Is there a problem connecting your MacBook Pro to your wireless network!!

1. Poke the reconfigured hole in the back of the router with a sharp object for 5 seconds.

2. Disconnect the power supply for 15 seconds.

3. Plug in the power, restart the computer (even if it is not turned on), check the wireless network, and connect.

4. Open the webpage as quickly as possible, and enter the router IP address written at the bottom of your router on the address bar) 5. After the page is opened, enter admin in the username, the password is empty, just enter directly.

7. Configure your Internet connection, anyway, my home chooses a dynamic IP. I don't know about you, try it.

8. Then make up the name by yourself, preferably "Enable WPA WPA2 Wireless Security (Enhanced)".

9. Enter your own password (8-63 characters, numbers 0-9.) in the network password, letters a-z, a-z).

10. OK, remember the username and password at the end, just press Save.

Give me a point, it's so hard.

Enter the router settings interface--

WAN port setting--

Enter the account password and type (PPPoe or static IP, etc.), here is usually the normal mode, if not, try the rest of the modes once --

Look at the status, the ip is not 0 0 0 0 it means that the connection is successful (the rest of the settings are basically unchanged, and the password settings are found in security)--

Whether you use Windows dial-up or DLINK dial-up, use DLink dial-up method, and turn on DHCP service!

The specific way is to log in to your router, there may be a WAN setting, enter the password according to the prompts, save, OK! If you still can't get it, leave an email or QQ!

LS high people,I'm similar to the landlord's problem.,I'm using the kind of router that telecom.,I use the MAC system in many coffee shops to connect to the Internet.,It's not at home.。 And its scratching head, my mailbox,

Summary. 1. Check whether the system time in the lower right corner of the system is the correct time, if not, change it to the current correct time.

2. If the time is normal, check whether the computer has Fengxing Accelerator installed, click the lower left corner of the desktop to start - run, enter %appdata% funspeed, press enter, delete the funspeed folder cleanly, restart the computer to try.

3. If it still doesn't work, first check whether there is software such as PC Manager or 360 Security Guard or anti-virus software installed on the computer, if so, exit these software, and then restart WPS login to try.

4. If it still doesn't work, go to the task manager to find the process, then end the process, and then restart the WPS login

5. If it still doesn't work, click Start-Run in the lower left corner of the desktop, enter %appdata% kingsoft office6 homepage, press enter, and delete homepage

6. If it still doesn't work, click Not logged in, set the arrow in the upper right corner of the pop-up window - Settings**-http**, set it as the address: Port: 37070, and then log in again

MacBook+Pro failed to connect to the network.

Hello, we have received your question and are working hard to prepare the answer for you, and will reply to you within five minutes! Wait a moment! ^

Hello dear, glad to answer for you! MacbookPro can't connect to the network solutionFind the network-location-location-dot new location, application, it's OK.

Location not found.

Wait. WPS is not available.

1. Check whether the system time in the lower right corner of the system is the correct time, if not, change it to the current correct time. 2. If the time is normal, check whether the computer has Fengxing Accelerator installed, click the lower left corner of the desktop to start - run, enter %appdata% funspeed, press enter, delete the funspeed folder cleanly, restart the computer to try. 3. If it still doesn't work, first check whether there is software such as PC Manager or 360 Security Guard or anti-virus software installed on the computer, if so, exit these software, and then restart WPS login to try.

4. If it still doesn't work, go to the task manager to find the process, then end the process, and then restart WPS login to try 5. If it still doesn't work, click on the lower left corner of the desktop to start - run, enter %appdata% kingsoft office6 homepage, press enter, delete homepage 6. If it still doesn't work, click not logged in, and the arrow in the upper right corner of the pop-up window - settings**-http**, Set to address: Port: 37070 and try again

If a broadband fault occurs, you can use the following methods to troubleshoot the fault:

1 Use stand-alone dial-up, if you are using a router, please temporarily disconnect the router for testing;

2 Restart the modem and the computer;

3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.

If the self-troubleshooting still does not recover, you can log in to the mobile phone business hall Customer Service Broadband Fault Report for feedback, and we will get in touch with you as soon as possible.

You're not connected! What is the situation to say in detail. Got it, you have a ......Apple's could have been fitted with the latest W7.

All I know is that the latest Apple instinct runs w7. Older systems may not be compatible! Try changing to W7.

I guess the xp of your home improvement.

A lot of Apple's software is not compatible You can see for yourself the landlord hu

Try turning off your Mac's wireless network.

1.When we find that our Mac computer can't connect to the wireless network, we can first try to turn off the wireless network. Tap the wireless icon, and then tap the "Turn off Wi-Fi" option.

2.Then turn on the wireless again and try to reconnect the wireless to see if it can connect.

Restart your Mac computer.

1.If you still can't turn off your Wi-Fi after trying the methods above, you can also try restarting your Mac and then trying to connect to the Wi-Fi again.

Restart your router.

1.If you still can't connect to the wireless after restarting the computer, you can try restarting the router. Because sometimes the router may not be able to connect after running for a long time.

Delete the wireless cable configuration.

1.There is also a situation where you can successfully connect to a wireless network before, but suddenly one day you find that you can't connect successfully. If this is the case, we have tried the above method as well, and we can also try to delete the wireless profile and then reconnect the wireless.

4.Then click on the "Remove" button.

5.Finally, turn off wireless network management and try to reconnect to the wireless network to see if that solves the problem.

It's the same at home, and I use the Infinity Cat that comes with China Telecom. Generally, in other systems, it is enough to use an unlimited link and then establish a broadband link. But not on Mac.

You can only use a wired link to access the Internet, and the troublemakers are all doing you a favor!

Router Problems Set up your router again.

It is recommended that you change to a better router, such as one with a bandwidth of 300M.

Generally, the wireless router (WiFi) of the MBP connection is unstable or dropped, which occurs in:

Use a non-Apple wireless router.

It is far away from the wireless router.

Possible reasons are:

The "channels" between you and your neighbor's wireless routes conflict with each other (if it's a tower, or if your neighbor uses a lot of wireless networks, the interference can be very serious).

The bandwidth of the frequency band is "too low, and the ability to penetrate the wall is not strong (if you are going up and down the stairs or the area of the house is relatively large, this situation will interfere with the signal severely).

The wireless signal "mode" is too old (this kind of disconnection mainly occurs when the wireless routing "mode" option is selected as "automatic", when you have a second wireless device in your home trying to connect to the wireless network, if the wireless module of the second access device is old, the wireless router will automatically adapt to the old transmission mode).

The "maximum transmit rate" of the wireless signal is too low.

Solution (emphasis):

In the case of MBP access to your home network (wired or wireless) (i.e. you have access to the Internet) (important).

In the MAC (win can also be) system, open any browser, in the "address bar" (that is, where you enter, or the place) enter here tp-link router as an example, different brands and different countries of wireless router settings may be different, please refer to the wireless router manual), in the pop-up dialog box, "username" and "password" respectively enter "admin"."(both lowercase).

Go to the settings interface of your router, and under "Wireless Settings" on the "Left", select the "Basic Settings" sub-item to enter the Basic Settings option.

Changing "Channel" to "9" (the automatic default channel of wireless routing is generally 1, 3, 4, and 6) to "9" generally does not conflict with other routes and is not easy to drop.

mode" to "11n only.""。

Band bandwidth" to "40MHz.""。

The maximum transmit power is changed to the maximum (300Mbps here for me, and about 150Mbps for a typical router).

Click "Save" (important) and the wireless route will automatically restart.

This setting can basically solve the problem of the wireless route dropping of the MBP connection.

Let's do this first:

Reset PRAM and NVRAM

1.Turn off your computer.

2.Find the following keys on your keyboard: Command, Option, P, and R. You need to press these keys at the same time in step 4.

3.Start your computer.

4.Press and hold the command-option-p-r key. This key combination must be pressed before a gray screen appears.

5.Press and hold the above keys until your computer restarts, and you'll hear a startup sound again.

6.Release these keys.

At this point, your computer's pram and nvram have been restored to their default values. On some models, the clock setting may revert to its default date.

If not, go to the router settings interface and set the channel to within 10.

If it doesn't work, you can consider it a hardware problem.

The iMac computer can't connect to Wi-Fi, so teach you 1 trick to set it up right away.