Wired Broadband how to connect to the router settings

You connect the network cable from the broadband terminal to the WAN port of the router, and then connect a network cable from the router's lan1234 to the computer, and then log in to the gateway of the router to set it, and the specific settings are OK.

Here's how to set up a router to connect to broadband:

1. Connect the power supply of the router, and then plug one end of a broadband network cable into the network port of the computer, and the other end into the LAN port of the router.

2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the username is admin, the password is blank, click to log in, and enter the settings home page of the router.

3. After logging in to the main width page, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the Username and User fields, enter the username and password given by the ISP provider correctly. Be cautious of the model.

4. The wireless router also has a wireless encryption, which is used to ensure the security of users' wireless. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.

The network cable cannot be directly connected to the cat, and the buried calendar needs to go through the router, and the common connection methods are as follows:

1. Insert the optical fiber into the optical fiber jack on the back of the Tianyi broadband cat;

2. Use a network cable to connect the gigabit port of the cat to the blue network cable as an example, the interface can be selected according to its own megabyte size, and then plugged in the power supply to power on;

3. The WAN interface plugged into the router at the other end of the blue bend late search color network cable must not be plugged into the wrong port, and plugged in the power supply to power on;

4. Use a network cable to plug into any interface of the router's LAN with a gray network cable as an example;

5. Plug the other end of the gray network cable into the network cable interface of the computer host.

The network cable from the broadband modem of cable TV broadband is connected to the WAN port of the router.

Connect the LAN port of the router to the NIC port of the computer with a network cable.

For the time being, it is important to unplug the network cable between the broadband modem and the router, otherwise you may not be able to log in to the router.

Log in to the router's settings page, usually, (or refer to the bottom label or instruction manual of the router.)

According to the specific problem type, the steps are disassembled, the cause is analyzed, the content is expanded, etc.

The specific steps are as follows: The main reason for this is ......

The broadband cable is plugged into the router as an input, and then a wire is drawn from the router to the computer, and there is a meter in the double-ended network cable computer store

Then make another plug or buy a new network cable.

The broadband and router plug-in lines are: the LAN socket of the cat - the WAN interface of the router, as shown in the following figure

Once the broadband and router are plugged in, set up the router by following the steps:

1) Enter the IP address of the router in the browser and set the login password of the router administrator (this password is used to enter the router system);

2) After entering, choose the working mode, generally choose the router mode (wireless routing mode) so that you can have your own wifi;

3) Then save, don't restart for the time being after saving, click Unlimited Settings - Unlimited Security Settings, select WPA-PSK WPA2-PSK, set PSK password (WiFi password), you can set the WiFi name in the basic settings;

4) Then save the reboot to take effect, and the setting is complete.

Answer the connection between broadband and router: 1. Online Internet access: 2 network cables need to be prepared, one network cable is used to connect the WAN interface (yellow) of ADSL modem (broadband modem) and wireless router; Another network cable is used to connect the LAN interface between the computer and the wireless router (any one of 1, 2, 3, 4 will do).

**When the cable is connected to the Internet, the correct connection method of the wireless router 2, optical fiber Internet access: 2 network cables need to be prepared, one of which is used to connect the WAN interface (yellow) between the optical modem and the wireless router, and the other network cable is used to connect the LAN interface between the computer and the wireless router (any one of 1 2 3 4 can be). The connection method is the same as the connection method when the ** line is connected to the Internet.

3. Network cable home Internet access: You need to prepare 1 network cable, first plug the home network cable provided by the broadband operator into the WAN interface (yellow) of the wireless router, and then connect the prepared network cable to the computer at one end and the LAN interface of the router at the other end (any one of 1 2 3 4 can be).

It's okay to ask questions. Shoot **.

Dear, I don't have a real picture here. Are you connected to the Internet right now?

This is online, but the ** line may now become optical fiber, if the home is a network cable.