How to choose a toilet, how to choose a toilet, toilet selection skills

Users are never experts, and it is never wrong to buy a truly well-known brand.

If I choose a toilet, first I determine how much I want to spend, then choose one among the well-known brands, and then choose one that looks okay.

I'm a function-first person who cares little about aesthetics and only about practicality.

1.Chongqing New Kanglijia, Chongqing Siwei, Wrigley (mid-range, ** about 500-1000).

2.American Standard, Kohler, TOTO (mid-range upper, ** about 1000-3000).

3.Duravit (high-end, ** about 5000-20000).

As for splash resistance, refer to the one I gave to another friend.

The national standard for toilets has detailed requirements for flushing water, noise, and water seal area.

In fact, the splashing water you are talking about is mainly related to the area of the water seal and the depth of the water seal. The water seal area is large, and the water seal is deep and the odor is not easy to return, but the water seal is deep, and it may splash water.

The direct flush type and the siphon type are just different flushing methods, which are equivalent to a Wudang faction and a Shaolin faction, and there is no distinction between superior and inferior. As long as it is produced by a regular manufacturer, it is not easy to splash water. As long as the products produced by small manufacturers do not meet the national standard, there may be problems.

Toilets are used frequently, use a lot of water, and are troublesome to clean up, so it is recommended that you spend a little more money and buy a good one. Don't look at the basics below 500, the project price can be bought, ** basically no play, unless you buy a sample.

If you want to buy 500-1000 yuan, we recommend Siwei, Wrigley, and Huida.

If you want to buy more than 1,000 yuan, we recommend American Standard, Kohler, and TOTO.

Toilets have to look at three aspects.

1.Ceramic glaze.

2.Water tank water parts.

3.Offal.

Nowadays, the general brand of toilet is splash-proof.

First, when choosing a toilet, you need to consider the total weight of the toilet, generally speaking, the higher the total weight, the better the quality, this is because the total weight is high, the production density of the toilet is larger, and the quality is better.

Second, the bottom of the toilet is for drainage, different models may have the number of sewage holes are not the same, but when the number of sewage holes is too much, the impulse will also be affected, when you choose, you should first look at how many sewage outlets are decorated in your bathroom.

Third, the glaze of the toilet also needs to be checked, the glazed area of the toilet is still relatively large, and the glaze of good quality looks very smooth and clean, and it will not feel rough to the touch.

Fourth, the caliber of the toilet should also be paid attention to, generally the caliber we choose can put down a palm, so that the speed of sewage discharge, and the high accompaniment and not easy to leave dirty marks.

Fifth, the water tank of the toilet should also be considered, the water tank should be selected with a certain height, so that a certain amount of impulse can be guaranteed, and the impulse of the water tank is generally insufficient.

1. Distinguish between a conjoined and a split toilet.

Siamese toilet: Simply put, the toilet tank and toilet are connected together, this kind of conjoined toilet is relatively simple to install, and there will be no seams, easy to clean.

Split toilet: The water tank and the base are separated, and the toilet needs to be connected with the water tank with bolts when installing.

Although some toilets are also said to be conjoined, but in fact, they are fired separately, and the last process is spliced together and then glazed, this can be touched by hand, if the side is smooth and non-concave, it is one-piece firing, and if there is a concave and convex joint, it is separated.

2. Distinguish between a clear row or a wall toilet.

When buying a toilet, it is necessary to distinguish whether it is a floor toilet or a wall toilet, this is very critical, the meaning of the wall row, the water is to the wall pipe, the ground is to the ground pipe, if the toilet drainage method is different, it may lead to your home can not be installed, then it will be very troublesome to return.

3. Distinguish the quality of water parts.

The core part of the toilet is the water piece, so when buying a toilet, it is also recommended to open the toilet lid to see what brand of water is inside, preferably the water part produced by a well-known brand, and you can also press it with your hand to see if it is smooth.

Look at the pros and cons of the toilet

1. Water consumption. Old-fashioned siphon toilets require a lot of water to ensure that they flush cleanly, which is more water-intensive than flush toilets. However, after the improvement of the curve, the current siphon toilet and the flush toilet use about the same amount of water, but slightly more than the latter.

Second, the intensity of washing. Due to the use of the gravitational potential energy of water and its special steep structure, under the same water consumption, the flushing power of the in-line toilet is greater, while the performance of the siphon toilet will be a little inferior. At the same time, the amount of scouring force will also affect the cleanliness of the scouring surface.

The inner wall of the toilet bowl will be contaminated with some filth, and the cleaning effect of the in-line toilet will be better.

3. Flushing noise. No toilet flushes silently. However, in contrast, the flushing process of a direct-flush toilet is simple and rough, and the sound will be louder, while the siphon toilet will make less noise by using the difference between pressure and liquid level.

Floor-standing toilets:

1. The floor toilet is generally quite simple to install, and the cost is low, even if there is a problem with the drainage pipe and other parts in the later stage, it is relatively simple and convenient to maintain. However, during the installation process, it is necessary to ensure that the flange and the sewage outlet are well sealed, and at the same time, the ground interface must be glued.

2. The floor toilet occupies a large area when it is installed, and it needs to be reasonably planned and marked according to the available space of the bathroom before installation, so as to prevent the toilet from being unable to get down or open the door to touch the toilet after installation.

3. The floor-standing toilet is in contact with the ground, and it is very inconvenient to clean, even if it will be sealed with glass glue during installation, but during long-term use, the glass glue is easy to age and fall off, moldy and black, and there will often be peculiar smells emitted from the bottom of the toilet. So if you plan to install a floor-standing toilet at home, be sure to clean the edge of the toilet regularly and change the glue, especially in the summer.

4. Floor-mounted toilets generally include: back, side and lower rows, so when choosing a floor-standing toilet, it is necessary to determine the layout of the drainage pipes in the bathroom, and try to make the water pipe docking and installation convenient.

1. Observe the gloss of the toilet.

The higher the gloss of the product, the higher the density, the easier it is to clean and hygienic. This is because the quality of porcelain is directly related to the life of the toilet, the higher the firing temperature and the more uniform, the better the porcelain.

2. See if the glaze is uniform.

Consumers can ask the store whether the sewage outlet is glazed, and even put their hand into the sewage outlet to feel whether there is glaze in the return inlet. The main culprit of hanging stains is the poor glaze, customers can touch it with their hands, and the qualified glaze must be delicate to the touch. Consumers can be picky and touch the corners of the glaze (yin and yang), if the glaze is very thin, it will be uneven in the corners, the bottom will be exposed, and it will be very rough to the touch.

3. The flushing method of the toilet.

The cleanliness of a toilet is directly related to the way it is flushed. At present, there are two main flushing methods of domestic toilets, direct flush type and siphon type. The flush toilet uses its own gravity to flush the water during flushing to press out the dirt from the toilet trap to achieve sewage discharge, which has the advantage of strong sewage discharge capacity; The siphon toilet uses the siphon force generated in the toilet sewage pipe when flushing to suck the dirt out of the toilet trap to achieve the purpose of sewage discharge, the advantage is to avoid splashing water when flushing, and the cylinder flushing effect is cleaner.

4. The water consumption of the toilet.

There are two ways to save water, one is to save water consumption, and the other is to save water through wastewater reuse. Water-saving toilet and ordinary toilet function is the same, must have both water-saving, maintain the function of washing and conveying excrement, the current market with water-saving slogan but product technology and actual effect is not satisfactory products are not a few, purchase need to pay extra attention.

5. Test water-saving performance.

Many products on the market claim to use a 6-liter water-saving design, but in fact, it is difficult for ordinary consumers to discern the actual effect, so it is recommended to buy well-known brand products. The glazed surface of the toilet should be smooth, flat, without ripples, crystal color, and without needle eyes or impurities. Because the flatness of the pool wall directly affects the cleanliness of the toilet, the smoother and more delicate the pool wall, the less likely it is to get dirty; The pipes should be relatively smooth, otherwise it will affect the sewage discharge, which is often not possible with counterfeit products.

Medium size, large flush volume, odor resistant, wear-resistant.

First of all, it is necessary to choose a dense toilet, which is not seepage and smelly.

Optional big white bathroom, AI voice control, simple and atmospheric appearance, super intelligent one, cost-effective.

Step 1: Weigh the weight.

Generally speaking, the heavier the toilet, the better, the average toilet weight is around 25 kg, while a good toilet is about 50 kg. Heavy weight toilets have high density, solid materials, and good quality. If you don't have the ability to pick up the entire toilet bowl and weigh it, you might as well lift the lid to weigh it, as the weight of the lid is often proportional to the weight of the toilet.

Step 2: Calculate the capacity.

For the same flushing effect, of course, the less water used, the better. Bring an empty mineral water bottle, close the toilet inlet faucet, after draining the water in the water tank, open the water tank lid and use the mineral water bottle to manually fill the water tank, according to the capacity of the mineral water bottle, roughly calculate, how much water is added after the water inlet valve in the faucet is completely closed? Check whether this water consumption matches the water consumption labeled on the toilet.

Step 3: Test the water tank.

In general, the higher the height of the tank, the better the impulse. In addition, the flush toilet tank needs to be inspected for leakage. You can drip blue ink into the toilet tank, stir well and see if there is blue water flowing out of the toilet outlet, if so, it means that there is a leak in the toilet.

Step 4: Consider the water parts.

The quality of water parts directly affects the flushing effect and determines the service life of the toilet. When purchasing, you can press the button to listen to the sound, and it is best to make a crisp sound. In addition, it is necessary to observe the size of the outlet valve in the water tank, the larger the valve, the better the water discharge effect, and the diameter of more than 7 cm is better.

Step 5: Touch the glaze.

The toilet bowl has a smooth glaze, a smooth and smooth appearance, and a soft color. We should use the original reflective to observe the glaze of the toilet, and the unsmooth glaze is easy to show under the light. After inspecting the glaze of the outer surface, you should also touch the drain of the toilet, if the drain is rough, it is easy to trap the dirt.

Step 6: Measure the caliber.

If the diameter of the sewage pipe and the inner surface is glazed, it is not easy to hang dirty, and the sewage discharge is rapid and powerful, which effectively prevents blockage. If you don't have a ruler, you can put your whole hand into the toilet mouth, and the more freely you can get in and out, the better.

Step 7: Flush method.

Toilet flushing methods are divided into direct flush type, rotary siphon type, vortex siphon type, and jet siphon type; The water pressing method can be divided into flush down type, siphon flush down type and siphon whirlpool type. The flush down type and the siphon flush type have strong sewage discharge capacity, but the sound is loud when flushing; The whirlpool type consumes a lot of water at one time, but has a good silent effect; The direct-flush siphon toilet has the advantages of both direct flushing and siphoning, which can not only quickly flush dirt, but also play a role in saving water.

Step 8: On-site test imprint.

Many sanitary ware sales points have on-site trial devices, and it is most straightforward to try the flush directly.

1. Observe whether the glaze of the toilet is smooth, consistent in color, and there can be no cracks and burrs; Then gently tap the toilet bowl with your hand, the high-quality toilet will make a crisp sound, if the sound is dull, it is not recommended to buy. When purchasing, also pay attention to whether the merchant provides trademarks, warranty cards, certificates of conformity, and so on.

2. The flushing method of the direct-flush toilet is relatively simple and rude, and it is not easy to cause toilet blockage or backwater in the later use. You can also reach into the sewer pipe with your hand to see if there is glaze, if not glazed, the later use is likely not to play the role of anti-odor, we can not only listen to the words of the merchant when purchasing.

4. The position of the toilet water storage is called the water seal, according to the relevant regulations, the height of the water seal is 50mm, and the toilet seal of some high-end brands is generally about 55-60mm, so you need to observe it carefully when you buy.

5. The siphon toilet has a good sales volume on the market, but due to its high pipe direction, it is more wastewater when flushing, generally about 8-9 liters. Therefore, it is key to choose a water-saving toilet as much as possible, and the amount of water will not exceed 6 liters in one flush.

Choose ergonomic, regular manufacturers, the texture of the first level of magnetic is the best, not easy to stick dirt, pumping parts to choose hard links, so that the use of long-term. The main thing is to do it comfortably. Try it at the store and sit on it.