XP always freezes or blurs when entering the scroll bar 15

Graphics card issues. Check to see if your graphics card driver is installed. Or the graphics card is not compatible with the motherboard.

Plug and unplug the graphics card several times, or delete the device and reinstall the driver.

Master Graphics! I've also encountered such a problem, and there is that the IDE interface of the hard disk cannot be replaced after the system is reinstalled, and sometimes it will not be turned on even if it is replaced.

Use a tool to detect whether there are bad sectors in the hard disk, formatting and partitioning will not solve the bad sectors! Sometimes you can enter the system, and it is normal, the card is obviously card The motherboard is good, it may be caused by the access to the files on the bad sector when the system starts, but the data is not completely damaged, just difficult to read and write, which is a precursor to the bad sector of the hard disk, so sometimes you can also enter the system, it is recommended to comprehensively detect the hard disk, of course, the detection effect of each tool is not the same, depending on how you choose, shield the broken space, in the installation of the system, the problem should be solved, but other possibilities are not excluded, Memory quality problems will also cause the failure, especially the XP system has harsh requirements for memory, and the bad quality strips can be used under the 9X system, but not under the XP! Try to change the memory first, not in the detection of the hard disk, the probability of bad sectors of the hard disk is the largest!

Calling the original CMOS and trying it can generally solve this kind of problem.

Let's change the disc!

The power settings don't match.

Changing a disc is right for you.

Change the graphics card Thank you! It was good before, but there is no guarantee that it is good now

Normal,It's like if you open n more games and then open the browser will get stuck in a reason··· The computer takes on a little more tasks when it is turned on, and that's it.

Driver problems, you can update the driver to try!

I'm a rookie, don't smash my .........

In addition, the virtual machine group is on the product**, which is super cheap.

1) Press the F8 button when the power is turned on.

Double-action, the advanced selection menu appears in the release hand, select to enter the BAI "VGA mode" and press enter to log in to the DU system. zhi

After logging in: right-click on the DAO desktop and select Properties Settings Advanced Adapter List all modes Drag the scroll bar up and down, and click to select "1024*768, true color (32-bit), 75 Hz, LCD selection 60 Hz", click "OK", click "Apply" OK, and finally restart the computer (or set the appropriate resolution by yourself).

If there is a hardware cause, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it (first soft and then hard, restore the system or reinstall it must be done, if not, it may be that there is a problem with the graphics card driver?) ）。

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

Have you changed anything recently, such as drivers, or installed any software?

1. Restart the electric inner brain, press F8, and the selection menu will appear.

2. Select the last correct configuration, try the safe mode, if you can enter the safe mode, you can uninstall the recently installed software or driver.

3. If this is still the case, you can only redo the system.

Probably he has two reasons: 1The background is still running;

2.Infected with a Trojan virus.

Turn on and press F8 to select the last correct configuration to go in and back.

I heard that it was caused by the update.

Show A0 000000ed

It's a problem with the hard disk, first check the hard disk data cable (but, this is indeed a precursor to the hard disk to be bad), in short, you can use the tool disk DOS to execute chkdsk

r command to check the repaired hard drive.

Most of the black screen is related to memory, starting from memory.