Is it better to light engraving or flash engraving with a recorder? Are discs the same?

Now the mainstream is flash carving, which is fast, good and durable.

But whether it is light or flash, it does not have much effect.

The flash disc is much higher than the general disc**, and it is not practical to make a light sculpture, just to print a picture on the back of the disc, you have to buy a special flash engraving disc, and many places have not been able to buy a flash engraving disc. It is better to take a pen and make a mark on an ordinary disc to save trouble and money.

Categories: Computer, Networking, >> Hardware.

Analysis: In essence, photoengraving technology is not a disc engraving technology, but a kind of use of a special recorder with photoengraving technology to carry out text or images such as labels, titles and other words on a special photoengraving disc"Print"technology. It has nothing to do with the reading effect of the engraved disk.

It has the advantage of being able to easily label the engraved disc immediately and permanently accurately.

Depending on your situation, it may be that the format used to engrave the disk for you is not compatible with your VCD *** machine. Because burning a disc has its own format of the magic bridge. Currently, the only common format is ISO-9660, which is the only format that can be used to read out disks smoothly for all readers.

Other formats include HFS (for Apple), Romeo (for Adaptec), and UDF. In addition, it is also possible that the mode during burning is incorrect, and the incorrect mode will also cause the disk reading to be unsmooth.

It is advisable to try again, paying particular attention to the format and mode of engraving.

Regarding your other question, whether dw1626 or dw1640 is better, I personally think that if you don't need light mapping technology very much, dw1640 is better. First of all, the 1640 is 8 times the speed of burning, while the 1625 is 4 times the speed of burning, and the 1640 is faster than the 1625 disk; Secondly, the 1625 with photoengraving technology also has high requirements for the disc, the photoengraving disc is about 6 times that of the Pusheng Li Tongpan**, and the consumable ratio is 1640; Finally, from the analysis of **, the price of 380 yuan of 1640 is much cheaper than the price of nearly 600 yuan of 1625. Therefore, in the case of not needing much light mapping technology, it is better to choose benqdw1640.

Of course, if you are a fashionista, then it is not impossible to choose the 1625 with light engraving technology. Because we do find that the imprints made on the plate using the photomapping technique can be very meaningful! ~~

The photoengraving technique punches holes in the coating, reflecting the grayscale by the density of the holes.

The principle is: the physical structure of the light engraving recorder has one more light head than the general *** recorder products, which is specially used for positioning.

Optical positioner".

It is used to ensure accurate positioning when engraving patterns.

The nero software included in the light engraving recorder can realize light engraving, this technology can only achieve monochrome engraving at present, we can see it in disguise as a gray level HP has successfully developed color light engraving.

1.The light engraving recorder can burn data like an ordinary burning disc, and can engrave the disc surface pattern 2Light engraving recorder can be like an ordinary optical drive,Read the disk and**,At the same time, he is also a carving tool3.

The light engraving recorder is related to the printer in the burning and coloring problem, and the printer has monochrome and color, so the engraved pattern is gray and color4Angel and Pioneer light engraving recorders are good, with average speed and good stability

The success rate is high5, and the average light engraving recorder parameter is 18x

+ -r write: *** disk points plus or minus, write is to burn 8x*** + r

DL write: DL write is to support burning *** disk, the maximum speed is 8x8x***-r

DL writes: Same as above.

8x***+rw overwrite: rw overwrite is re-readable and written, and you can erase 6x***-rw overwrite after writing: Same as above.

12x***-ram: It should be a readable ram disk, not very clear. I don't think I can meet it.

Photo-engraving technology is a technology that uses laser engraving to coat a special material on the disc to change its color, so that the burning user can easily create a fashionable and personalized disc pattern for the burned disc.

He mainly adds ** to the top side of the disc to beautify the disc, which is different from an ordinary recorder that burns data.

It doesn't affect the notebook recorder to complete the mapping function, but you need to install burning software.

If the optical drive is removable, it's no problem, if it's broken, buy another one and install it

It can be said that photoengraving technology is a complex and novel technology, it integrates printing, imaging and computer technology, because today's photoengraving technology uses the 780nm laser used to burn CD to punch the dye layer, which also puts forward certain requirements for the CD work-related components of the bald head, and the time for users to burn a label with photoengraving equipment is about 20 minutes, which is slower than ordinary burning, so there are only some mainstream storage device manufacturers today. Moreover, this technology can only achieve monochrome engraving today, which can be seen as a grayscale level in disguise.

When Lightscribe previews the color**, it will also automatically convert it to a grayscale image.

Photoengsing technology is simply to use what you are satisfied with** as a disc cover.

The light engraving recorder is very expensive when it comes to the town of Zaozhi, and the key is that the light engraving recorder is expensive and slippery.

We tend to use a marker pen or sticker to mark the contents of the burner, but over time, the handwriting on the disc may be blurry, and the weight of the label may affect the reading quality when the disc is running at high speed. With photoengraving technology, any user can DIY their own disc cover label, which is as accurate as screen printing and timeless, so that you will be reminded of the story behind it as soon as you see it. From this point of view, the value of light mapping technology is not only to make the style of the burning disc uniform and easy to organize, but also to make the cold IT products more personalized.