How to have an air compressor wash a well? How to wash a well with an air compressor?

The air compressor is simple to wash the well, suck the drill pipe or pump pipe into the bottom of the well, connect the upper air compressor pipeline, and flush it with compressed air at the position of each section of the flower tube, and the purpose of the well washing is to blow out the debris!

Take a look at the well washing process and the principle is not complicated.

Reply. First, there are many methods for air compressor washing deep wells. Tianshui Jufeng LG standard series electric fixed screw air compressor is recommended, which has very low operating cost and good environmental adaptability. 1. Method:

Increase the suction stroke tube to solve the problem that the performance of the air compressor cannot reach the depth of well washing. 2. Structure: (1) air compressor; (2) air duct; (3) nozzle; (4) water pipe; (5) Suction tube.

3. Principle: The well washing equipment is installed. The air compressor starts to work, the air duct is sent to the high-pressure air flow, and the water in the water lifting pipe is blown out of the well through the nozzle, and the mud water in the well pipe flows into the suction pipe under the action of the water level difference between the inside and outside of the suction pipe, so that the mud in the well is continuously operated, and the water flows out of the well to achieve the purpose of washing the well.

4. Operation process: first lower the suction pipe, then lower the water pipe and air duct, and install it. The length of the lifting pipe is from the ground to the highest water level, plus the height from the highest water level to the nozzle (the height from the highest water level to the nozzle is determined according to the performance of the air compressor), plus 3 5m of submerged water depth.

The length of the suction pipe is the depth of the well minus the length of the lifting pipe. Install and start the air compressor to start washing the well. Start to wash the well because the well is not washed or the well water is not good, the water level does not reach the actual water level, then the water flow will be interrupted, and the water will be stopped and waited, and the water level will rise above the nozzle and continue.

Hello, I am happy to answer your questions, and have found the answer for you, when the submersible pump is running in the well, it is impossible to use the air compressor to directly clean the well. Because the submersible pump is driven by the electrical energy of the yard bridge, the air transported to the well through the air compressor cannot provide the power required for the operation of the submersible pump. In addition, the use of air compressors to clean the water in the well is also a safety hazard.

If you have to clean the water in the well, it is recommended to use professional cleaning equipment, use the front mold wheel correctly and follow the relevant safety operating procedures.

Summary. Pro, the air compressor cannot be used directly for cleaning wells. This is because submersible pumps work by using centrifugal force to pump water out of the well, rather than pushing the water out of the well by pressure.

As a result, the use of air compressors will cause damage to the submersible pump and will not have enough force to push the well water out.

Pro, the air compressor cannot be directly used to clean the Yesheng well. This is because submersible pumps work by using centrifugal force to pump water out of the well, rather than pushing water out of the well by pressure. As a result, the use of hollow spine and presses will cause damage to the submersible pump and will not have enough force to push the well water out.

Wells need to be cleaned, and the usual method is to use a high-pressure water pump to carry the branches. A high-pressure water pump can create a high-pressure water flow that sprays water into the well for cleaning through a sprinkler head. This method can not only clean the sensitive deposits and impurities in the well, but also flush the wall of the well to achieve the purpose of thoroughly cleaning the well.