How to remove inorganic glue from table tennis?

Mix with water and dish soap, apply it to it, and rub it with water.

Summary. 1. Brush the racket with white glue twice. (Wait until it's completely dry before brushing it a second time.)

2. Rubber brush two to three times. (All dry.) 3. After it is completely dry, the rubber brush expands the oil two to three times.

The glue I use is Double Happiness inorganic glue, and the expansion oil is Dianchi expansion oil.

Kiss: Under normal circumstances, you only need to stick the inorganic glue twice when sticking the table tennis racket.

Both sides are doubled.

The main thing is to make this glue a little more sticky.

Ensure that the rubber does not fall off.

Brush the bottom plate a few times.

1. Brush the racket with white glue twice. (Wait until it's completely dry before brushing it a second time.) 2. Brush the rubber circle two or three times.

(All dry.) 3. After it is completely dry, the rubber brush expands the oil two to three times. The glue I use is orange and red macro double happiness inorganic glue, and the expansion oil is Dianchi expansion oil.

Twice. Which is better, the table tennis of upright or double happiness.

Double Happiness. Within 200 yuan, Double Happiness is suitable for fast attack combined with arc circle seven-layer pure wood bottom plate.

Is there still Jinji 7?

Nope. Within 200.

Just push this. What about the rubber.

I don't recommend rubber in this regard.

The rubber I use is more expensive.

I haven't used that kind of cheap one.

I can't put into words the sense of experience.

How about a forehand mad triple backhand g888.

The evaluation and experience of this rubber are okay.

Basically, I haven't bought it, and I don't say that the experience is particularly bad.

I hope mine can help you.

Good luck with your admission.

Organic glue can enhance the elasticity of the sponge to a certain extent because it can help the sponge swell, so that the elasticity of the paddle increases, but it contains certain chemicals and has certain toxicity, so it has been banned from being used.

1. Table tennis rubber raw rubber, positive rubber, long rubber introduction.

Table tennis raw rubber: the rubber particles are upward, and the diameter of the particles is greater than the height. It is characterized by the sinking of the ball after hitting the spin ball, and the weak rotation after rubbing the ball, and its speed is faster than that of the positive rubber.

Table tennis positive glue: the rubber particles are upward, and the height of the particles is equal to the diameter. It is characterized by good elasticity, fast speed, no eating and turning, and stable batting, which is suitable for fast-attacking players near the table.

Table tennis long rubber: the rubber particles are upward, the particle height is longer than that of raw rubber and positive rubber, and the particles are softer than raw rubber and positive rubber. The characteristic is that the return ball is reversed, and the ball path is erratic, if the top spin ball is connected, the return ball becomes a downspin and flies back; Another major feature of the long glue is to use the chipping ball to hit the arc ball, and the curve ball turns and sinks the ball more and more.

This kind of rubber ball plays with a lot of mistakes by opponents, but it is not easy to master by yourself.

2. Service life.

Rubber rubber has a lifespan and cannot be used forever, and poor performance rubber will prevent the ball from rubbing against the rubber surface, which will make it difficult to handle the ball with strong rotation.

The rubber replacement time depends on the amount of time used and practice, and the more time you play, the faster it will wear out. Even if you don't practice regularly, vinyl surfaces can age over time.

Paste the inorganic glue on the sponge layer, the recommended amount is 1 yuan of RMB steel hammer, not too much, (if the racket has a large amount of residual adhesive before, you can pick it off first) use the inorganic glue special sponge to evenly spread.

Organic glue is toxic, inorganic glue is water-soluble glue and non-toxic.

However, in terms of elasticity after viscose, the elasticity of organic glue is significantly greater than that of inorganic glue, and it has certain advantages in strength, speed and rotation.

If it's just an amateur game, it's better to use an organic one, and there is no test requirement for the game anyway. Inorganic glue is more troublesome to stand up, and it is not as organic as elastic after sticking.

Now the International Table Tennis Federation has banned the use of organic glue because it is toxic, but the racket sticky with organic glue is elastic and very comfortable to pull the ball.

Organic glue is a glue that also has chemical components to help volatilize and help the sponge swell! However, due to its strong volatility and chemical composition, it has great damage to human respiratory organs! But the advantage is that it dries quickly (2-3 minutes to dry quickly) and can enhance the elasticity of the sponge!

Inorganic glue is a water-soluble glue that does not contain chemical components, which is the most minimal for sponge expansion, and is harmless to the human body because it has no chemical components! It takes 12-24 hours to air dry naturally, and about 10 minutes to blow continuously with a hair dryer! Of course, because it cannot play a role in the expansion of the sponge, the elasticity will be greatly reduced, and the glue can not be integrated into the sponge, which will reduce the ball speed and quality!

Since it mainly depends on whether it contains chemical ingredients, and there is a precedent of being stunted by organic glue, it is necessary to use inorganic glue for the health and safety of athletes!

Don't underestimate the difference between organic glue and inorganic glue, it has a great impact on athletes, but it has a great impact on people with an average level, the impact is not very large, we are mainly using organic glue now, although it is toxic, but the toxicity is not great, I have used inorganic glue once, it is difficult to apply.

The disadvantage is that it is toxic and has a large odor. Sometimes it is easy to open the glue. The advantages of inorganic glue are that it is odorless, non-toxic, sticky, and not easy to open.

The disadvantage is that it is expensive, sometimes the viscosity is too large, and it is inconvenient to replace the rubber sleeve. Therefore, you belong to the category of frequent replacement of the set of glue, so that the organic glue is also good; If it is a set of glue for a long time, use inorganic glue.

However, it should be reminded that the recent cake sponge set of glue, especially the high-grade coat, because the sponge pores are very large, the hole wall is very thin, if you stick with organic glue, it is easy to damage the sponge due to swelling, affecting the performance of the sleeve, so it is necessary to paste with inorganic glue.

If you are satisfied, thank you

Inorganic glue refers to the suspension formed by mixing natural rubber and other substances with water, and adding a certain stabilizer. The most typical feature is that it is milky white, so golfers also call it white glue, and some have no smell, such as Double Happiness 15, which can hardly smell anything. Some inorganic glues have an obvious smell of ammonia, such as Dianchi, Lili, Shiaode G20, etc., and there will be an ammonia smell during use.

The brushing process of inorganic glue is relatively complicated. Pour a little inorganic glue on the rubber sponge or bottom plate, brush it well with a sponge strip in one direction, dry it with a hair dryer or wait for it to dry naturally, but because its container is water, it is almost non-volatile, so it takes a long time to dry naturally. The criterion for judging whether the question is dry or not is that the white inorganic glue completely becomes colorless and transparent.

Generally, the rubber of the bottom plate can be dried and glued twice each. The ** of inorganic glue is generally higher than that of organic glue, and the operation is more complicated, with almost no elastic effect, and only plays a role in adhesion. But the benefits are also very obvious, inorganic glue is green and environmentally friendly, there is no harm to the human body, high paste strength, good moldability, making it particularly convenient to remove glue in the future.

After the glue layer is thickened, it can be torn off quickly by reverse tearing glue without hurting the sponge.

Organic glue is good, it can make the sponge swell, I am not a glue lover, inorganic glue only plays a role in adhesion.

** Words or organic glue is real.

Organic glue is toxic.

But better.

Since the previous year, the International Table Tennis Federation has stipulated that organic glue is not allowed in competitions.

Therefore, the new sets of glue are all combined with inorganic glue. As long as you brush it a few more times, the performance will also go up.

I have torn off all the rubber that had been brushed with organic glue before, cleaned the board, and then applied the new rubber with inorganic glue.

Buy inorganic glue and go!!

Summary. Hello, if it is a table tennis match, the table tennis racket must be used with organic glue.

Hello, if it is a table tennis match, the table tennis racket must be used with organic glue.

Hello, the general table tennis game ball Zen socks are inorganic glue, and organic glue good land water has been banned by the International Table Tennis Federation, the main reason is that it is slightly toxic, and he Hong has a negative effect on the user. Due to the excellent swelling effect of organic glue, it is also widely used in the amateur world.

The characteristics of organic glue The main components of organic glue are rubber molecules and organic solvents, and the rubber molecules left after sol volatilization are cross-linked into polymers, which play a role in eliminating adhesion. The composition of glue is usually organic solvents. But this glue will only be used in amateur places.

Hello dear to table tennis competitions with inorganic glue At present, international table tennis competitions use inorganic glue. In the new ITTF (International Table Tennis Federation) rules implemented on May 1, 2015, the official rule is to replace the previously widely used water-based organic glue with water-based inorganic glue. The difference between inorganic glue and organic glue is that their composition is different.

Inorganic glue is mainly composed of cellulose silicate and the products of its secondary chemical treatment, such as crystal glue, as well as ethoxysilane glue, such as domestic Hebei Jialede table tennis glue. Organic glues, on the other hand, mainly use synthetic resins containing organic substances such as phenyl groups. The advantages of inorganic glue are that the adhesive force is durable and stable, the damage to the racket laminate is small, it is easy to clean with water, and it is also friendly to health and the environment.

Although organic glue has the advantage of strong adhesion, it has volatile harmful gases and damage to the rubber material on the racket, and long-term use may cause health effects on the human body. Therefore, inorganic glue has gradually become the mainstream of modern table tennis competitions.

1. Treatment of glue residues on the bottom plate. If it is not cleaned, the next time the rubber is peeled, the rubber will be damaged, and the bottom plate will fall wood chips, and it is particularly important to remove the glue in time for Stika and butterfly boards (these two types of rackets are easy to drop wood chips from various models). 1. The general glue residue can be rubbed directly by hand until the bottom plate is smooth.

2. Glue stains on the bottom plate that have existed for a long time. Brush a layer of glue on the bottom plate first, and the glue is best to choose a slow-drying type, such as Haifu ordinary glue, and after the glue is basically dry, rub the rubber surface of the waste rubber (not a sponge) vigorously, and the effect is very obvious. The focus of the action is that the glue can not be too dry or too wet when rubbing the glue, and the glue liquid disappears to start it, and the effect is not good if it is late.

The principle of degluing in this method is: using the characteristics of glue miscibility, so that the new glue dissolves the old glue. The reason why you can't use quick-drying glue is that the glue is too dry and dissolves into one with the glue, so you can't remove the glue, if you can't achieve the desired effect at one time, you can wait for the bottom plate to dry and then repeat the above process.

I have used this method to remove several glue stains from the finished product more than ten years ago.

Second, the treatment of glue stains on the rubber (set of glue).

a, with glue brush directly with the hand rubbing, glue should also choose the slow dry type, hands-on time second, the advantage of this method is that the damage to the rubber is small, the disadvantage is that the hand is very tired and painful;

b. For some older rubber, you can brush the glue once, rub it with the rubber surface of the waste rubber, pay attention not to use too hard, otherwise it is easy to damage the sponge, and the direction of rubbing is best from the position of the handle and then down, because this position is not cut and is not easy to break. The advantage of this method is that it is fast and labor-saving, and the disadvantage is that there is some damage to the sponge. It is emphasized that the above method A imported rubber sleeve should be used with caution, and method B is only applicable to domestic rubber sleeve, and imported rubber sleeve is prohibited.

The imported rubber is too brittle and will break when touched).

Personally, I recommend that if you rub the skin too handy, I use small tape, so I directly use smooth tape to rub the glue instead of fingers.

If the glue sticks to the surface of the rubber, the area is small. You can try to wipe it gently with gasoline, and you can't use it too much, as more will affect the elasticity of the rubber and sponge. If there is a lot of glue, you can't use the method just now, you can only replace the rubber.

Do not use gasoline in small quantities!!

Alas! After you get the rubber off! Don't stick anymore!

1. Start with a rag! Get the water in the sky! Wipe it clean vigorously! I scrape on the bat with a blade!

2. Wait for him to do it! Then glue it to the bat! Rubber too! I repeat it exactly twice!

3. Glue it on again! Press down it with a wooden stick! Roll over every section!

4. This is a big announcement!!

If there are other questions or parts that are not clear enough, please continue to ask. Thanks for adopting!

Summary. Hello, it's okay to kiss, but there are a few things to be aware of. The viscosity of organic glue is higher than that of inorganic glue, so it will be slower when slapping, so pay attention to the strength of the slap, not too much, otherwise it will affect the ** force of the ball.

In addition, the grasping force of organic glue is greater than that of inorganic glue, so pay attention to the strength of grasping the ball, not too much, otherwise it will affect the ** force of the ball. Finally, the abrasion resistance of organic glue is stronger than that of inorganic glue, so pay attention to the frequency of slapping, not too high, otherwise it will affect the ** force of the ball. In short, it is okay to change to organic glue, but pay attention to the above matters so as not to affect the ** force of the ball.

Table tennis inorganic glue I want to change to inorganic glue, is it okay?

Hello, it's okay to kiss, but there are some things to pay attention to. The viscosity of organic glue is higher than that of inorganic glue, so it will be slower when slapping, so pay attention to the strength of the slap, not too much, otherwise it will affect the ** force of the ball. In addition, the grasping force of organic glue is greater than that of inorganic glue, so pay attention to the strength of grasping the ball, not too much, otherwise it will affect the best force of the ball hold.

Finally, the abrasion resistance of organic glue is stronger than that of inorganic glue, so pay attention to the frequency of slapping, not too high, otherwise it will affect the ** force of the ball. In short, it is okay to change to organic glue, but pay attention to the above matters so as not to affect the ** force of the ball.