Is CRV antifreeze plus Bluestar s antifreeze OK

Hello, yes, I hope mine can help you, if you don't understand something, you can continue to ask me! Have a great day! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, yes, it is important that the color is the same , I hope my answer can help you! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello Yes, try to add a color! The original Honda car is blue [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

If you have the same color, you can add the same color, if you don't have it, you can buy it, you can use the model plus no problem [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

As long as the color is the same, it's okay [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, yes, the most important thing is that the performance of freezing point antifreeze is good. I hope mine can help you, if you have any questions, please continue to consult, I wish you a happy life! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Honda's with antifreeze.

The Honda plus antifreeze injection mold port is located under the hood, starting the engine and the inside of the nacelle, the gearbox.

On the far left, the specific operation steps of Honda plus antifreeze are as follows:

1. Open the driver's door of the Honda.

2. Pull the hood switch on the Honda.

3. Lift the hood of the Honda's engine.

4. Slowly unscrew the lid of the small kettle of Honda's water tank and drain the internal high-pressure gas.

5. Fill the small kettle of Honda with cooling water to the max position to shoot and transport.

Honda's antifreeze, Honda's antifreeze injection port is located under the hood, inside the engine compartment, on the far left side of the gearbox, and the specific operation steps for Honda with antifreeze are as follows:

1. Open the driver's door of the Honda.

2. Pull the hood switch on the Honda.

3. Lift the hood of the Honda's engine.

4. Slowly unscrew the lid of the small kettle of Honda's water tank and drain the internal high-pressure gas.

5. Fill the small kettle of Honda with cooling water to the max position.

As long as it is a small car, use antifreeze and add it to the car water tank.

1. The use of antifreeze in the engine has the following protective effects:

1. It plays a role in anti-corrosion protection for the components of the cooling system.

2. Prevent scale and avoid reducing the heat dissipation effect of the radiator.

3. Ensure that the engine can work within the normal temperature range.

Therefore, the antifreeze of the engine must have the characteristics of anti-freezing, anti-boiling, anti-corrosion, waterproof and non-foaming, and is not affected by the season and region. Among them, freezing point and boiling point are the basic indicators of antifreeze.

Second, the apostille process:

1. Before completely replacing the antifreeze, it is necessary to do a comprehensive inspection to see if there are traces of leakage in each pipe and whether there are cracks, the key is to check the five-way water pipe, the five-way pipe is named because there are five interfaces connecting various parts, and the antifreeze is distributed to different parts of the car after flowing through the five-way pipe. If there is a leak of antifreeze in this section, the water pipe should be replaced or the connection should be re-fixed according to the situation.

2. Release the old liquid, and then clean the liquid channel with clean water. Clean water is added to the antifreeze refill tank, which is then filled with clean water to continuously flow through the engine cooling system, and then idling for 3 to 5 minutes to circulate the water. The water that starts to flow out of the pitcher is a little pink, and continue to pour in clean water until the water that comes out is clean.

Don't forget to remove the warm air water pipe and drain the water from the warm air tank.

3. After draining the water for about 1 hour, add new antifreeze through the water pipe of the water tank (radiator), which is the method to let the antifreeze flow into the water tank quickly. Then add another bucket of antifreeze to the antifreeze tank, add it until the antifreeze tank is almost full, and drive for about 10 minutes, at this time, the cooling system has removed part of the air, the liquid level has dropped, and then add the antifreeze to it, and fill the highest mark of the storage tank "maxt".

The antifreeze of the Honda car is added when the car leaves the factory, and it is generally not less, and the replacement time is 3 years or 100,000 kilometers first. The antifreeze added to the water tank is used to cool down the engine, and it is recommended that you do not move, especially if the car is hot.

If the antifreeze is lacking, the meter will display, then it must be added. Antifreeze is generally valid for 2-3 years, you can go to a regular repair shop or 4S shop to check whether the freezing point of antifreeze is normal.

Antifreeze is to be added, and the car is added when it leaves the factory, and it is generally changed once every 2 years.

Fill the water tank or add it directly to the compensation pot.

Dear Kiss It's a pleasure to serve you The new Honda CRV is equipped with anti-freeze Qihu positive liquid. The full name of Honda CRV antifreeze is antifreeze coolant, which means coolant with antifreeze function. Antifreeze prevents coolant from freezing and cracking radiators and engine blocks or covers when the coolant freezes when parking in the cold winter.

Many people think that antifreeze is only used in winter, but we want to correct this misconception, in fact, antifreeze is not only used in winter, it is used all year round. It is recommended that the owner replace it every 2 years or 40,000 kilometers. Replacement Method:

Step 1: Check first do a comprehensive inspection to see if there are cracks and leaks in the pipeline, focusing on the five-way pipe (named because there are five interfaces connecting various parts), antifreeze must flow through the five-way pipe and then distribute to different parts of the car to play a role. Step 2:

Wash the old antifreeze out, clean the liquid channel with clean water, add the water to the antifreeze replenishment tank, and then inject clean water into the tank, so that the clean water flows continuously through the engine cooling system, and then idle for 3 to 5 minutes, let the water circulate, the water that starts to flow out of the tank is a little pale pink, continue to inject clean water until the water that flows out is clean. Don't forget to remove the warm air water pipe, and clean the water in the warm air water tankStep 3: Change the antifreeze to make the antifreeze flow into the water tank quickly, put the water for about 1 hour, and then add the new antifreeze from the water pipe of the water tank (radiator), add another bucket of antifreeze to the antifreeze tank, add it until the antifreeze tank is almost full, and ignite the car for about 10 minutes, at this time, the cooling system has reduced the liquid level due to the exclusion of part of the air, and then add the antifreeze to it. As long as the liquid volume is between the highest (max) and the lowest (min).

Summary. Hello, happy to answer your <>

The old CRV plus antifreeze port is next to the glass filler. The antifreeze replacement cycle is 100,000 km, and the replacement capacity is 4L. The full name of coolant is antifreeze, which means antifreeze with antifreeze function.

When stopping during the cold winter months, the coolant prevents the antifreeze from freezing the radiator and freezing the engine block and cylinder head. The above is the location of the old CRV plus antifreeze port.

The old CRV has an antifreeze port.

Hello, in the end** is to add antifreeze.

Are you there. Hello, happy to answer your <>

The old CRV plus antifreeze port is next to the glass filler. The antifreeze replacement cycle is 100,000 kilometers, and the manuscript replacement capacity is 4L. The full name of coolant is antifreeze, which means antifreeze with antifreeze function.

During the cold winter months, the coolant prevents the antifreeze from freezing the radiator and freezing the engine block and head. The position of the old CRV and antifreeze port is on the brigade.

Look**Draw it for me.

Kiss, ** received oh, on the left.

Kiss, place on the left.

Kiss, take a look at the ** sent to you by the teacher.

Kiss <>

Expansion: Antifreeze has two qualities: low freezing point and high boiling point. Therefore, it can not only ensure the normal operation of the car cold cultivation hood system in winter, but also prevent the cooling water from boiling in summer, and avoid the situation of boiling the pot. Trousers are noisy.

Hello, the first step: check first do a comprehensive inspection to see if there are cracks and leaks in the pipeline, focus on checking the bottom pipe (named because there are five interfaces connecting various parts), antifreeze must flow through the bottom pipe and then distribute to different parts of the car to play a role. Step 2:

Clean the old anti-call freeze to release the frozen liquid, clean the liquid channel with clean water, add the water to the antifreeze next to the mu liquid replenishment tank, and then inject clean water into the tank, so that the water continues to flow through the engine cooling system, and then idle for 3 to 5 minutes, let the water circulate, the water that begins to flow out of the tank is a little light pink, continue to inject clean water until the water flowing out is clean. Don't forget to remove the warm air water pipe, put the water in the warm air water tank clean Step 3: Change the antifreeze to make the antifreeze flow into the water tank quickly, release the water for about 1 hour, and then add the new antifreeze from the water pipe of the water tank and the rest (radiator), add another bucket of antifreeze to the antifreeze tank, add until the antifreeze tank is almost full, and ignite the car for about 10 minutes, at this time, the cooling system has dropped due to the exclusion of part of the air, and then add the antifreeze. As long as the liquid volume is between the highest (max) and the lowest (min).

Step 1: Check.

Do a comprehensive inspection first to see if there are cracks and leaks in the pipeline, focusing on the five-way pipe (named because there are five interfaces connecting various parts), antifreeze must flow through the five-way pipe and then distribute it to different parts of the car to play a role.

Step 2: Cleaning.

Release the old antifreeze, clean the liquid channel with clean water, add the water to the antifreeze refill tank, and then fill the tank with clean water, so that the water flows continuously through the engine cooling system, and then idle for 3 to 5 minutes, let the water circulate, the water that begins to flow out of the tank is a little light pink, continue to inject clean water, until the water flowing out is empty and clean. Don't forget to remove the warm air water pipe and drain the water from the warm air tank.

Step 3: Replace with a new antifreeze.

In order to let the antifreeze flow into the water tank quickly, after about 1 hour of water discharge, then add the new antifreeze through the water pipe of the water tank (radiator), add another bucket of antifreeze to the antifreeze tank, add until the antifreeze tank is almost full, and ignite the car for about 10 minutes.

Antifreeze is generally replaced every two years or 40,000 kilometers. Every car has antifreeze, which has a great effect on the normal operation of the engine. Antifreeze keeps the temperature inside the engine and also helps dissipate heat.

If the antifreeze is not replaced for a long time, it will lead to serious loss of antifreeze in the car.

It is an urban classic SUV produced by Dongfeng Honda Motor Company. Its length, width and height are 4550mm, 1820mm, 1685mm, and the wheelbase is 2620mm.

3.In terms of safety, the CRV is equipped with SRS dual airbags, door crossmembers, front and rear three-point ELR seat belts, seat belt reminder socks, and a seat safety system with pretensioner and load limiter.

Step 1: Check.

Do a thorough inspection first to see if there are cracks and leaks in the pipes, focusing on the bottom pipe (named because there are five interfaces connecting various parts), and the antifreeze must flow through the bottom pipe and then distribute it to different parts of the car to play a role.

Step 2: Cleaning.

Put the old antifreeze out, clean the liquid channel with clean water, add the water to the antifreeze refill tank, and then fill the tank with clean water, so that the water continues to flow through the engine cooling system, and then idle for 3 to 5 minutes, let the water circulate, the water that begins to flow out of the tank is a little pale pink, continue to inject clean water until the water flowing out is clean. Don't forget to remove the warm air water pipe and drain the water from the warm air tank.

Step 3: Replace with a new antifreeze.

In order to let the antifreeze flow into the water tank quickly, after about 1 hour of water release, then add the new antifreeze from the water pipe of the water tank (radiator), add another bucket of antifreeze to the antifreeze tank, add until the antifreeze tank is almost full, and ignite the car for about 10 minutes, at this time, the cooling system due to the exclusion of part of the air, the liquid level has decreased, and then add the antifreeze, as long as the liquid volume is between the highest (max) and the lowest (min).

**: Owner's Guide.

Hello, which CRV check antifreeze are you There is a secondary kettle on the right side of the cabin, and the antifreeze in it is in the middle.