How to quickly ventilate and cool down the workshop of the furniture factory

Some workshops in furniture factories are dusty.

It's really hot.

You can consider using environmentally friendly air conditioners for ventilation and cooling.

Industrial ceiling fans can also be considered to cool down.

Negative pressure fan + environmental protection air conditioner can be installed, negative pressure fan can quickly extract high heat, harmful gases, dust and smoke, etc., environmental protection air conditioning has the function of ventilation, can be outdoor fresh air through environmental protection air conditioning filtering and cooling and continuously sent to the room, while the indoor dirty air is discharged, keep the indoor air fresh environment. Negative pressure fans and environmentally friendly air conditioners also have the advantages of rapid cooling, low investment costs, energy saving and power saving, and large coverage area. It can help you solve the problems of ventilation and cooling in the furniture factory.

Steel structure workshop because of its fast construction speed, cheap construction cost, good firmness and other advantages, is widely used by many modern industrial enterprises, in the scorching summer heat, dense steel structure workshop work, to solve the high temperature and stuffiness of the steel structure workshop, to cool the indoor air environment is a very important problem, so how to cool down the steel structure workshop?

The first method is to install roof ventilation balls for ventilation and cooling

Roof ventilation ball is a kind of ventilation equipment that does not need electricity by relying on the principle of air convection for ventilation, relying on the natural wind blowing in the high air on the roof of the factory to produce a certain amount of exhaust air and carry out ventilation, when the indoor and outdoor air environment is different, it will produce air flow, so as to eliminate indoor exhaust gas and hot gas. The advantage is that it does not require additional electricity and is more environmentally friendly. However, it is more dependent on the environment and cannot be forced to exhaust.

The second method is to install environmentally friendly air conditioners

If you want to make the air temperature in the steel structure workshop lower, and the cooling effect is more significant, you can install Yueneng environmental protection air conditioning to send cold air into the plant under positive pressure, forcing the air and cold air in the plant to neutralize and cool, improve the speed of air overflow outside the plant, and force air flow ventilation.

The third method, install a negative pressure fan and a cooling pad:

When the negative pressure fan works normally, with the help of strong exhaust suction, the air stagnant and gathered in the plant is quickly pumped out of the workshop through the exhaust outlet, resulting in the forced flow of air in the workshop. When the negative pressure fan and the cooling wet curtain are working, the negative pressure fan quickly extracts the high temperature and stuffy air in the plant to form a negative pressure in the plant, so that the outdoor air absorbs heat through the cooling wet curtain to reduce the air temperature and send it into the plant to cool the ambient air.

Negative pressure fans are installed on the walls and windows to force a large number of high temperature and stuffy air gathered inside the workshop to the outside of the workshop, and the workshop forms a negative pressure situation to force the air outside the workshop to pour into the workshop for convection ventilation to reduce the high temperature and stuffiness of the workshop. Improve the speed of ventilation in the workshop, this method is suitable for poor ventilation, high temperature, stuffy workshop.

On the side window of the original negative pressure fan workshop, the cooling water curtain system is installed, and the air is forced to cool down by the negative pressure fan after the temperature becomes low, and the cooling water curtain and the negative pressure fan are used together to cool down.

The outdoor air is fully in contact with the water after the wet curtain absorbs the sensible heat of the air at the same time, so as to achieve the purpose of cooling, ventilation, dust removal, increasing the oxygen content of the air, and purifying the air.

Hello dear, the workshop cooling and ventilation liberation program has the following types: 1Install high-power fans to enhance ventilation effect; 2.

Install ventilation ducts to direct outdoor air into the workshop; 3.Install convection ventilation equipment on the top of the workshop to promote air flow; 4.Install heatstroke prevention and cooling equipment, such as air coolers, spray equipment, etc.; 5.

Control the flow of people on the shop floor and reduce heat release; Stupid Hood Oak 6Adjust the workshop lighting system to reduce the heat generated by the lighting equipment; 7.Use heat materials on the walls and roofs of the workshop to slow down heat transfer; 8.

Conduct regular cleaning to ensure that ventilation equipment and ducts are clear; 9.Strengthen the occupational safety education of employees, and guide employees to scientifically escape the heat and cool down.

Hello, workshop cooling and ventilation solutions Cooling and ventilation solutions mainly include the following aspects: 1. Purchase and install wax cavity air conditioning system. According to the actual situation of the workshop, the appropriate air-conditioning system can be selected and installed in a suitable position to achieve the best temperature effect of reducing the wheel and the shirt temperature.

2. Install a ventilation system. A ventilation system can be installed to bring in fresh air for cooling purposes. 3. Install the lighting system.

Lighting systems should be installed to shorten the light time in the workshop and reduce the temperature in the workshop. Fourth, open windows for ventilation. When the temperature outside the workshop is lower than that in the workshop, the window can be opened for ventilation to let fresh air enter the workshop, so that the brightness of the workshop temperature is reduced.

5. Plant greening. Plants can be planted near the workshop to reduce the heat in the workshop and thus the temperature of the workshop.

Workshop cooling and ventilation solutions:

1. Negative pressure fan.

The main feature is high air volume and low energy consumption, which is generally installed on walls, windows, or roofs. The characteristics of the large air volume of the negative pressure fan can quickly discharge the stuffy air in the workshop to the outside, so as to form a negative pressure state, and achieve the circulation mode of hot air out and natural air in, which can make the workshop play the purpose of ventilation.

2. Environmental protection air conditioning.

The principle of environmental protection air conditioning ventilation and cooling scheme is a physical phenomenon, the water flow through the built-in water curtain of the host, increase the area of water to speed up the evaporation of water, when the fan will suck the outside air through the water curtain paper, it will take away a lot of heat after cooling and cooling to form a cool and comfortable fresh air.

Environmental air conditioners have different names in different places, including water-cooled air conditioners, industrial air coolers, etc. When the fresh air of the environmental protection air conditioner enters the factory, it can not only reduce the ambient temperature, but also improve the air quality and increase the oxygen content. The daily electricity bill of using the environmentally friendly air conditioning ventilation and cooling solution is only 1 kWh per hour per 100 square meters, which is more economical than that of traditional air conditioners.

3. Industrial fan.

Now there are large air volume and ultra-low speed industrial fans on the market, with power consumption, and at the same time have a large fan covering an area of 1800 1 units.

However, this is also a solution for physical cooling, because the air flow driven by large air volume accelerates the evaporation of human sweat, so for large plant areas, enterprises that want to save costs are the best choice.

The negative pressure fan for cooling and ventilation in the workshop extracts high temperature and stuffy air to cool down. Yueneng negative pressure fan is installed on the wall window of the workshop, which forcibly discharges a large number of high-temperature and stuffy air gathered in the workshop to the outside of the workshop, so that the negative pressure situation is formed in the workshop, and the air outside the workshop is forced to pour into the workshop for convection ventilation, so as to reduce the content of high-temperature sultry air in the workshop, and improve the speed of air circulation in the workshop.

The cooling water curtain system for the cooling and ventilation of the workshop refrigerates the air outside the workshop and enters the workshop for secondary cooling. The workshop installs the negative pressure fan on the opposite side or the side wall window of the Yueneng cooling water curtain system, and the supplementary air entering the workshop is cooled by the cooling water curtain for the second time, and the air with lower temperature is forcibly introduced into the workshop to cool down, this method is used with the negative pressure fan to cool down the best effect, it should be noted that the amount and speed of the air in the water curtain cooling system should be enough to supplement the amount and speed of the high temperature and stuffy air discharge in the workshop, and the sealing of the workshop should be done. Try to ensure that the air entering the workshop passes through the cooling water curtain system.

The environmental protection air conditioner for cooling and ventilation in the workshop cools the air outside the workshop and sends it to the workshop for cooling.

The outer wall of the workshop is equipped with environmental protection air conditioning, which is to supply air to the workshop through the fan, and the fresh air outside flows through the wet curtain soaked in water, and the air is in full contact with the water while absorbing the sensible heat in the air focus, so as to achieve the purpose of cooling, ventilation, dust removal, and increasing the oxygen content of the air in the workshop, this scheme is especially suitable for high temperature and crowded places.

If there is no humidity requirement, the environmental air conditioner air cooler is the most ideal, if there are special requirements for humidity, then the use of fresh air units can also meet the cooling of the workshop, but I see the question you asked, directly with a certain brand of products, you should be a dealer of this brand and the like, belonging to Wang Po selling melons and boasting.