How can I see and visit each other in my online neighbors in a Hub environment?

The exchange of visits between 2000 and XP looks complicated, but it is actually very simple:

1.The physical conditions are interoperable, and they can ping each other, and the XP SP2 turns off the firewall (or the access rules are set on the firewall, which is the same as other firewalls);

Perform the network installation wizard that can not be in the same workgroup (of course it is better in one workgroup;

1) Use guest access: XP adopts simple file sharing, and sets the guest password to empty, if there is still a problem, add the guest user to the administrators group - the advantage of this method is that you do not need to enter it when accessing, and open it directly, the disadvantage is the lack of security;

2) Utilize the account access on the accessed computer: XP cancels simple file sharing, disables guest users. When accessing, the username and password dialog box will pop up, and you can enter the username and password of the account on the accessed computer.

If the username and password you are currently using are included in the account being accessed, you do not need to enter them.

All three have the same setup.

First, enable the gest user in the "Computer Management --- Users and Users in the Group", (you can set a password or not).

Then add an IPX SPX protocol in "Network Neighbor - Properties - Select the network connection you are using - Right-click - Properties".

Then in my computer properties --> computer name --> network id next --> select (part of the native business network.) The company doesn't have a network with a domain--- so write the working group (the working group can be written casually or unchanged, but the working group for three machines should be the same).

In addition, the IP addresses of your three machines must be in the same network segment.

Example:;; Subnet masks are.

The gateway is: IP, subnet mask and gateway can be filled in according to the actual situation.

Looking at your profile, your cat may not have a route set up.

It is recommended that you set up the route yourself, and there are many routes on the Internet.

Then set up the things you want to share.

After the restart, the three machines will be able to visit each other from their online neighbors.

First of all, the routing function is only automatic dialing on the Internet, and has little to do with the local area network.

Secondly, after installing the LAN, set up the network connection again for each machine, set up the same workgroup, such as mshome, open simple network sharing for each machine, and add printers and file sharing protocols to the local connection.

Again, go to the network neighbors to see if they can see each other, if not, there are many reasons, but newly installed systems can generally see each other.

Recommended use"Flying Pigeon Biography"Software,File transfer,It's definitely useful,The system must install software,Support wireless,Support multiple file transfers in different directories,Super fast,You can go to the Internet to search for a simple tutorial。

Now you can only access other machines by entering their addresses.

Dizzy, aren't LZs accessible to each other? Could it be that you are troublesome? I don't know why you have to use a lot of questions about the Internet neighbors, in fact, I suggest you use the flying pigeon book software, green software, and very small, not only can realize the intranet file transmission, but also can achieve intranet simple chat.

In addition, the problem of bandwidth usage cannot be generalized. Let's check it first, just turn on a so-called slow machine, see how the speed is, if it's still slow, go check the system settings or software problems. If it's fast, then ask what you're usually doing and grab so many resources.

It's okay to use a network management software to limit the speed, and you don't need to buy a router.

Connect the two computers with network cables.

The order of 568a at one end of the network cable should be:

White-green green white-orange blue white-blue orange white-brown brown 568b, the order should be:

White-orange, orange, white-green, blue, white-blue, green, white-brown, brown, which is commonly referred to as a cross line.

Then set the IP

Another IP and enable file and printer sharing in the network protocol.

Then set up a shared folder.

Set sharing in the right-click properties of the folder you want the other party to open.

And then it's OK.

You have to make sure that NetBIOS is open (by default, but many are banned for security reasons), in the same workgroup, and that you can access the directory or file you want to share. Sometimes you can't see it in your online neighbors, so you can try to access it with an IP address.

Set up the workgroup for both computers to be the same.

And open a guest account in the user account.

Since the two machines are already on the same network segment, just make sure that you are in the same working group so that you can visit each other through your online neighbors.

For example, a workgroup on two machines is set up as a workgroup or something. Set the place in my computer, Properties, inside.。

Not necessarily.

I don't know what network you use, if you are a general ADSL network or cell broadband, only the hub can not form a local area network, the hub does not have this function, there must be a switch at least with routing function, better it is a router.

Unless you're both already inside a local area network.

Turn on the firewall that you want to ping to ping the network neighbors normally - check the network connection - local connection - properties - advanced - settings and turn off the firewall.

There are other antivirus software installed in 360 and other management software to temporarily quit if it still doesn't work to put the machine permissions guest

Run --cmd-- net user guest active: yes

Just start the computer.

Have you tried to see if they can all ping other computers?

Is it possible to bing? Otherwise, re-search the base and share it:

Experience: "Careful application and skillful use in the Internet world.

Experience: Xiaoling "Network Sharing.

Turn on sharing and you're good to go.

Check to see if there is a firewall (e.g., Skynet Firewall, Rising Firewall) that prohibits ICMP packets. Disabling or turning these rules on is fine.

Firewall.

Turn off the firewall.

Or change the firewall settings at all.

The firewall will prohibit ping, but of course you can't

I guess it's a firewall problem. Just set it up and you're good to go.