Ask a question about the mouse on your knees to solve

That's a good question

Hehe. Since the mouse fault is eliminated, the biggest possibility is when the interface is faulty, try to change the mouse, and if it doesn't work, see if the capacitors behind the interface have problems such as aging and pulp. You can disassemble all those capacitors and see if you can solve it (don't feel distressed!). ）

If not, the possibility of board problems is the largest, it may be overclocking or poor heat dissipation caused by the temperature of the board is too high, there is a possibility of slight burnout, and the line that transmits the mouse signal is distorted and deformed. This is troublesome, if you have a multimeter, you can test it one by one, no, and don't know if there is a problem, and then tell you a rare trick:

Turn on the power and check if there is a slight short circuit inside! Speaking from experience, the principle is not clear, but it is occasionally believed that phenomena such as leakage in the power supply can affect the lines that transmit mouse signals on the motherboard! In the past, I occasionally cleaned the power supply and bent a metal needle a little, and as a result, similar mouse failures were depressed for n days, and I almost sent the machine for repair, and sent silver to JS!

But it still made the puppet stuffy out.,Bah (applause.)

Not yet? Tell you the last resort: send it for repair

To add that this phenomenon can also occur if the system is used for a long time, there is wear and tear, or the heat dissipation of the machine is not timely, and the temperature is too high.

This is generally a software failure.,Install a special mouse driver to try it.,If it doesn't work, you can reinstall the system.。

When you encounter a virus, some viruses will not destroy your system and will only play with you.

This is called double clicking, if it is a better mouse, you can go to the after-sales warranty if you have not passed the warranty period, if the warranty period has passed, you can change a micro-movement, the specific method can be explained in great detail in the tutorial, if it is not a good mouse, it is recommended to replace it, the reason for this situation is generally the poor contact of the micro-motion. Hope.

Double-click with the left mouse button.

There are four workarounds.

If it's just stealing food from the Internet or something, this thing is enough.

2. After-sales: Generally speaking, regular manufacturers have at least 1 year warranty, and generally warranties can be taken with invoices and complete packaging.

3. Repair: If the electrician is good, directly disassemble the mouse, replace the left button micro-motion and the side button and the middle button micro-motion, or disassemble a usable micro-motion welding from other mice.

If the electrician is not good, go to the pharmacy and buy a bottle of anhydrous alcohol (about 10 yuan, which is not expensive).

Then take the mouse apart, and soak the circuit board and micro switch in the left button directly with alcohol for half an hour (you can press the micro movement to let the inside fully contact the alcohol) ......Then dry in the shade for a day or so, and put it back on.

It can temporarily solve the problem for a period of time (depending on the character, according to the results of my experiments, sometimes it can be solved at one time, and some can be solved on the spot within a few hours, and this situation can only be changed to micro-movement).

4. Buy new ones.

Don't explain it......

Don't explain it. Ask if you have any questions.

If you double-click on the micro-motion, you can either change the micro-motion or change the mouse. If your mouse is very expensive when you buy it, then you can sell it in general, if it is very cheap, then it is good to change it decisively.

The left mouse button is not elastic and the left button is broken.

It's broken, and it's only a few dozen yuan to buy a new one.