In Windows 7, what are the two categories of scrollbars?

Updated on technology 2024-04-29
13 answers
  1. Anonymous users2024-02-08

    First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause

    break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, and if it is a multi-system user, keep the "Show operating system list time". The dot "" determines that the additional properties of the launch item are.

    fastdetect instead of nodetect, don't add it yet.

    noguiboot property, as guiboot will be used later.

    The next step is crucial, open the "Hardware" tab in "System Properties", open "Device Manager", "IDE".

    ata/atapi

    Controller", double-click to open the "Secondary IDE Channel" property, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected as "None", click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

    Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

    Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

    After enjoying the fun of the fast restart, let's further speed up the startup speed and open the "System Properties"-

    Advanced "-"Boot and Failback" settings, open the "System Boot" area, and add after fastdetect.

    noguiboot so that the scrollbar is no longer displayed at startup. If you really like the scroll bar display, you don't need to do this step.

    ps: After testing, the computer is not well configured, the memory is only 128MBXP system, after optimization, the boot time is significantly accelerated, and the scroll bar only needs to turn more than 1 turn to open the system impatiently.

  2. Anonymous users2024-02-07

    The bottom scroll bar has been eliminated in the left navigation bar of win7 system computers, which is Microsoft's setting. 1. If you want to see more information, you can adjust the width of the left navigation bar; 2. Stay on the edge of the scrollbar on the right side, and it will change to a two-way arrow on the left and right; 3. At this time, drag the mouse to adjust the width.

  3. Anonymous users2024-02-06

    Solution: 1. Press the win+r shortcut key on the keyboard at the same time to open the running window of the computer, in the open running window, enter regedit and click enter to open the registry window of the win7 flagship version of the computer; 2. In the open registry window, click Hkey Current UserControlPanelDesktop. 3. Then find the option of foregroundlocktimeout inside, double-click to open the item, and change this value to any 6-digit digit or more than 10 (the system defaults to 200000 milliseconds hexadecimal 30d40).

  4. Anonymous users2024-02-05

    Win7 Explorer double-clicks the left directory when the scroll bar always runs back to the top,Can't locate the position of the folder at the current point,To continue to open the next level of directory,You have to drag the scroll bar to pull down,And the first time you click the small arrow,It's too troublesome to use。

    What a failure!

    Who knows if you can adjust it so that the scrollbar doesn't run too much, but is positioned at the current click, like XP?

    In this case, the system is generally scanning the file list, and the speed is generally very fast, sometimes the computer cannot be scanned when the damaged USB flash drive is plugged into the computer.

    Also, the hard disk can't reflect it, I don't know if your hard disk has a relatively large load at this time, for example, there are multiple copy or move tasks in progress.

    The worst case scenario is that your hard drive is broken, it is best to use hd-tune to look at the health column, pay attention to whether there is a yellow warning, and if there is a screenshot, send a screenshot.

  5. Anonymous users2024-02-04

    Since Windows 7, many interfaces of the system have begun to be different from XP's, and Explorer is one of them.

    The scroll bar at the bottom of the landlord is to adjust the width of the quick folder left and right,In win7, it is omitted,Microsoft is for the sake of beauty,You can put the mouse on the side of the scrollbar,As shown above,The pointer becomes a horizontal double arrow,Then you can drag it。

    If you move it up or down, you can move the scroll bar up and down.

    I'm a computer IT person.,If you have any questions in the future, you can always find me.。。。

  6. Anonymous users2024-02-03

    Win7 is really not left and right,Instead, when you want to click on the file tree, it will automatically move the file tree to the right.,This is used to the left and right scroll bar friends do feel uncomfortable.。

  7. Anonymous users2024-02-02

    If there are no subordinate folders in your folder, there will be no subfolders.

  8. Anonymous users2024-02-01

    Win7 doesn't have it in the first place, because it's not easy to use at all, so it's better to drag the edge to enlarge it.

  9. Anonymous users2024-01-31

    This kind of problem may be a keyboard problem or a virus.

    You can unplug the keyboard on your computer, and if it stops scrolling, it's usually a keyboard problem, such as a stuck or short-circuited key such as a page turn key.

    Unplugging the keyboard is still a problem, usually because of the virus, antivirus or reinstall the system.

  10. Anonymous users2024-01-30

    If the type of viewing is different, the display will be different, and you can see it in the window.

  11. Anonymous users2024-01-29

    You can't modify it directly, you can only adjust the resolution and adjust it as a whole.

  12. Anonymous users2024-01-28

    Win32 level can't be realistic, right, the scrollbar is wrapped in the CWND class. Lower level than win32,Microsoft is closed and doesn't let you see the source code。

    Ordinary people can't do it.,I guess only the kind of bull who can decompile the Windows kernel has a way.。

  13. Anonymous users2024-01-27

    Hello, you just need to press F11 after the page is maximized, and your situation is not maximized, but fullscreen, and there is no right slider after fullscreen. F11 can switch the browser's browsing mode, or you can change it in the browser's settings, if not, press F11 a few more times.

    If there is still no scroll bar you want,It should be a problem with browsing the limb seller,You can change the QQ browser I use to surf the Internet,It doesn't have this problem,And it opens the web page quickly,**Things are also more powerful,More importantly, it can use QQ login,Very convenient。

Related questions
5 answers2024-04-29

It may be that there is a problem with the data cable.

5 answers2024-04-29

Windows 7 Chinese files or folders can be managed using Explorer or the "My Computer" window. >>>More

27 answers2024-04-29

There are several main things to set the desktop and taskbar icon size: >>>More

12 answers2024-04-29

Graphics card issues. Check to see if your graphics card driver is installed. Or the graphics card is not compatible with the motherboard.

14 answers2024-04-29

No, at least the built-in themes are not supported.

You need to use a third-party tool. >>>More