Wired communication uses the wireless router from time to time, please ask the solution

Connect password under Wireless Routing Settings

It feels like someone else has stolen it.

1. Check the wifi signal of your mobile phone.

Please check whether the wifi signal strength in the status bar of the mobile phone is weak, if it is weak, please move the location of the mobile phone or use other mobile phones to connect to this wifi for comparison.

2. Check the router settings.

Please check the router manual, enter the router settings, and check whether to set dual-band or multi-band in one, if so, it is recommended to turn it off and try again.

3. Check your phone settings.

In the phone settings --WLAN --Advanced settings --wifi hibernation, modify the WLAN hibernation policy to "never sleep".

Note: Android 10 and above models do not support setting the WiFi hibernation policy.

4. Reset the network height setting.

Back up the data, go to Settings - System Management - Backup & Reset - Reset Network Settings - Select the corresponding SIM card - Reset the settings, and then use it to view.

Note: Resetting network settings resets Wi-Fi, mobile data, and Bluetooth connection records.

Backup: Go to "Cloud Services" -- Device Cloud Backup -- Backup Data Type -- Open "System Data" -- Return to the previous page -- Back up now, and back up some system settings data.

5. Service center testing.

If the above methods fail to help recover, the customer service center needs to detect and process, the customer service center address: enter the vivo official website vivo**app--my--service outlets after-sales outlets--select the province and city to query the customer service center address;

Tips: It is recommended to bring relevant purchase and hail machine vouchers (such as calling Qingfan: purchase invoice, warranty card, ID card), and consult the staff of the consultation center in advance to ensure that the staff go again during normal working hours, avoid running empty, and pay attention to safety on the way to and from the hospital.

The router is intermittent, the fault point is not necessarily on the router, it must be tested to accurately judge the fault point, and then troubleshoot according to the scope of the fault point, the test method is as follows:

1. Set up the dial-up connection according to the requirements of the operator, connect the stand-alone device to the operator's optical modem, and ping the operator's gateway or DNS server address after dial-up the Internet;

2. If the ping is not working, it means that the operator's external network network is not connected, just call ** to find the operator to report for repair;

3. If the ping means that the external network network is normal, it has nothing to do with the operator's network, and the fault is on the router, restore the router to factory settings, and then reset it to eliminate the fault.

4. If the reset route is still faulty, the router may have a hardware failure and can only be replaced.

The stability of the line itself is not good, but you should be fine if you are so close, you try it with other devices, if there is no problem, it may be a problem with your wireless network card, reinstall the network card driver to try.

Change on-demand connections to automatic connections.

If all the lights on the router are on and then off, the router is not powered and is constantly restarting.

Some routes will be broken when using the iPhone link, some will be disconnected when one iPhone is connected to the other clients, and there is a case where the number of routing access devices is limited.

There are many reasons for this: network problems, router problems, and the usage environment.

1. The router or access point is overloaded (for example, there are many access devices), or the temperature is too high. Restart the router or reduce the Wi-Fi access device, and put the router in a cool and ventilated place.

2. Weak signal or wireless interference. Place the router at a high place or reduce the distance from the receiving device.

Like you before, I once thought that my cute cat and router didn't know who sacrificed to cause this situation, but I rearranged the cat and the wireless router, and then checked and fixed each interface, and then changed the wireless channel as shifou001 said, and then everything was fine

Changing the wireless channel with wireless interference means that you have too many accessory devices.

What is the strength of the signal you receive?

If the strength is not good. That's what happens.

And then there are, are there any problems with your network?

If the network is also intermittent, it is good. It's also like you said.

The road dress and the interrupted time of the device may be the router asking the hall code targeting, not the network problem, it is recommended to do the following:

1. First confirm whether the wireless router is configured correctly and whether the WAN port has obtained the IP;

3. If you can dial up the cat directly, only the router can't dial. Generally, it is a router hardware failure;

4. If you can go to wifi, you can't go on it suddenly. It is related to the router cache, you can dial the power cable behind the router and replug it, and wait until the signal indicator lights up again, and then try to connect.

Share to: In this case, there should be a conflict of IP addresses, that is to say, the IP of your wired router and the LAN port of the wireless router is the same, under this premise, only one device can work normally, you can change the IP of the LAN port of the wireless router, as long as it is not the same as the IP of the wired router, after the change, it is best to restart it to ensure that the modification takes effect, it should be noted that when managing the wireless router, you need to enter the changed IP address in the browser. Generally speaking, the wireless router works in the routing mode, and the routing mode provides address translation function, which can convert the intranet IP address into the IP address of the public network, for example, when using ADSL to surf the Internet, the router needs to work in this mode:

The WAN port of the wireless router obtains the public IP address through PPPoE dial-up, and then the host on the intranet can share the connection. But your situation is that there is already a wired router in front, so the wireless router in the back can not work in the route mode, you need to change to AP mode, the purpose of AP mode is simply to connect the wireless client to the network, if your router is turned on DHCP service (only one router can turn on DHCP service, otherwise it will conflict), then your mobile phone only needs to turn on WiFi, and configured to automatically obtain IP can smoothly surf the Internet; When you don't have a DHCP server, you need to manually configure the IP information, and the subnet mask, gateway, and DNS are the same as those of the desktop, as long as the IP address is not duplicated.

If this happens on your computer, you can try the following methods to solve it:

1. The network card is faulty, and the network card has compatibility problems

If the NIC itself has quality defects or the drivers do not match, you can update the NIC driver or clean the NIC cheat. Check whether the contact between the crystal head and the network card is good.

2. Heat dissipation problem, broadband equipment such as ADSL or wireless router heat dissipation is not good, solution ideas:

In particular, problems such as hot days are more obvious, and poor heat dissipation causes these devices to work slower and less efficient, resulting in the illusion of frequent disconnection. You can use an external heatsink to assist in heat dissipation, and be careful not to stack broadband devices, wireless routers, etc., which only increase the heat dissipation burden of various devices.

3. Virus reasons, due to virus infection, the computer is extremely slow to access the Internet or frequently disconnected

If your computer is slowing down during normal operations or LAN access, it is likely to be caused by a virus. You can directly use the new version of the antivirus software to scan and kill, or ping the gateway to view the traffic.