How to install the network cable?

Based on your above-mentioned requirements, I have selected two ways for you to install broadband for your reference. First, you can go to Shaanxi Netcom Branch to apply for the installation of broadband without ** landline, and the annual broadband subscription fee should be slightly cheaper than that of Telecom. Second, you go to Shaanxi Radio and Television Network Company (which is now promoting digital cable TV in Xi'an) to apply for the installation of broadband, however, the premise of installing broadband for radio and television network is that your residence has installed and opened digital TV.

The annual broadband subscription fee of the radio and television network is not much different from that of telecommunications. For the specific service locations and tariff standards of the two network companies, you can check the ** of the two companies I will connect with you below, or go directly to their business offices for consultation. Finally, I wish you a satisfactory broadband Internet access as soon as possible.

Shaanxi Netcom Branch's service outlets and tariff standards:

Shaanxi Radio and Television Network Company customer service**.

Netcom's customer service** is 10060

Broadcast Networks' customer service** is 76766

Radio and television network call 114 to check**.

Xianyang is basically telecommunications, Netcom, and Tietong.

1. Use a landline or not, and recruit for monthly rent. CDMA wireless Internet access is also available.

2. Call ** to customer service for consultation, and they won't let go if they have money to earn.

3. The charges of each operator are different.

1. Go to the nearby business hall for installation: when handling in the business hall, you need to bring your ID card to apply for installation and payment, you can consult the salesman about the type, **, and finally choose the one you need, under normal circumstances, there will be a special staff to install broadband at home about a week later. 2. Call broadband customer service** to handle:

You can directly dial ** to manual customer service for broadband, for example, if you want to install Great Wall broadband, dial 95079, if you want to install mobile broadband, dial 10086 and so on. When you call customer service, explain the situation and specific requirements of the broadband you want to install, and the customer service staff will arrange for the installer to install broadband at home. Before applying for broadband, you can first understand the content on the Internet, and then choose the corresponding broadband according to your needs.

When the staff comes to the door to pick up the broadband, they will tell the broadband wifi account name and password or set a new wifi password.

Summary. If you want to access the Internet at home, you must first arrange the network cable, but many people do not know how to arrange, now more people will call the service provider's **, please staff to come to the door to install, in fact, the installation of the network cable is not as complicated as imagined. 1. How to install the network cable 1, first of all, we need to prepare a network cable, to stuff the two ends of the network cable into the round hole cutter of the network wire pliers, reserve a distance of 3 5 cm on both sides, and then peel off the outer layer to expose the inner line.

2. Then disassemble the network cable inside and distinguish each color, there are a total of 8 colors. Arrange neatly in a certain order, keep the wire head neat, and then prepare a crystal head, and put the network cable in accordance with the order arranged in advance, to top to the innermost. 3. Next, use pliers to put the crystal head of the network cable in a suitable position, press it hard, and you can hear a click.

After the network cable has been connected, one end is connected to the router and the other end is connected to our computer.

If you want to access the Internet at home, you must first arrange the network cable, but many people do not know how to arrange, now more people will call the service provider's **, please staff to come to the door to install, in fact, the installation of the network cable is not as complicated as imagined. First, how to install the network cable 1, first of all, we need to prepare a network cable, to stuff the two ends of the network cable bucket or into the round hole cutter of the network wire pliers, reserve a distance of 3 5 cm on both sides, and then peel off the outer layer to expose the inner line. 2. Then disassemble the empty network cable inside, distinguish each color, a total of 8 colors.

Arrange neatly in a certain order, keep the wire head neat, and then prepare a crystal head, according to the pre-arranged order, put the network cable in, and push it to the innermost. 3. Next, use pliers to put the crystal head of the network cable in a suitable position, press it hard, and you can hear a click. After the network cable has been connected, one end is connected to the router and the other end is connected to our computer.

2. What processes do you need to go through to install network cables at home 1. If you don't know how to install network cables, you can ask staff to come to install and arrange. First of all, you need to go through the manual customer service of broadband** to understand what type of home you want to install, there are 50 megabytes, 100 megabytes, 200 megabytes, etc., and the hall rolls according to the needs to decide. 2. After determining the type of broadband, go to the corresponding business outlets to open an account and apply for a card, bring your ID card, or pay for a month, or according to our mobile phone**, or a year's fee or two years**.

3. Next, the sales staff will provide you with the light modem, and finally the light cat will be taken back. After that, the staff will come to help you install and debug, and the broadband account and password will be pasted on the optical modem. Once debugged, it will be able to work normally, we just need to enter the password.

The above content specifically introduces how to install the network cable, and if you ask the staff to come to install, you must apply first, and then the staff will come to debug later.

There is one of the easiest and most practical ways to do this:

Use your brain in the room. Since room 1 does not necessarily use the TV function, broadband can meet the requirements with only 4 wires. Hence the suggestion:

Transform the end junction box of room 1, and extract two wires from it as the power supply line of the router, and the other two wires as ** lines or spare. If there is no ** demand, you can use 4 wires for power supply, the effect is better. The schematic diagram is as follows:

Place the router in the entrance junction box, place the transformer of the router in room 1, cut the transformer output line, and connect them to the two cores shown in the figure. Any other rooms and functions are not affected.

Additional answer: Again, it's still the same method, or move the junction box (the little box you talked about) outside. This solves the problem of each room**. Also, if the modem (which I think is actually the router) is placed in the junction box in the way I described, it will not affect any functionality.

Regarding the question that you don't understand that two threads go into the small box and come out are 4 threads, it's also very simple. In fact, that small box is a filter or divider, or understood as a voice and data splitter. Actually, you don't understand this better.

Buy a router, or a wireless router if it's a laptop.

Stop wiring, go wireless. My house was wired and now I regret it.