ZTE U793 mobile phone system how to flash it

ZTE U793 Preparation before flashing:

1. Check whether there is a problem with the SD card of the mobile phone and whether the capacity is sufficient;

2. Check whether the power of the mobile phone is sufficient, generally keep it above 50%, so as to avoid bricking due to power failure in flashing;

After completing the above series of preparations, it is time to start flashing.

ZTE U793 flashing process:

1. First boot the ZTE U793 into recovery mode, and then enter recovery mode.

2. Next, clear the data and cache in the original phone. Use Empty Data first, restore factory settings, and then use Clear Cache to make sure that the cache data in your phone is completely emptied.

This step is very important, if you do not empty the data in the original mobile phone, and re-flash into the new system, the system may not start after flashing due to different data structures, and it has been stuck in the boot animation, so you must pay attention! ）

3. Next, start flashing the flashing package, and select the zip package you want to flash.

4. Select [Select Zip File from SD Card] from the new menu

5、ZTE U793 will show the list of files in the SD card,You will also see the zip file that you just put to the SD card,In this step,You need to select the flash package file that you just copied to the SD card,Confirm after selection。

6. Here will prompt you to ask "Do you want to install the flashing package to the phone", select "Yes".

7. When confirmed, Recovery will start to perform the flashing operation, generally speaking, according to the ROM size and mobile phone configuration to determine the time of flashing, it will not be long before the flashing is completed.

8. When recovery flashing is completed, there will be a prompt.

9. ZTE U793After the flashing is completed, return to the first screen of recovery, select restart the system, the phone will restart, the first initialization system boot time is longer, everyone will enter the new system after waiting patiently.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!