In addition to soaking cars and accident cars? What are the pitfalls of used cars?

Now many friends have turned their attention to the "cost-effective" second-hand cars, especially for some friends who do not have enough budget to buy a car, they will choose to buy a second-hand car to "practice their hands", and when they have the money to buy a new car, they will eliminate the less valuable second-hand cars, anyway, it didn't cost much, and they won't feel distressed. However, as we all know, there are many "pits" in the second-hand car market and the water is also very deep, and if you are not careful, you may fall into these "deep pits" hidden under the water, and you may not even have time to regret it. There are also many old drivers who remind friends who buy second-hand cars that they must guard against "accident cars" and "soaked cars", even if these two types of second-hand cars are cheaper, it is not recommended to buy, because the parts and components in their cars may have a high risk.

Many people do focus on guarding against these two kinds of cars when buying second-hand cars, but in addition to these two, there is another second-hand car that everyone needs to be careful about, that is, second-hand cars that are "converted from business to non-business"!

So how can you avoid buying a second-hand car that is "business to non-business"? In fact, its identification method is much simpler than the accident car and the soaking car, as long as you look at its driving license can be clear, will be clearly marked "business to non". If you really think it's very cheap, and you want to buy it knowing that it is a "business to non-business", then you must see clearly that it still has a few years of "life", because this kind of car only has an 8-year life, and it will be forced to scrap when it expires, for example, it has been driven for 6 years before, which means that it can only be driven for two years after buying, and there is no need to buy this kind of car even if it is cheap.

1.First of all, it is common to conceal the condition of the car, which can be avoided by third-party vehicle detection, so don't be afraid of trouble.

2.The identity of the vehicle is easier to hide than the condition of the vehicle. For example, incomplete information, mortgage status, violations, etc. It's easy not to cooperate with the processing in the later stage.

3.Transaction fees are not clear, such as licensing fees, loan interest, service fees, etc., which are not clear, or vague and general. When signing a contract, be sure to write it down clearly.

4.Emission standard issues. This is actually a part of the car condition, but it is relatively unpopular, but it is more stringent in some areas, but the residual value of models with different emission standards is also different.

5.No formal contracts. All verbal promises are paper tigers, and only those who write clearly in black and white, and who have a seal and a signature, are good comrades.

6.Contracts, chapter issues. This is a supplement to the previous one, and the situation is more extreme. As much as possible, choose to trade with the car dealer to whom the vehicle actually belongs, and minimize the middleman in the transaction process, which can basically be avoided.

Many people do focus on guarding against these two kinds of cars when buying second-hand cars, but in addition to these two, there is another second-hand car that everyone needs to be careful about, that is, second-hand cars that are "converted from business to non-business"!

There are also many faults, cars that love to be bad, and there are many faulty cars.

How do you know the real condition of a used car? After reading it, I no longer worry about buying an accident car and a soaking car.

Generally, after the soaking car is immersed in water, it will be traced under the seat, and it should be seen by observing it yourself, and the front body cover should be opened to see if the position of the engine bracket and the water tank has changed to distinguish the accident car.

The accident car generally conducts a comprehensive appraisal of whether the paint, sheet metal, and screws are disassembled, deformed, or displaced, the damage to the ABC column, and the trunk inside and outside the car.

The soaking car can generally be smelled (even if the soaking car is cleaned clean, it will produce a musty smell), see (there is rust in the car, and some sediment will remain in the gaps), touch (most of the car seats are made of foam sponge material, and the material will be hard after entering the water), and test (whether the center console is abnormal, and the LCD screen is different in light and dark).

If you are not at ease, you can come to Guangdong Mingjian Judicial Appraisal Center, we have an authoritative automobile testing center, I hope to help you.

Buying a second-hand car, how to distinguish an accident car from a soaked car? The old driver teaches you experience, which is very practical!

The identification of the soaking car is generally through the chassis of the car, as well as whether the seat bracket of the car is rusty, and then whether there are traces of water stains on the buckle of the seat belt of the car, and then the rear trunk of the car and other positions can be seen.

Then this has to read countless cars, simply put, the accident car first open the hatch cover, see if the glue around the engine compartment is intact, whether there are sheet metal traces on the edge, whether the paint surface is smooth and flat, whether there are small pits with explosion bubbles, and whether the paint color is consistent from the side of the car body under strong light, the soaking car is even more to drive more cars with old age, and the subtle feeling of the same type of car soaking water is not the same from starting to pulling the speed, this can not be very specific, However, it is common to have unstable idling speed or abnormal engine noise.

Inspection Method:

1 Open the hood to see if there is sludge left in the water tank, air conditioner radiator, and front panel of the water tank (see from below).

2 Check the small parts next to the engine, the charging motor, the starting motor, the wire socket, and the sludge at the joints of the left and right wheel turtles.

3. The front and rear seat seats (upside down) are checked for the residual sludge and musty smell of the spring and the brown cloth on the inner cover.

4. Check the residual sludge in the dead corners of the rear wheel turtles on both sides of the rear trunk seat (spare tire seat).

5 Residual sludge from the structure, wires, and socket joints in the dashboard base.

6. There is an obvious line of sludge in the middle pillar of the front and rear doors (covered by a plastic trim plate), indicating the height of the car's soaking (it is not easy to clean because there are too many dead corner joints in the pillar).

7. Dig up the front and rear windshield erasers (from the inside of the car) with a screwdriver, and if there is sludge inside, it is a fully soaked car, and the water level exceeds the hood of the hood to be considered a fully soaked car (extinguished).

It can be seen in the following ways:

1. Double Record:To a large extent, the vehicle is repaired and maintained in the 4S shop, so you can clearly check the maintenance and accident records, understand how the actual use of the car is, and ordinary consumers who do not have the skills to identify second-hand cars can I have a car treasure to check the car condition record, interpret the car condition in detail, and say goodbye to soaking cars, accident cars, and problem cars.

2. Engine compartment:Whether the engine compartment is dirty, whether there are sediment-like stains attached to the water tank, air conditioner radiator, and small lenses for the front panel of the engine compartment (from the bottom up). Also pay attention to the small parts next to the engine, the generator, the starter motor, the power socket, the seams of the left and right wheel rails.

If it has been blistered, it is also important that the engine may look newer (because it has been cleaned).

3. Engine support frame:The nuts of the engine support frame were screwed because the engine had to be removed for repairs.

4. Engine body:The nuts on the engine block are all screwed for rust marks as the engine is to be overhauled (as is also used for other engine breakdowns).

5. Center console:Looking from the front legroom into the center console, the wiring and other parts inside are covered with muddy stains.

6. Engine sound:The engine is relatively loud and the idle speed is not smooth.

Buying a second-hand car, how to distinguish an accident car from a soaked car? The old driver teaches you experience, which is very practical!

Should I inspect when buying a used car**? The old driver teaches you to distinguish the accident car soaked in water, and you are not afraid of pitfalls when you buy a car.

It is recommended to find a master who understands cars, and Xiaobai will definitely not see the problem.

There is a certain risk of short circuit after the inside of the soaking truck, and there are hidden dangers such as sluggishness and failure of the braking system in terms of hardware. Whether there are rust and water stains under the connecting rods of the brake plate and accelerator plate and the slide rail of the seat are the two criteria for judging whether it is a soaked car. In addition, within three to five years, there will be varying degrees of musty smell in the car of the soaking truck.

Generally speaking, it is not recommended to buy and sell soaking cars, but to be honest, there are indeed a lot of soaking cars on the market now. It is recommended to go to the Runhua second-hand car market when buying a car, on the one hand, the possibility of selling soaking cars in this regular market is very small, on the other hand, they have a strict car inspection process, and they are very responsible for the condition of the second-hand car, which makes consumers feel more at ease.

The body is rusted, the wiring harness is rusted, the smell in the car is very strong, and the possibility of spontaneous combustion in the later stage is greater.

Mainly automotive instruments, electronic relays, driving computer electronics are prone to problems, and generally large parts such as engines, gearboxes, differential bodies, etc. should have no hidden dangers.

First, the identification of the interior:

When you get on the bus, smell the smell first. In general, car interiors soaked in water will still have a musty smell after washing. Some cars will spray perfume inside the car to mask the musty smell. You should also be vigilant if the smell is too strong.

Then, take a look at the metal bracket at the bottom of the seat. If there is visible rust on the bracket and screws, you can basically conclude that the place is blistered. Due to the normal use of the car, the metal bracket at the bottom of the seat is difficult to come into contact with water.

Even if the car is washed and the interior trim is cleaned, it is difficult to clean here.

Next, take a look at the seat cushions and seat belts. The inside of the mat is usually foamed sea. After soaking, the elasticity will become very poor and it will feel very hard.

We can press and pinch the edge of the mat with a lot of force, and then we can feel it. When a harness is soaked in water, it leaves visible water marks that can easily develop mold spots.

Second, look at the chassis.

The main way to identify a soaking car is to look at the rust on the chassis. The chassis is generally coated with anti-rust paint, which can protect the rain that splashes during our daily driving. However, if the chassis is soaked in water for more than 5 hours, the anti-rust coating will be damaged, resulting in rust.

It is normal for the exhaust pipe to rust or turn red slightly after prolonged use and rain erosion, but if there is a large area of rust, it must be soaked in water.

When buying a car, you should pay attention to:

1. Look at the color and gloss of the body to see if the body has color difference and unevenness. Generally, there will be color deviations or wavy paint on the surface of the car that has been repainted, but these are generally difficult to see when we look directly, so this should be obliquely viewed from a 30 to 45 degree angle.

2. Check the year label of the glass to see if it is consistent with the production year of the car itself.

3. Open the engine cover, check whether the gantry frame protecting the engine front has been replaced, see whether the front of the gantry is the original label, and then check whether the edge of the engine cover is flat, whether the touch feeling is soft, if you find that the rubber strip is uneven or the touch is soft, it should be repaired the engine cover.

The basic problems of the car have been solved, and in the end, the most important thing is the first problem that everyone is concerned about, which basically has no clear formula, and generally we have to refer to the vehicle brand image and driving conditions to evaluate. Therefore, it is recommended that the public who buy a car compare with similar models on the market, as the saying goes, "shop around", look more and choose more, which will also avoid **.

If you want to judge whether the car has an accident, you need to look at the paint surface of the body cover and the solder joints and paint surface of the body frame. The following is the specific introduction: 1. Key inspections:

If you want to judge whether the car has been blistered, you need to look at the carpet in the car, seat steering columns, screws, etc. It also needs to see if the electronic systems on the car have been replaced in a large area. If the car is blistered, it doesn't mean that the electronic system will be damaged, and the electronic system will be replaced.

2. Understand the accident car: To judge the accident car, everyone must understand what the accident car brother is round. If only the body cover has been scratched and collided, then the car is not dusty and belongs to the accident car.

If the body frame of the car is damaged, the car is considered an accident car. 3. Body frame: The body of the car is composed of the body frame and body covers.

Body coverings include front and rear bumpers, front doors, front fenders, engine covers, and trunk lids. After removing all the coverings, all that remains is the body frame. Since the roof and rear fenders are welded to the body frame, the roof and rear fenders are also part of the body frame.

There are paint and solder joints on the body frame of the car, and if the body frame is repaired, then the original solder joints and paint will be destroyed.

Click to talk about my avatar to see the introduction, and take you to understand the car condition query method! Professional query [accident record], [4S maintenance record], etc., the data is accurate, and the report is issued in seconds! One-click investigation of bad car conditions such as accident scattered old hall cars, soaking cars, meter adjustment cars, and fire cars!

The ** of the car is very high, and the car is not value-preserved, many people want to sell the car after just buying it, at this time the car will depreciate rapidly. Therefore, many people will choose to buy second-hand cars in order to save money, but there are many doorways in second-hand cars, and the water in this industry is very deep, because some second-hand cars are accident cars, after modification, and some people sell their soaking cars as second-hand cars after some modifications, which will bring some inconvenience to many second-hand car owners. What are the characteristics of an accident car?

Let's find out together.

Generally speaking, as long as the soaking car has the following characteristics, because the soaking car is soaked in water for a long time, so the front and rear lights of the soaking car are likely to have some abnormal situations, and there will be some yellow traces in the front and rear lights, and if it feels that the new and old obvious components of the front and rear lights of the car are not consistent with the year of the car, then special attention must be paid at this time. There are also some aspects of seat belts, because if you soak in water for a long time, the seat belt of the car is likely to be soaked, especially in the sewage, it will leave obvious water marks, which are very difficult to remove.

The distinction of the accident car is also relatively simple, because the accident car is mainly that there may be an abnormality of the engine, you can open the engine cover to observe, if the engine has some abnormalities, then it is likely to be the accident car, and there are some reasons to check the seat and center console of the car, etc., these are checked, if there is no problem, then the car is very likely, it is a better second-hand car.

In general, if you buy a very bad second-hand car, it will make the owner feel very troubled, so when buying a second-hand car, you should check carefully, and seriously distinguish whether it is a soaking car and an accident car, if it is a soaking car and an accident car, then don't buy it.