Mine is a notebook is s46e3317... series, after I restore the factory settings

I just looked at your notebook configuration, if it's a new machine, ASUS series, i5 750G 4G memory, 2G discrete graphics card, very good machine, the machine itself is scheduled to win7 configuration, why should the boss be far away from the factory settings? Do you want to reinstall the system? Then it's better to buy a win7 system CD, you can redo the system at home, if the boss doesn't want to go out to buy a CD, then go to the neighbor's house to borrow a U disk, **There are a lot of win7 system software, **good to the U disk, plug in the computer and re-drive the computer, according to the steps, do it yourself, I don't recommend using the win8 system, at present, win8 has not been promoted in a large area, the current domestic games are a lot of win8 system**end, can't play, also need** win8 patch、It's troublesome、If you want to experience win's humanized interface、win7 can、Handmade、Forget、If it's not clear、Please reply、I'll continue!

Restart according to the prompts, and at the same time press the F8 key during the startup process, select the "Last Normal Configuration" option in the interface that appears, try to see if you can complete the boot, you can try many times, if it still doesn't work, it can only be recommended that you reinstall the system!

Is this a loop?

Then you may lose your files, so you can reinstall them on a CD or USB stick!

If it's a new one, it's a decisive repair station during the three-pack period!

It depends on what you're pretending to be. If it's DOS, then you won't use anything back to the factory state. Or install another system.

If the play is XP or Win8, then it's up to you.

First of all, resetting the computer is not harmful to the computer hardware, and resetting the computer can also be said to be the normal operation of the computer.

Resetting the system is most likely to lead to the loss of user files, so be sure to back up important data when resetting, although win10 can choose to keep user data and software in the reset, but this can not be 100% guaranteed that the data will not be lost.

It is recommended that you back up your computer before doing a factory reset to prevent data loss [laughs].

Hello landlord.

This will definitely not be generated, the system is an important basis to ensure the operation of the computer, the computer does not have any so-called factory settings, but the mobile phone is often mentioned. The computer can establish several restore points to restore the system to a certain day's use state, avoiding problems such as system damage in the future and failure to boot up.

The system can be installed by itself, not afraid, if you really want to restore it, then restore it, it's okay.

Theoretically yes, but you'll want to find a previous system backup.

But the reinstallation system should be the same, except that you have to find some special drivers yourself.

Reinstall the system, just like restoring to factory settings.

Most of the old Bens don't have this feature.

If you look at Disk Management, you don't have this feature without reserved partitions.

Yes, as long as there is an original system disk or supports one-click recovery.

What should I do if I want to restore factory settings?

Here's how to do a factory reset laptop:

1.Click "Start" and select "Settings".

2.Find and tap on "Update & Security".

3.Click on "Recover".

4.Click "Start".

5.In the dialog box that appears, select Yes"Keep my files"Or "Erase Everything", click on the option after confirmation, and the computer will start to factory reset.

In the system settings, you can factory reset your laptop.

Method:1Click the "Start" button in the bottom left corner of your computer, followed by the "Settings" button.

2.Find and tap on the "Update & Security" option in the settings interface.

3.In the "Update & Security" page, find and tap on the "Restore" option.

4.Then click the "Start" button to enter the confirmation page.

5.In the dialog box that appears, select Yes"Keep my files"Or "Erase Everything", click on the option after confirmation, and the computer will start to factory reset.

If you have your own system, you can do so without deleting the backup partition.

You can press F11 to restore your computer.

There is a system recovery, and a factory restore.

The CMOS settings are incorrect.

The CMOS time and date are not set correctly.

Press F1 to enter the settings.

Press F2 to restore the default settings and continue.

Generally, this situation is caused by the failure of the CMOS battery, and the motherboard battery is replaced.

In some cases, it is due to a problem with the motherboard's RAM chip, which requires the motherboard to be replaced or repaired.

Control Panel -> Back up your computer -> Restore system settings or system -> Advanced recovery methods -> Factory reset, provided that your hard drive is not all formatted, because before leaving the factory, there is a recovery hard drive of more than 100MB.

Press F2 to enter the BIOS design, press F9 to enter the factory design, press F10 to save.

This is a restore of the BIOS design.

What should I do if I want to restore factory settings?

As long as you haven't checked the hard disk, there will generally be a hidden partition to put that mirror, generally press f8 to have a repair system, and then select the user, dell, and then keep clicking dotted dots, or when you see the dell logo, press ctrl+f11, this is a different way to different systems, you didn't say what model you are, it's not easy to find, provided that your machine has a pre-installed operating system.

The method of factory reset of Dell computer is as follows (the machine is required to have an operating system at the factory, and the customer has no partition, destroyed the hidden partition or reinstalled the operating system) :(1), before booting into the system, press F8 to enter the advanced boot options of Windows 7, and select "Repair Computer". (2) Select the keyboard input method.

3) If there is an administrator password, you need to enter it; If you don't have a password, just "OK". (4) After entering the system recovery option, select "Dell DataSafe Restore and Emergency Backup". (5) Select "Select Other System Backup and More Options" and click "Next".

6) Select "Restore My Computer" and click "Next". (7) After selecting the correct factory image, click "Next" to start restoring the system to the factory state. Note that the notebook needs to be connected to an adapter during the recovery process.

When you're done, restart your computer. It's the same as the initial state.

F8 - Repair Computer - Restore Dell Factory Mode.

When booting up, press F8 continuously to enter the repair computer interface, and set it according to the prompts (the random manual has a detailed description).

If your computer's built-in system is enough and the original partition has not been damaged, you can do the following:

1. After the Dell logo for boot startup, start pressing the F8 key immediately and press it every 1 2 seconds until the advanced boot options menu appears.

2. In the advanced boot options menu, select Repair Computer Enter to enter the WinRe system3. Click Next.

4. After selecting the administrator username that can be logged in, click OK to continue.

The password is blank by default.

5. Click on Dell at the bottom of the System Recovery option

factory

imagerestore to start vista

pcrestore

6. Click Next.

7. After checking the option to format the hard drive and restore the system, click Next.

Note: Vista

The PCRrestore function will only format the operating system hard drive partition, that is, the C drive) 8, formatting, just wait patiently.

9. The image is being restored, which usually takes 10 to 15 minutes.

Note: In the process of resuming the image of the exit, the progress bar will be repeated many times, which is normal, just wait patiently).

10。After clicking Done, the recovery window will disappear, don't do anything at this time, wait for about 10 seconds, and the computer will automatically restart to complete the recovery.

The system or disk has been corrupted, it is advisable to ask Dell for it.

Then follow the above method.

An unlimited number of factory resets are possible.

Factory reset means that all the things on the C drive and desktop are gone, and they are restored to the way they were when you first arrived.

What should I do if I want to restore factory settings?

Is your computer's original system genuine? If you don't have a system backup, you can't restore it, otherwise, you can use system restore to restore the factory.

Yes......Just go to the settings and find the formatting.

What should I do if I want to restore factory settings?

If your laptop comes with a genuine Windows operating system installed at the factory, but the system cannot be backed up or restored, it is usually caused by the destruction or deletion of the hidden partition of the system. If you can't use the recovery solution software and want to restore the hidden partition or restore the system to the factory's own operating system, it is recommended to bring the purchase invoice and the three-guarantee certificate to the local after-sales maintenance station for recovery.

1. The key to factory reset the computer is to see if the system has a backup, if there is no backup, then there is no factory reset.

Second, if there is a backup image file, then it depends on whether the computer can be started, if it can be started, then use the system recovery software to restore it;

If the system does not boot, then you need to use the PE boot disk to boot the computer, and then use the recovery tool to restore the computer after booting the computer.

If it is a system, you can only find a dealer there, and if it is a BIOS, you can restore the factory settings.

Go to customer service, they have a way, don't fool around, it's easy to get problems, and the gains outweigh the losses.

With an ultra-portable business laptop like the ThinkPad X100E, you can adapt to work and personal entertainment, and you can travel all over the world with one in hand.

What should I do if I want to restore factory settings?

All reinstallation and recovery system is just to format your system disk (the disk where the system is located, usually the C disk), and it does not affect the content of your other disks, so you can do it with confidence. However, if you have important content on your system disk, you need to remove it before reinstalling or restoring it. I remember that it was the F8 that was turned on, and there was a "recovery system (factory)" But each model, the content of the brand's computer prompts is different, but you can operate according to the general prompts,

Sincerely serve you, I wish you health!

Above, please refer to the record, thank you.

I hope the above reply is helpful to you and I wish you a happy life!

Here's how to recover in one click.

Set the BIOS disc to boot and make a ghost drive to restore to the C drive.