2024-01-16

    The reverse glue is the direct bonding of the particles and the sponge, the surface of the shot is a flat positive glue, the long glue is the direct bonding of the rubber surface and the sponge, and the particle surface is a double reverse used to hit the ball, that is, the reverse glue that is pasted on both sides of the forehand and backhand.

    In addition, this particle is not less than 10 grains per square centimeter, no more than 50 grains, and it should be evenly distributed.

  24. Anonymous users2024-01-15

    The rubber is divided into four kinds of anti-glue, positive glue, long glue, and raw rubber, the anti-rubber particles are inward, and the other three particles are outward, the positive rubber is the diameter and height of the rubber particles, and the raw rubber is the diameter of the particles is longer than the height, and the long rubber is the height longer than the diameter, and there is a semi-long glue in the long glue, and the difference between the long glue is that the particles are not so long, but it is still the height of the particles longer than the diameter. The landlord said that the double-sided long anti-glue did not have this statement, it is estimated that the landlord heard it wrong, the correct statement should be a side of the anti-glue and a long glue, and it can be said that the front of the anti-glue and the reverse of the long glue, or the front of the long glue and the reverse of the anti-glue, but the second kind has not seen ...... at present

  25. Anonymous users2024-01-14

    Forehand reverse glue, backhand long glue. Or forehand long glue, backhand reverse glue. See how it works.

  26. Anonymous users2024-01-13

    Yes. It can only be explained this way.

  27. Anonymous users2024-01-12

    The amateur is still very tough, but the professional players can't exert their strength because of the many balls in the positive glue, and they will be crushed by the anti-glue. I think the advantage of Zhengjiao now is that I can catch the opponent off guard in the amateur game, and I have a dozen plays with those who have never seen Zhengjiao. It can be said that the biggest disadvantage of Zhengjiao is that it cannot retreat, because it cannot be fast-attacked if it retreats, and the rubber restriction cannot pull a strong arc circle, and the whole is passive.

    It's not that the positive rubber can't be withdrawn at all, but if the forehand attack is against the stage after retreating, even the national team's positive rubber can't beat the city team's anti-glue. In rotation, it can't compare to anti-glue. Take, for example, a low-flat ball with strong underspin.

    Positive glue can basically only rely on a small pull board. It is very easy to be washed off by backglue.

    If professional, you double-sided reverse glue, the opponent has a positive glue, then use the arc ball to pull him to death, find a way to play into the middle and far platform to pull, unless the opponent has a strong chipping skills, rubbing the ball can achieve a great advantage (even if the foundation is strong, it is also passive defense, the chipping style of play itself is a bit passive, the offensive initiative is in your hands, pay attention to control the rotation and line change, predict the opponent Your winning chance is great).

    If you are an amateur, you can use the spin ball as the main control method, and wait for the opportunity to use the curve ball to solve the problem, because it is more difficult to spin the amateur positive glue.

    Note two things:1The most important thing for arc circle players to play with the rubber is to pay attention to the rhythm, when pulling, we must pay attention to the front and rhythm, and we must strive for the initiative, do not reduce the use of the arc circle because the opponent is very uncomfortable, otherwise it is still very uncomfortable to let the opponent get started with a small knock, and try to take the initiative to get started.

    2.This kind of particle rubber must not let him take the initiative to attack, otherwise it will be difficult for you to defend. The best way to prevent him from taking the initiative to attack is for you to attack, the particles will be crooked after a few blows, and at this time he will lose himself as soon as you pull the board over.

    Also, don't be afraid of him when you see the particles, in fact, the particle control is very poor, as long as you are familiar with the performance of the granule glue, the person who uses the granules is more bottomless than you, because the particles can only play high balls or semi-high balls, a pull must slip, you don't attack him, he himself loses the ball.

  28. Anonymous users2024-01-11

    Positive glue is a fast attack method near Taiwan. Therefore, it is necessary to force Zhengjiao to retreat.

    Serve, come out with a downspin ball, hold each other, and split the baseline.

    Pay attention to tactical use such as left and right maneuvers.

Related questions
14 answers2024-04-04

"Screwing": It can be understood as "pulling" the ball in the table, and the ball that is "screwed" out is the topspin ball. >>>More

12 answers2024-04-04

First, there are two types of base plates to choose from. >>>More

4 answers2024-04-04

You can practice the work in your hands well, and if you are proficient, it will be fine.

10 answers2024-04-04

You can try this: when you play the ball, tilt your racket 45 degrees, so that it can have an arc spin, when you hit a very rotating ball, you don't need to rush, use the 45-degree inclined racket to lift lightly, and the ball can pass; If the opponent's ball is very off, you can touch your racket lightly and the ball can pass. >>>More

14 answers2024-04-04

Mix with water and dish soap, apply it to it, and rub it with water.