The surface of the Frank Muller full drill is broken, how much does it cost to repair

watch maintenance; 1) When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, which is in contact with sweat for a long time, and is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.

4) Do not put the watch on the power amplifier, stereo, and TV to avoid magnetization.

5) Watches that are not worn for a long time should be wound regularly once a month, and watches with automatic movements should be gently swung back and forth for a few minutes or worn on the wrist for a period of time to make them automatically wind. The parts will not be in a stationary state for a long time to ensure the running performance of the watch machine.

Recommended to go to Hengshida Frank Müller.

Clean the watch from grease.

1. The rotation of the bar shaft is not flexible, and the long-term accumulation and blockage of oil scale is one of the factors causing the failure of the watch.

2. The obstruction is serious and is really solidified, and the hard upper strip is bound to cause broken teeth, so it is advisable to soak in gasoline and wash it to solve it.

3. The lack of axial or radial clearance between the strip box wheel and the strip box cover is another factor of ineffective rotation, which should be carried out with reference to the renovation method of the strip box wheel.

Scope of Services. 1. Maintenance service.

The watch is wet, the watch is wet, the watch is fast, the watch is slow, the watch stops, the watch does not go, the movement is rusty, the dial is rusty, the case is rusty, the luminous fails, the time is faulty, the watch is magnetized, the back cover is loose, the circuit is faulty, and the return to the factory service.

2. Maintenance service.

Watch oil washing, movement maintenance, appearance maintenance, scratch treatment, dial refurbishment, strap refurbishment, watch mask polishing, etc.!

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby. For more information about watch repair questions and related information, you can click **Consultation or Dial** for consultation to provide you with professional watch repair services.

Dear Sir Hello Madam! This is the Franck Muller Watch Customer Service Center, it is recommended to call ** for detailed consultation.

The Frank Muller brand has always embraced and distinguished itself with its tonneau-shaped case and exaggerated numerals, which have also made tonneau-shaped cases a retro trend around the world and made Franck Muller famous. Today, despite its short history of just over 20 years, it has successfully established itself as a classic among watch brands with its innovative designs and movements of ultra-high complexity.

For a watch like Frank Muller, it is a normal situation, and for some serious failures involving important parts such as movements, it is normal to spend tens of thousands of dollars in maintenance costs. It is recommended to improve maintenance awareness during use.

**It is normal, Franck Muller after-sales maintenance center is located in: Room 01, 20th Floor, Yingli International Financial Center, No. 28 Minquan Road, Yuzhong District, Jiefangbei, Chongqing, for more questions about watches, you can call 4008237120 for consultation.

Franck Muller watch after-sales repair center is located in Room 707, 7th Floor, Block 1, Grand Gateway Center, No. 1 Hongqiao Road, Xuhui District, Shanghai, mechanical operation matters: mechanical watches mainly rely on gears to operate, we see how many diamonds will be marked on the watch, this number of diamonds does not mean how many diamonds the watch has, but how many gear shafts of the watch are drilled. But the gear of the watch can not be processed with such a hard material as diamond, it can only use steel as the axle, tens of thousands of revolutions per day completely rely on the trace amount of oil in the drill hole to reduce wear, once the oil is dry, the axle is in dry wear, a few years down, the life of the watch has arrived.

It is recommended that you can open the warranty coupon attached to the watch purchase, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

Frank Muller Aftermarket Center in Shanghai.

Diamond-set lettering: case with diamonds, crown with diamonds, bracelet with diamonds, dial lettering, case lettering, strap lettering, back case lettering, buckle lettering, rotor lettering.

I don't know much about Shanxi, you can take it to Beijing to repair, there should be, whether it is a fake or shoddy product, it depends on the movement and workmanship, and the watch Mengzi will be broken if it is strong and falls, so I hope my answer will be helpful to you!

(1) Wearing a folding table to take a sauna is a completely wrong behavior. Because no matter how many meters or more the waterproof depth is, you can't take a sauna, and you may know that there will be no problems with the appearance of the time, but in fact, the movement has been infringed. Because the appearance of the watch is composed of materials with different expansion coefficients, if the wearing environment temperature of the folding meter is greater than or equal to 50 degrees, there will be a pressure difference in the watch, under the action of air pressure, the air in the watch will run outward, and when the temperature difference is reduced, the outside air will run back into the watch.

The temperature in the steam bath is much higher than the standard, and the air in the watch will run outward when the humidity is higher than the standard air, and some times the water vapor in the table may not appear immediately, but when the temperature in the table is higher than the standard when the temperature is suddenly low, the air in the watch will condense on the glass, forming water droplets or fog, and the heat of the steam will accelerate the aging of the waterproof rubber ring, and the movement cannot be protected normally.

2) The condensation of water droplets confirms that the crystal is sapphire crystal, which is an unscientific practice. Because some mineral glass will also condense water droplets, and some water droplets on sapphire crystals will also disperse, but the degree of wear resistance is the same, what kind of material the glass manufacturer will explain, do not try with water droplets.

3) Rubbing the floor, scratching the glass, etc., confirms the wear resistance of the watch, but we do not recommend customers to test it with destructive behavior. In addition, although high-tech ceramics have a high degree of wear resistance, they are fragile and afraid of falling and violent impact.

Hello, what ** bought, what channel bought?

Frank Muller repairs: For mechanical watches that are not worn for a long time, they should also be wound regularly to allow the mechanism to rotate. As for quartz watches, their battery life is generally 1 to 2 years, and the battery should be replaced regularly, and the sealing ring of the watch should be replaced when the battery is replaced, and it should be tested for water resistance.

For watches with a battery replacement prompt, the battery should be replaced within 3 weeks of the prompt. No matter how deep the waterproof is, you should not wear the watch to sauna, as the heat of the steam will accelerate the aging of the waterproof rubber ring and cannot protect the movement normally.

Franck Muller Watch Care Center: 400-659-0877 What are the methods of dealing with water ingress in the watch?

1. In the usual environment, if our watch is flooded, our watch and the drying agent can be placed all the way. Then just use plastic wrap to put our watch inside. Wait for the day, and the moisture in the table in our hands will dissipate.

2. The disposal technique of the second watch water can put our watch in the rice. Rice is a very common device in our survival, and its application is also very convenient. We just put our watch in the rice and put it on that day. The moisture in our watches is also sucked in.

3. If the verification of our watch causes water ingress, we can also wear our watch on our hands. It won't take long. Within a few hours, the moisture in our watch was reversed and dissipated.

It is recommended to send it to the after-sales service center for testing and repair.

Find a place to repair a diamond, just a place to repair jewelry, and a place to recommend professional jewelry repair.

Franck Muller watch dial oxidation after-sales maintenance location in Shanghai Huangpu District Huaihai Road No. 283 Huaihai Middle Road Office Building 11th Floor Room 04-05, mechanical operation matters: mechanical watches mainly rely on gears to operate, we see that the watch will indicate how many diamonds of the watch, this number of diamonds does not mean how many diamonds the watch has, but how many gear shafts of the watch are drilled. But the gear of the watch can not be processed with such a hard material as diamond, it can only use steel as the axle, tens of thousands of revolutions per day completely rely on the trace amount of oil in the drill hole to reduce wear, once the oil is dry, the axle is in dry wear, a few years down, the life of the watch has arrived.

The service center provides Franck Muller watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, Franck Muller watch exterior parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

The maintenance address is located in Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai.

The faster the water is treated, the better. Otherwise, water will soak into the movement and the movement will rust. When the movement rusts, the short-circuited rust layer on the surface will continue to absorb moisture, accelerating rust formation.

If it is too late and the internal parts are damaged, more maintenance costs will be required. When the watch is heavily immersed in water, it is recommended to wash the movement in the official after-sales service to avoid the watch being discarded due to rust. If water ingress is severe, do not consider disposing of it yourself.

Immediately send to the official after-sales service to wipe the oil, remove the moisture of the movement, avoid rust of the parts, and the official after-sales service professional technicians will serve you with all their might! It's still the same old saying. Please do not delay in repairing your watch and replacing it with a replacement watch.

Franck Muller Watch Repair Center is located in Room 2606, Block B, China Resources Building, Vientiane City, No. 1366 Qianjiang Road, Jianggan District, Hangzhou.

Depending on the degree of damage, there are scratches, cracks, broken corners, and complete damage. If it's just scratches and cracks, if you don't mind it too much, it's actually improvised; If the corners are crumbling and completely damaged, the surface must be replaced. If the damage is severe, it will lead to the unsealing of the watch, which will reduce the waterproof and dustproof performance of the watch with precision operation, and the impact will not only be unsightly.

From the perspective of watch glass material, the plastic glass of old-fashioned watches generally does not burst, but the crystal made of minerals, especially the popular synthetic sapphire crystal, is more likely to burst.

In the event of severe damage, such as bursts, broken corners and severe breakage, and debris is all over the dial, the following measures should be taken immediately:

1. The first action is to stop the watch - pull out the watch handle and stop the watch from running. Because the hands are easy to drive glass shards when they operate, they will scratch the dial and date disc;

2. Secondly, you must not dial the hands and the fast-adjusting calendar at this time, and do not try to remove the broken glass of the dial, so as not to cause further injury;

3. When sending for repair, you need to put the watch flat in the packaging box, the glass side down is better, and there should be no strong vibration and shaking during the repair;

The most important visible part of a luxury watch is the dial, and if the dial is damaged during the repair process, the repair cost will increase significantly. Therefore, during the maintenance process, it is necessary to tell the maintenance personnel not to let the glass shards damage the dial and watch hands.

1.If the material of the watch's hands is susceptible to oxidation, for example, some old-fashioned watches should be extra careful, and the discoloration of the dial is often just right at the corresponding position of the watch hour and minute hand. It is not good to place the watch for a long time, and it is best to wear it properly, which is more conducive to the watch.

2.The watch is worn for a long time, it may be bumped and bumped for various reasons, and it may be dropped, and then the watch cover is loose, so the sealing of the version is not so good, so that the moisture and moisture from the outside world are easy to drill into the watch, and it is also very easy to induce the discoloration of the dial, or the paint of the dial cover peels off, which is characterized by more occurrences on the edge of the dial.

Each watch has a different movement type, which leads to differences in the accuracy of each watch. The watch relies on the internal mechanism to control the uniform and accurate time of the watch, because the internal mechanism of the watch is affected by many external factors, such as gravity and ambient temperature differences, which will cause errors in the watch. In general, the error of mechanical watches is calculated on a daily basis, although they are different due to the differences in the movement model and manufacturing quality of each watch, but the error is generally less than 30 seconds per day, and this degree of error is normal.

Of course, some of the higher precision movements can have an error of about 10 seconds. In general, there are several situations that will cause the sudden increase in the timing error of the watch.

1. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise of the automatic watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. The watch is magnetized: If the hairspring of the mechanical watch is magnetized, the watch will not be accurate.

3. Need for maintenance: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, and it needs to be sent to the designated maintenance point for maintenance services.

4. Hit or impacted: The watch is very precise, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

5. In addition to the above common situations, the influence of some ambient temperature and the wearer's usage habits may cause an increase in the timing error. But you don't need to worry, please send the watch to the designated repair point for professional inspection and adjustment, and the watch can be restored to the normal error range.

The above 5 situations are usually the reasons that may cause the watch to have a time error, once the watch has a time error, we must find the reason, so as to find the corresponding solution, to avoid other reasons can not be solved in time and cause the watch to appear more serious.