Lenovo G460 I3 350M Win7 system changed to XP system

It's much better on the forum, many people have written. Dual, three, and 4 systems are all OK.

Let's take a look, just go to the Zhongguancun Forum to see it.

Take a look, the detailed explanation of the system on the forum, including the partitioning you talked about, and the driver problem are all mentioned.

If you don't understand it, just ask the author directly.

Dual systems are basically more difficult,Need to modify files and other files,Or install XP,200M partition has no problem with installing the systemYou say:"If you do the system directly,After restarting, it will enter the windows7 management console" You can use a U disk or use a disc to make a PE system when booting the BIOS screen, press F12 to select a U disk or optical drive to start,After entering PE, If you want win7, keep it, just make a ghost backup for the c disk, if you don't want it, just format the c disk, install xp under the pe, and the 200M PARTITION YOU CAN DISPOSE OF AT WILL, IF YOU WANT THAT LENOVO GENUINE WIN7 IN THE FUTURE, DON'T DELETE IT, PE, IF YOU DON'T USE IT, DELETE AND MERGE IT INTO OTHER PARTITIONS.

First of all, make a lower version of the system in the main partition, such as: XP and XP in Win7, and then install the Win7 system in other logical partitions, and then find the file in the C disk, modify the name of the login option, or not change, it doesn't matter.

1. Press F2 to enter the BIOS

2. Select CPU settings.

3. Find SATA Mode Selecton4 and press Confirm (Enter).

5. Select IDE or Compatiblity (compatibility mode) 6. Press F10 to save and launch.

7. Set the optical drive to start.

8. Install the XP system (Note: It cannot be installed on the same disk.) ）

There are many ways to reinstall the system, such as: U disk, CD, hard disk are available, here is a way to use 360 software installation method to demonstrate:

3.When you start configuring, follow the beginner's tutorial. First, environmental testing;

4.After the environment is detected, there will be a reinstallation type, one is pure reinstallation, that is, a new system is installed, the contents of the C disk will be updated, and the other disks will be fine. The other is a reserved reload.

That is, the original data file settings are retained after reinstallation. Let's choose according to your own situation. Xiaoqian recommends that you choose to reinstall the retained type, if the data backup is complete or the data is not important, you can choose the pure type.

5.Once the backup is complete, click Next, and then you can rest for a while [It's a bit long].

Hello, I provide you with the way to install the XP system.

Provide you with a way to install the win7 system.

Before reinstalling the system, it is recommended that you back up important content on your computer.

Boot press F2 in the BIOS menu boot to change to a disc to boot the computer It's not easy to recognize, look carefully and you can see that you forgot the specific, and then plug in the disk that comes with it, just restart it on the back so easy

G460 case of the button in the middle of the upper left corner, a button with a folded back arrow pattern, press it after shutting down, enable the "one-click recovery" function, and follow the steps step by step for about 20 minutes. You first right-click on the "computer" - management - disk management, and then see if there is another disk that you already have on the computer, there is another disk that you don't know, it may be called "OEM partition", if this OEM partition is still there, that is to say that the one-click rescue function is still useful, generally speaking, when the computer is poisoned or the system crashes, it is only one-click restore, if the partition is not, it means that the one-click restore function is gone, and you can only go to the Lenovo authorized repair station to repair, and the maintenance time is two hours. Of course, you can also recover with a recovery disc with the serial number on the pink label on the back of your computer.

I haven't used that function for backup, but I heard my classmates say that you can just follow the steps it prompts step by step. However, if your one-click restore function is gone, that is, the OEM partition has been destroyed, then the backup function is also useless.

Hello, I provide you with the way to install the XP system.

Before reinstalling the system, it is recommended that you back up important content on your computer.

XP: After a year, Microsoft will not provide services, you go to buy a W7 for about ten dollars, it's simple.

Buy a professional system CD and follow the normal layout of the system.

If you want to install XP, you can buy a disk directly.,It's very simple.,Win7 is actually very easy to use.,I wasn't used to it at first.,Later, I felt that Win7 was much better than XP.,。 I'm not used to XP yet,Win7Genuine CD nearly 1000 pieces,You buy a computer that comes with genuine win7,It's not cost-effective to uninstall。 ,

It's enough to have a system disk and a drive disk.,Go to the next favorite XP system image on the Internet.,Buy an empty CD and engrave it yourself.,It's troublesome to buy an engraved disk directly.,Just install it yourself.,The place where the notebook is more difficult to install than the desktop is the driver.,But now the driver is easy to find.。

Before reinstalling, transfer the important data of the C drive to other disks, and press F12 until the Lenovo icon appears again after restarting, enter the boot options, select the disc to start, and then follow the prompts.

Today's notebooks are the same as desktop poisons.

It used to be the reason why hard drives were different.

So as long as you have an XP drive.

You can install it directly according to the installation method of the desktop.

I've also encountered this problem, mine is G450, you need to reinstall the system for the first time after you buy a computer, because Lenovo's G series computers have made relevant settings, or there is a problem with BIOS settings.

Workaround: Typical system boot device settings are incorrect. If it's a system issue, this sentence won't be displayed.

Consider two points 1Go into the BIOS and see if there are any errors in the system boot device settings. If you are using a hard disk boot system, see if the first boot device is a hard disk

If not, turn it to a hard disk

2.If it has been set up to boot the hard disk, consider whether the boot file of the operating system is corrupted or missing. If this is the case, boot the computer into the system disk, and when there is a "System Repair Console", select this option.

3.The hard drive is in poor contact or damaged. (This is unlikely, but considerable.)

3.To reinstall the system, if it is a CD, it will be set to CD-ROM boot, and if it is a USB flash drive, it will be set to USB flash drive. Another point is to format the C disk when installing the system,If the fast format is not good, then use the low-level format,Although the speed is slow, but the actual effect is still relatively good。

G460 It seems that it is not good to boot with an optical drive, you can choose to use a USB flash drive to boot and redo the system, and G460's book comes with a disc that is a driver, and there is no system disk.

Use a USB drive to make a PE system, and then ghost

If you want to use the system disk partition, you can choose it directly! If you want to divide it yourself on the computer! You can go to "My Computer" - right-click - Manage - Storage - Disk Management - and assign the size of each disk by yourself!

Preparation: The operating system recovery disc and the important data on the computer are backed up.

1. Press the power to turn on the computer, and when the Lenovo logo appears, click the "F12" key on the keyboard continuously.

2. The "Boot Menu" menu appears, use the keyboard, and select "CDROM".

3. After the XP disc is booted, the screen shows Boot from CD, and after two press Enters, it will boot from the CD, otherwise it will boot from the hard disk.

4. At this time, the Lenovo System Recovery Disc End User License Agreement will appear, type "y".

5. After the hardware detection, the partition status will appear, please press the "D" key at this time to delete the disk partition (please make sure that the selected area is C).

6. At this time, there will be a prompt to delete the partition, please press the Enter key.

7. At this time, there will be a reminder interface for deleting the partition, please press the "L" key.

8. At this time, back to the partition status interface, Area C has changed to "Undivided Space", please press the "C" key at this time (please confirm that Area C is selected).

9. At this time, the interface of entering the partition size appears, please press the "Enter" key directly (it is not recommended to change the size of the C area).

10. At this time, return to the partition status interface again, the C area has been created successfully, please press the "Enter" button.

11. In the disk format interface that appears, select "Format Disk Partition with FAT File System (Fast)".

12. In the disk formatting determination interface that appears, directly enter the "Enter key".

13. At this time, the formatted interface and progress will appear.

14. After that, the installer starts to copy the files.

15. After rebooting (Remind the user not to use the "boot from cd....)when hitting Enter) to continue the installation.

16. After the installation is completed, the system will automatically restart, and then enter the system settings. The first thing you will get to is the Internet connection option. Please select "Skip" to skip this step and set it in the Internet options in your system.

17. After that, the registration screen will appear. Registration has no effect on the use of the system, please select "No, do not register now" and click "Next".

18. You will be prompted to enter the username of the computer you are using, which will appear in the list when you log in. It can also be added in the "User Account in Control Panel" after the system is installed. The username entered here has the privilege of being a system administrator, and there is no password, so you need to create a password and change the permission in the "User Account".

At least one should be entered. It is recommended to enter only one and add it later.

19. After completion, you will enter the XP interface and the system installation will be completed.

Here is a screenshot for reference.

There are many ways to install the computer system, including the optical disc installation method, the U disk installation method, the hard disk installation method, etc., today I will focus on the hard disk installation system method.

First of all, it is necessary to ** a system image, such as the popular Windows7 system image or the previous XP system image, the image file is generally very large, especially win7 has more than two G, if the network speed is not fast, the process is the process of suffering. Generally, the system image format is ISO format.

After loading, you need to go back to the explorer, click on the virtual drive you just loaded, just like the real optical drive, double-click to open, find a file with similar words, double-click to open to start the installation.

The hard disk Anqi Song installation system is relatively fast, because the speed of reading files on the hard disk is faster than that of optical discs and USB flash drives. But only if you have an operating system pre-installed on your computer, because these operations are carried out in the system. This method is suitable for upgrading a system with a lower version to a higher version of the system.

Go to the computer store to buy a ghost version of the system, put it in the optical drive and boot it, choose to install the system to the C disk and wait for it to be completed.

1. You need to set the optical drive to start first, and then install it.

2. The specific installation tutorial can be seen in my store, and there is a detailed introduction.

You have to see if it's an installation disk or a recovery disk! And are you an optical drive boot? Yes, if you don't respond, it's a problem with the plate!

If it's an installation disk, you put the disk in it - boot - press f12 - select odd - enter, it's good to town! It's actually easy!