-
Anonymous users2024-02-08Cleaning method: 1Each bracelet or pendant uses 10 grams of salt 2
If you use a special purification bowl, you don't need to calculate the amount of water, if you use a general glass bowl or porcelain bowl at home, you need to add it according to the ratio of 500 grams of water per bracelet. The water does not have to be mineral water, pure water, ordinary tap water is fine. This is because the purification ability of omamori salt is strong, much higher than that of geodes, etc., so there is no need for strict requirements for degaussing consumables.
3.If you need to pray for blessings, such as asking for wealth, marriage happiness, etc., after completing the previous step, take out the "Gosho Xuan", also known as the Omori paper, and write your lunar birthday and wishes on the side of the seal of the Gomori. Put the paper in a container.
Paper can be folded. If you don't need to pray for a blessing, just follow step 5. 4.
Place the bracelet in the prepared bowl, and if there is omamori paper in the container, put the bracelet on the paper and pour water. If you have a filter, it's best to put the omamori salt in the filter, and then put the filtering tool in the water. The filter tool is used to avoid impurities and dust particles from scratching the tiger crystals.
5.Wait 24 hours for the degaussing to be completed. The waiting time can be more than 24 hours, but not less than 24 hours.
6.The salt water used during the purification process is discarded, the omamori paper is removed and dried, and then incinerate. Note:
Agate degaussing can be carried continuously for 1 to 3 months at a time. There is no harm in frequent degaussing. Omori salt is not sea salt, coarse salt, or large salt, but is extracted and processed from the sea.
Therefore, it has no corrosive effect on natural agate.
-
Anonymous users2024-02-07The correct way to clean agate jewelry.
Step 1 Prepare your own agate bracelets, agate rings or agate necklaces that you want to clean.
Step 2 Prepare the solution for cleaning: light salt water (10g of salt, 500g of water). Stir well to clean an agate bracelet or an agate necklace.
Generally speaking, the amount of preparation solution can be added according to the proportion of your jewelry. The prepared solution is generally placed in a glass container.
Step 3 Put the agate jewelry into the solution, and soak it for 24 hours to completely remove the bacteria it carries. If you feel uneasy, you can scrub it with a soft cloth.
Step 4 Remove the agate ornament from the solution and pour the solution away. Note: Do not dry the jewelry at high temperatures, which will damage the internal structure of the agate.
-
Anonymous users2024-02-06The method is as follows: 1. Prepare the solution for cleaning: according to the size of the cleaning jewelry, prepare the solution according to the ratio of sodium chloride (i.e., salt) and water 1:50.
2. Put the agate that needs to be cleaned into a saline solution, and soak it for a day and a night to remove the stains it carries.
3. Take out the agate from the solution, wipe the stain with a soft cloth, and dry it in a cool and ventilated place.
Note: Do not dry at high temperatures, it will damage its internal structure.
-
Anonymous users2024-02-05Ultrasound should be able to clean, the kind of gold necklace that jewelry stores wash.
-
Anonymous users2024-02-04When cleaning agate, you need to mix 10 grams of salt and 500 grams of water, place the agate in the solution, take it out after 24 hours, wipe it clean with a soft cloth, clean it 1 2 times a month, not too often, otherwise it will affect the color of the agate, and it can not be cleaned in hot water to avoid agate deformation.
1. Configure the solution to clean the agate need to configure the solution, take 10 grams of salt, 500 grams of water and place it in the container for stirring, the amount of the solution configuration can be determined according to the number of agate, and the configured solution can be placed in a glass container.
2. During the cleaning process, the agate jewelry will be soaked in the prepared solution, and then taken out after 24 hours, enough time can completely remove the bacteria carried in the agate, and wipe it with a soft cloth after soaking, or place it in a cool environment to dry until the surface moisture disappears.
3. Cleaning time: Agate cleaning time should not be too frequent, usually 1 or 2 times a month, too frequent cleaning time will affect the color of agate. Agate should not be added alkaline detergent in the process of cleaning to avoid corrosion, nor can it be placed in hot water to soak, which can easily lead to deformation of agate.
1 Due to the greater attention to jade and jadeite in the society, the collection of old agate is less, and in recent years, the old agate has become popular, and there are many new and old agate products on the market. Generally speaking, the processing of old agate artifacts is manual, while the modern old agate is drilled with instruments, so the hole is relatively rounded, and the processing of old agate will leave some manual marks. >>>More
First of all, it is necessary to choose high-quality quail eggs, the freshness of quail eggs has nothing to do with the patterns on its eggshell, which are affected by the innate conditions and the environment in which the eggs are laid. What we should pay attention to is the color of the eggshell. >>>More
I think it's important to have a printing bed to hold the stone. If there is no printing bed, it is necessary to hold the seal stone tightly when practicing seal carving, and also to grasp the strength of the knife, which will be difficult for beginners.
You don't need to wash the bayberry when it is picked from the tree, and it is no problem to eat it directly. If it is not just picked, it is washed with salt water, and you will find that there will be a lot of small insects crawling out of the bayberry with salt water, of course, this is not good bayberry, put enough water in the basin to fill the bayberry, and then put a spoonful of salt, soak for a while, about five minutes on it, and then put the bayberry soaked in salt water into a basin filled with water and soak it for about two minutes, put it on a plate and drain the water, this method is very useful, the bayberry is clean, But there is a high chance that there will be bugs in it, especially every other day, so it is best to use salt water, and the taste will not change, you can try it.
When you soak it in water, put one or two rusty nails and it will spit out the dirt inside.