Can wolfberry be pruned and planted Can wolfberry branches be cut alive

Yes, I have planted one before, and it is best to cut it in the spring to make it easy to survive.

Goji cuttings are easy to feed, just too slow

Yes, wolfberries are so solid that they are relatively easy to survive.

As long as the wolfberry branch is reasonable cuttings scientific maintenance can survive, the best time for wolfberry branch cuttings is to choose spring, suitable temperature and humidity environment will increase the probability of branch survival, choose humus and vermiculite prepared soil quality, and then the wolfberry branch cuttings can be put into the culture soil, watering and soaking the shade and maintenance.

Goji berries are often used to sow seeds if they are divided for propagation, and rarely use cuttings, so can wolfberry branches be inserted to live, wolfberry branches can survive as long as they are properly cutting, and there is also a chance of wolfberry branches rooting and surviving in life, the best time to choose is in spring and autumn, and the moist growth environment will increase the probability of survival.

1. Cut off the branches

Goji berry cuttings need to choose branches that have grown for more than 2 years, the length can be controlled by about 10 cm, the bud points on the branches should be full, and the branches should also grow well, and then they will be placed in the rooting water for about a day to increase the chance of rooting.

2. Substrate preparation

Goji berry branch cuttings also need to prepare a suitable substrate, you can choose more nutrients humus for cuttings, and add some vermiculite to increase the drainage capacity of the soil, in the later breeding process will also reduce the phenomenon of water accumulation, after the substrate preparation needs to be disinfected, reduce the generation of diseases.

3. Cuttings process

Before cuttings, you can dig a small hole in the soil, and then place the wolfberry branches in the hole, cover the soil, until you fill it, the depth of the cuttings is between 3 5 cm at the same time, so that it is more beneficial for the rooting of wolfberry branches, and after the cuttings are completed, you can water it and soak it, and place it in a cool environment to maintain.

1.Preface.

Goji berry is a common Chinese herb and a common fruit tree. The growth rate of wolfberry trees is relatively fast, and if not pruned and managed in time, it is easy to produce a large number of branches and branches, which affects the growth and quality of wolfberry. Therefore, pruning techniques are essential for the growth and reproduction of goji berries.

2.Pruning time.

The pruning time is very important, if the pruning time is not appropriate, it is easy to affect the growth and quality of wolfberry. Generally, the best time to prune a goji tree is in spring and autumn. Spring pruning can promote the metabolism and growth of goji berries, while autumn pruning can promote the maturation and hardening of timber.

3.Pruning method.

The pruning method is the key, and it is to be selected according to the growth and shape of the wolfberry tree. Before pruning, remove weeds and unwanted branches. Specific pruning methods include: limb chains.

1.Cut off excess branches and reduce the overlap of the goji berry tree so that it can better absorb sunlight and air.

2.Cut down excessively long branches, maintain the beauty of the shape of the wolfberry tree, and promote the growth and quality of wolfberry.

3.Large branches that are inclined to front and back or horizontally are selectively shortened to reduce the squeezing and friction of the branches and promote the growth of new shoots.

4.Below each spherical canopy, select 3-5 new shoots that are wide and outwardly branched, keep them long and prune, and cut off the other weak shoots.

4.Pruning tools.

Pruning tools are also very important, so use sharp, clean tools. Pruning tools include: flower shears, ladders, hand saws, pruning saws, etc. When using pruning tools, pay attention to the direction and force of force to avoid causing damage to the wolfberry tree.

5.Precautions after pruning.

After pruning, you also need to pay attention to the following:

1.Some lime powder can be applied to the wound to prevent bacterial infection.

2.The cut branches should be cleaned up in time to avoid the damage to the plants caused by the remaining branches.

3.In the following period, intensified watering, fertilization, and protection are required to promote the growth and recovery of goji berries.

6.Summary.

Pruning technology is a very important part of the growth and reproduction process of wolfberry trees, and the correct pruning method can not only ensure the growth and quality of wolfberry, but also make the shape of wolfberry trees more beautiful. I hope that through the introduction of this article, you can better understand the pruning technology of wolfberry trees.

The branches of wolfberry have thin bark and low water content, if pruned too early, the cut is easy to lose water and dry up, and it is not easy to heal. Therefore, pruning should be completed before the sap begins to flow, and the principle of early pruning of old and weak trees and late pruning of young and weak trees should be mastered. The main types of wolfberry trees are natural heart-shaped, natural semi-circular, and conical.

The first two are suitable for sparse plantations with row spacing meters, and the latter are suitable for dense plantations with 300 plants per 667 square meters. Here's how to trim it.

1. Thinning branches. First of all, it is necessary to prune dead branches, diseased branches, wounded branches, needle branches and traverse branches, and then thinn and prune the fruiting branches that are too dense. When thinning and pruning fruiting branches, first remove the missing branches, shaded branches, dorsal branches, and weak branches; Back to the dorsal upper branches, middle branches; If it is still dense, then thin the branches on both sides, and after pruning, the distance between the fruit branches is 5 6 cm, and they are all white branches with full growth and strong fruiting power.

Second, deal with the long branches.

The long branches that grow at the drooping place of the backbone branches should be kept as the extension branches of the backbone branches, and appropriately shortened to make the branch potential and extension direction stable; If there is space near the long branches, it should be appropriately shortened and cultivated into a fruiting branch group, so as to expand the crown and increase the fruiting area; Long branches that have no use value are cut off from the base.

3. Update the fruiting branch group.

The fruiting branches of wolfberry are mostly bent and drooping after 2 years of fruiting, and the fruiting ability is reduced. For this fruiting branch group, leave 3 5 cm stubs, after spring germination, select a healthy bud with the right growth direction and position, and cultivate a new fruiting branch group by topping.

Fourth, renew the cultivation of fruiting branches.

Due to the different varieties of wolfberry fruiting branches, some can bear two consecutive fruits, some can only bear one season of fruits, or only bear small and few fruits at the top. Weak-fruiting branches are characterized by grayish-brown branches with very short branches. This kind of fruit branch must be shortened and renewed in time.

Generally cut from the bend and drooping of the fruit branches, the thick short shears 1 2, the weak short shears 2 3, the too weak only leave 5 6 cm stubs, the degree of stubbing is rather light than heavy.

If they can all be inserted, why can't they be planted upside down?

When wolfberry cuttings, the branches are not allowed to have flowers or buds, or even fruits (if any, all are removed).

The length of the branches is between 8 and 15 cm, with a leaflet on the line, and the leaves should not be left too much.

The simplest is water cutting, immersing the lower part of the branch in water, using a dark bottle, emitting scattered light, ventilating the place, and waiting for a large number of branches to take root, you can transfer to the soil and transplant. Of course, you can also insert soil or sand to scatter light and ventilate to keep the soil moist.

Cuttings in March, I don't understand, I can teach you.

The whole plant renewal of wolfberry tree pruning: there are a few wolfberry trees where most or all of the main branches are damaged or drained by DAO, and cannot form a crown on the original branches. However, the base and root system of the main trunk of the wolfberry tree are still intact, and the age of the wolfberry tree is within the prime of life, and the vitality is still very strong, the strongest long branches can be selected at the base of the plant, a small tree can be re-cultivated, and the residual part of the original plant above the place where the long branches are selected is selected to be removed, and the whole plant is renewed.

Because the root system of the plant is intact and the number of roots is large, it is conducive to the growth of new plants, which is generally faster than the growth of annual wolfberry seedlings. According to the survey, the use of the main stem base germination of the long branch for the whole plant replacement, after one year of growth, the base diameter is thick centimeters, there are 30 side branches, the crown width formed is up to 75 cm, and the use of annual growth of good seedlings to replant, the base diameter is only centimeters, the side branches are only 3, failed to form a small crown. Compared with the two, the effect of replanting wolfberry trees with long branches is much better than that of seedlings.

Therefore, for wolfberry with damaged canopy and unrestored root system, it is of practical value to replace the whole plant by using the long branches at the base of the trunk.

Goji berries are very fragile, so you must be careful when cutting them, cut them from top to bottom, hehe.

In spring and autumn, select 1-2-year-old stout branches that have been lignified on an excellent single plant, cut cuttings about 10cm long, with 2-3 buds, and dip their ends in 300mg L of IBA solution for 20min (minutes) before cuttings, the cutting depth is about 1 3-1 2 of the cuttings, and the cuttings substrate is 2:1 vegetable garden soil and frog stone.

It is best to sterilize the substrate before cuttings, whether it is container seedlings or seedbed seedlings, the thickness of the substrate should be more than 10cm, so as to facilitate the rooting and sprouting of cuttings. After cuttings, water them sufficiently, cover them with nylon film, and after 2 weeks, the cuttings will begin to take root and sprout. The test found that the rooting rate of cuttings treated with rooting agent could reach 100%.

About 3 weeks after cuttings, the roots and new shoots of wolfberry have grown well and can be transplanted.

The most suitable period for the propagation of wolfberry cuttings is to carry out before the germination of the plants in spring, first select the plants with large and full fruits, and then cut the branches that have grown for a year, the diameter needs to be centimeters, and the length needs to be about 20 centimeters, soaked and dried. After that, cuttings are carried out. Finally, when cuttings, they should be inserted in a 20 cm deep trench, and the cuttings should be exposed by 1 cm of the soil surface.

Goji berries can also be cut like this, so simple, this pot has already grown buds.