Please help sunxh2! Thank you!!

Alexhao makes a lot of sense, the main thing is what direction you are interested in. Huali and Donghua are both engineering, and engineering students have to do a lot of experiments, but the most important thing to do experiments is actually the idea and experimental design, and the hands-on ability should not be too weak. Strong Donghua is fiber processing, Huali is anticorrosive materials and polyester synthesis (unsaturated polyester, medical materials, etc.), I basically can't remember the name of the tutor, you can take a look on the Internet.

They are generally dissatisfied with the recruitment of students in their own school, so they must recruit other schools, and if your current school is even better than them, there is no reason to discriminate against you, but if the school is too poor, for example, the original chemical vocational school (many promoted undergraduates) to take the Huali examination, the tutor will naturally be very cautious. The Chinese Academy of Sciences is not easy to test, but it is relatively fair, and the difficulty of the Institute of Chemistry and Organic Science is not lower than that of Peking University and Fudan at all. It is impossible for the school to have its own undergraduate, and this phenomenon cannot be found.

sunxh2, I really know a lot about polymers, hehe.

I've asked him before.

I'm a graduate student at Donghua, and I'm now working on carbon fiber. Undergraduate Polymers.

At that time, it was also wandering between East China and East China.

I think the main thing about your question is that you prefer that direction.

If it's fiber, it's definitely good, if it's not fiber... Don't come to Donghua.

As far as I know, Donghua University is a relatively good school, very easy to get into, and has been expanding its enrollment recently, and wants to run a graduate school. So you can basically go online as soon as you go online.

On the other hand, there's a lot of delicious food here, hehe.

What's the problem.

Interest is still very important, and it is recommended that you still put interest first. Polymers are directly related to chemistry, if you like chemistry very much in middle school, and you learn it well, you can learn polymers. The most relevant aspects of mechanics are solid geometry and physics, and if you prefer and are good at both, you should continue to study mechanics.

In addition, it is recommended that you check the training objectives of these two majors and the basic courses of the majors online, choosing a major and changing majors are major events that determine your life, and you can't help you make a decision because of my words. On the one hand, you have to search for more information, and on the other hand, you have to discover your true passions. From the beginning of college, you must learn to ask for help and make your own decisions.

Most of the successful careers and the high salaries in the future are not for the goal of money, or the same sentence: do what you like, material rewards are only the inevitable result of your efforts to do what you like.

If you don't understand anything by learning management directly, it is recommended that you work for a few years first. It doesn't have to be a foreign company, in fact, good private and state-owned enterprises are also good. It should not be difficult for undergraduates to do sales, and many companies will recruit management trainees for purposeful training, and then engage in middle management.

There are no special requirements for foreign companies, it depends on different companies and job requirements.

I know about the school of Southwest Science and Technology, but its polymers really make me think of anything that impresses. But the thing is that the undergraduate is mainly basic and broad training, the influence of the school is not too big, you can take the postgraduate examination can be admitted to those schools with better polymer but average comprehensive strength: Nanjing University of Technology (formerly Nanjing Chemical Industry), Hebei University of Technology, Qingdao University of Science and Technology, Zhejiang University of Science and Technology, Jilin Institute of Chemical Technology, these schools basically do not discriminate, the strength of polymers is also recognized by everyone, as long as you are enough, there will be no discrimination.

If you have a good score, good English, or good interview performance, you can make up for the weaknesses of the school, otherwise they will definitely admit students from relatively better schools under the same conditions, which is understandable.

It's not important.

The score is the most important thing.

Strength is everything!

What's the use of you thinking so much here?

It's better to set a goal and work hard every day.

You don't even have the time to think about it now!

Definitely? It's about the same strength as you!

If you can't do it again, just refer to the school and information of your professional brothers and sisters, and you will be discriminated against!? Which school doesn't protect its children, why can't Xike produce talents!

You're already mentally failing to think like that!

Again, strength is everything!

The young man has failed!

Afraid of hair! Don't be impetuous, I am now in the impetuousness of the postgraduate entrance examination!

Don't be impetuous if you want to take the test!

Impetuous words My failure in February will lead you to the future!

It's good that Lao Tzu doesn't discriminate against them, and they dare to discriminate against us?

There is a difference, not much of a difference. There are relatively few people who make polymers in Warren, and the part that makes biological polymers is counted in biomedicine, so it is relatively thin. The general trend is that the key cultivation disciplines will be turned into key disciplines after three years, and the one of Warren is evaluated in 07, so 10 years should be a key discipline.

And there is no need to pay too much attention to this thing, and most companies will not notice it. For example, Northwest University of Technology is a national first-class key discipline of materials science, but its employment and influence are far inferior to many non-key discipline colleges. There are many things that the Ministry of Education evaluates that are unreliable.

Science generally does not test mathematics, and the only science schools I know of are Fudan, Wuhan University, Nanjing University and Zhejiang University. Fudan is based on different research directions, Wuhan is inorganic + physicochemical + analytical + high physics and chemistry organic chemistry, Nanjing University is the selection of high chemistry + university chemistry instrumental analysis, Zhejiang University is the selection of organic + physical chemistry (high physics + mathematics). Others, such as Peking University, Nankai University, Jilin University, University of Science and Technology of China, Institute of Chemistry, and Institute of Applied Chemistry, all have to take the high physics and high chemistry.

In fact, if you haven't studied it, you can go to your school's polymer major to audit, and discuss it with the teacher. After all, the things you want to take the exam are polymer physics and chemistry, and you should still learn some of them, and if you don't take the retest, you won't be involved in them. The above are all personal thoughts and are not authoritative.

I am also preparing for the 2011 Polymer Physics and Chemistry exam.

You're all set to this point, and of course you're going to stick with it. It's hard to find a job now, but it's still worth it to go to a graduate school in a prestigious school. You can get it first, and then decide how you want to spend your graduate studies based on what you want to do in the future.

Persistence is still meaningful, and graduate students are also a good training of people's abilities. As for the help of others, it is only a secondary factor, and if you are well prepared, you will definitely be able to pass the exam.

HKUST is a science major, and the name of the science major is polymer chemistry and physics. Materials chemistry is too broad and not specific. What courses do you go to the University of Science and Technology or the Ministry of Education, which has training requirements and compulsory courses for each major.

It should be that polymer chemistry and physics are the most suitable for university studies, and university majors should be studied more under the conditions possible. Therefore, polymer chemistry and physics are more suitable.

Most of the polymers are under the chemistry department, and most of the synthetic and functional polymers are under the chemistry department. I don't think this is the main problem, and there is no need to draw a unified conclusion, before applying to each school, you must go to their ** to see, you see which department their polymer major is located in, you will apply for which department. As for the school, if you are only an undergraduate of Qingdao Science and Technology and have no outstanding highlights, apply to those colleges and universities where the school is not well-known and the polymer is okay.

Now that you know his account, send him a message directly. Wait, wait, when?