Which is better, radiator or underfloor heating? It should be cheap and it should work well.

Updated on home 2024-04-10
7 answers
  1. Anonymous users2024-02-07

    **Both are about the same, the heatsink is slightly higher. The effect of floor heating is definitely the best, the floor heating is the whole heating season to be on all the time, there are elderly and children at home, should consider floor heating; The heat sink is turned on when you want, and it is generally used by office workers. In terms of use costs, floor heating and radiators are about the same, floor heating is slightly higher, generally about 100 houses in a heating season (Nanjing December-February) floor heating in 3000 yuan up, radiators in about 3000 yuan.

    Depending on the usage, it can be about 500-1000 worse than the cost that will not be used.

  2. Anonymous users2024-02-06

    It depends on the quality, in fact, the radiator is still good, there is a high cost performance, it is better to try the Capgemini radiator, there are many kinds of materials, and the cost performance is also high.

  3. Anonymous users2024-02-05

    1 Each has its own advantages and disadvantages.

    1. Floor heating: Floor heating is to bury the pipe under the floor, so it looks more beautiful, and it is slowly heated from bottom to top, and the human body will be more comfortable, but it is only suitable for installation in houses that have not yet been renovated.

    2. Radiator: The heating speed of the radiator is fast, the installation is simple, and the maintenance is simple, but the heating is heated by air convection, which is easy to cause uneven space temperature, and the radiator needs to be installed outside, so it will occupy a part of the space area.

    2 Depends on individual circumstances.

    1. Floor heating: For floor heating, if the indoor area is 100 square meters, the water temperature required for floor heating heat dissipation is 50-60 degrees Celsius, then the daily gas consumption of 100 square meters of house heating is about 20 cubic meters, and if it is calculated according to the gas ** yuan cube, then the cost of using floor heating per day is about 40-50 yuan.

    2. Radiator: Radiator is different from floor heating, it needs hot water to reach 80-85 degrees Celsius to dissipate heat comfortably, but the heating speed of radiator is fast, generally speaking, the daily gas consumption of 100 square meters of house heating is about 15-18 square meters, so the daily cost is about 35-45.

    The specific cost still needs to be calculated according to the heat preservation of the house and personal use habits, if you want to save money, then it is recommended to set the temperature at about 16-18 degrees Celsius.

    31. Surface installation: The radiator is exchanged with the internal hot water through its own material, and the indoor air is heated by air convection, and if you want to convection, you need indoor air circulation to make the hot air rise in a state, so it is not suitable for concealed installation, and the surface installation effect is the best.

    2. Open place: It is generally recommended that when installing the radiator, you can try to install it in a relatively open place at home, which is not only conducive to the heat dissipation of the radiator but also conducive to the removal and maintenance in the later stage, but if there are children at home, you need to pay attention to avoid scalding the child.

    41. Fire pit heating: This is the oldest, simplest and most affordable way to heat up, you only need to burn some firewood, straw, coal and other fuels when cooking, but due to air pollution and other reasons, it is rarely used now.

    2. Electrical heating: due to the development of electric energy, most of the heating methods in the south are mainly based on electric energy, such as: small sun, electric oil tin, warm fan, air conditioning, etc., the cost required is mainly calculated by the power of electrical appliances, the lower the power, the more economical it is.

    3. Central heating: For the northern region, central heating is also a very economical way to heat, generally through one or more heat source companies through heating pipes to households in a certain area.

  4. Anonymous users2024-02-04

    Compared with radiators, in terms of cost performance, radiators should be more cost-effective, because floor heating is more cost-effective than radiators, so radiators are more cost-effective.

  5. Anonymous users2024-02-03

    In contrast, floor heating will be more cost-effective, the radiator is only locally heated while the floor heating is more evenly heated, and there is a temperature in all corners of the room.

  6. Anonymous users2024-02-02

    The radiator is more cost-effective, the installation is relatively simple, and it is relatively easy to repair after a problem.

  7. Anonymous users2024-02-01

    The cold north needs to rely on heating to survive the winter, and many people don't know how to choose when = choosing a heating method. Do you know which is better for Dichang to sell heaters and radiators? Many people are thinking about a more practical question, that is, which saves money between floor heating and radiators?

    And the difference between underfloor heating and radiators!

    1. Which saves money between floor heating and radiators.

    1. Floor heating is calculated per square meter. Among them, according to the different domestic and imported brands, the current floor heating per square meter **110 300 yuan. The floor heating materials are different, and the suitable families are also different.

    Based on the area of a 100-square-meter house, the gas bill for 24 hours a month is 1,500 to 1,800 yuan.

    2. The radiator heating uses the wall-hung boiler or boiler to heat the circulating water, and then links to the radiator through the pipe, and finally distributes the appropriate temperature through the radiator to form an indoor temperature difference, and then carries out thermal circulation to make the entire indoor temperature rise uniformly.

    Second, the difference between floor heating and radiators.

    1. Comparison of energy saving.

    a. Floor heating: Although floor heating needs to be heated all day to ensure the balance of temperature, its energy saving degree is much higher than that of radiators. This is mainly because the floor heating adopts low-temperature radiant heat dissipation, and the floor heating has the function of temperature control and temperature regulation, although the opening time is long, but the power consumption is small.

    B. Radiator: The radiator belongs to the air convection heat dissipation, the water temperature is required to reach a certain height, and the radiator has no temperature control device, and the circulating heating must be carried out after the hot water is cooled, so the loss of energy is 30% higher than that of floor heating, and in terms of energy saving, floor heating has obvious advantages.

    2. Comfort comparison.

    a. Floor heating: It is currently recognized as a more comfortable and fashionable heating method. It is heated by low-temperature floor heating, which is "warm and cool", warm and comfortable under the feet, suitable for human body temperature needs; The temperature is balanced, the heat dissipation is uniform, there is no sense of wind, it is not easy to produce floating dust, no noise, and it is hygienic and environmentally friendly.

    b. Radiator: It is a heating method based on convection. The radiator first heats the air around it, so that the air forms a convection flow in the room to achieve the purpose of heating. This type of heating is the radiator around the high temperature, along with the heating.

    The increase of the distance between the pieces, the decrease in temperature, and the temperature difference at the same level is larger, which is especially obvious in large space rooms, and the comfort is relatively poor.

    3. Comparison of heating speeds.

    a. Floor heating: Anyone who has used floor heating knows that floor heating is slower, and it generally takes 24 hours to turn on to achieve better comfort. The reason is that the floor heating uses low-temperature hot water radiation, which dissipates heat slowly, and requires a certain process to heat the room.

    B. Radiator: The heating rate far exceeds that of floor heating, generally open the radiator or so, you can feel the warmth, and there is no need for long-term heating.

    When we choose the heating method, we still choose according to our own financial ability! The above is the floor heating and radiator that we will introduce to you today, which saves money and the difference between floor heating and radiator, and this is the end of it.

Related questions
24 answers2024-04-10

Vaillant is a big German brand, and the quality is needless to say. I'm in the heating industry, so I'm familiar with this brand. Floor heating is suitable for the elderly and children who have been at home for a long time and even like to sleep on the floor; Radiators are more suitable for white-collar workers who have a faster pace of life, and they have requirements for heating speed. >>>More

11 answers2024-04-10

Most of the heating in southern cities is self-heating, and floor heating and radiator heating have their own advantages and disadvantages, and they can be selected according to their own needs. >>>More

9 answers2024-04-10

1.Both radiators and floor heating need to lay pipes, and most of the pipes for floor heating are concentrated on the coils on the ground, so extra attention should be paid during construction. From the perspective of maintenance, if the floor heating leaks, the entire ground of the home needs to be pried open and the pipes of the floor heating need to be replaced. >>>More

15 answers2024-04-10

Copper and aluminum composite is good, let me analyze it with you specifically: >>>More

10 answers2024-04-10

It is turned on around the clock, and if it is used for a long time, the floor heating is more energy-efficient. >>>More