Two computers use one network cable, how can it not affect the speed

It's not allocated by 50, and advanced routers only have a speed limiting feature, which is to limit the traffic of one of the computers.

A normal route of about 100 is a normal route that provides multiple computers.

Then it is inevitable that the other one will be affected. Mine is routing, and my brother and I have a computer.

When I use it, I just unplug his network cable, haha.

Not according to the distribution of half.

In fact, you can also ask for half, and you can limit the speed on the router. . . . Take a look at the manual settings!

Not on a 50% basis.

If the bandwidth of 2M can reach the network speed of 200kbs, and a computer will take up 150kbs or even more bandwidth to watch ** movies, then your computer only has 50kbs of speed.

In the same way, if he accounts for 190kb s, you will have 10kb s left, and it is inevitable that it will be very stuck. Online TV accounts for the Internet speed, but Youku does not account for the Internet speed. You can watch movies on Youku.

Limit it with the speed limits of the route manager.

Routers are like that, they can lose some speed.

The next limited traffic software Jusheng network management cracked version This is very simple to search for yourself.

The popularity belongs to P2P software, of course, it accounts for bandwidth. How can a router be half the network speed?

In the city, basically every household has a network, and in the countryside is slowly popularizing, when we pull the network cable to connect the network, there may be only one network cable interface, but when there are multiple devices need to use the network cable, the installer may divide a network cable into two to use, so, the network cable is divided into two affects the network speed?

The network cable is divided into two, which can achieve the simultaneous use of the network cable by two devices and be able to access the Internet at the same time, which can save us some unnecessary trouble. However, if the bandwidth used is more than 100M, then it will still have a certain impact, because the maximum carrying capacity of the network used after the split line is generally the highest 100M, so the original bandwidth of the network above 100M will generally be subject to speed limiting.

However, if the network used is originally less than 100m, then there is no need to consider the network speed drop caused by the use of branch lines, and the basic impact is negligible. Of course, if you want to use several devices at the same time with a bandwidth of more than 100 Mbit/s, you can choose to purchase a power modem, an optical modem that supports blind mating, or a switch to solve the problem.

If one network cable is split into two cables and used at the same time, the speed will be slowed down.

Reason: Although splitting into two uses solves the problem of network connection, that is, both network cables can be connected to the Internet, and computers can also access the Internet, but when browsing and ** at the same time, the uplink rate and downlink rate of a network cable will be halved accordingly, which increases the pressure on the network cable to transmit data and reduces the efficiency of data flow.

Solution: Connect the home network cable directly to the router and separate two lines for use, so as to avoid the disadvantage of using one network cable at the same time.

Here's how:

1. First of all, connect the home broadband network cable to the WAN port of the router, and divide two network cables through the LAN port.

2. After connecting different terminal devices, set the IP address in the computer celebration, if the default IP address is, you need to take any IP address as the IP address of the computer, and set the subnet mask to.

<>4. After entering the router settings page, bend and pat the touch, click the setup wizard and set it according to the prompts, and select PPPoe.

5. Enter the Internet password provided by the operator.

Theoretically, it's an impact, but it's actually nothing, and it can be used. Within 50 meters.

If it's adsl broadband, follow what I say step by step.

First: go buy a router, then connect the ADSL cat to the router, and then connect your two computers to the router. The cat comes out of the RJ45 network cable and connects to the Wal port of the router.

Then the port of the router is connected to your computer.

Second: After connecting, check what is the IP of the gateway device on the label at the bottom of your router, generally or, and then enter the IP of the gateway in your IE** input bar, then enter the router settings page, third: start setting after entering, the most important thing is to access the Internet is "PPPoe" and then enter your Internet user name and password.

Then store. At this point, the router automatically reboots. You can get online.

As long as both computers have network cards, they can be directly connected through the network cable, and then set the IP addresses of the network cards of the two computers to the addresses of the same network segment.

You can probably understand what you're trying to do! Next time, it is recommended to directly say what you want to achieve, such as how to quickly transfer the resources of one laptop to another.

The router is plugged in, and the two network cables are connected to the two computers from the LAN port of the router, and the two computers are installed with the "Flying Pigeon Story", and then turn on, with a transmission speed of 15M+ s

With cross-wires, you can share resources with each other!

Connect the wire with a crossed line.

The common network connection method is to connect the computer and the switch with a straight cable (the same connection method at both ends), using the B connection method.

The method of making a crossed line is to swap one end of the B line with 1 and 3, and 2 with 6.

The specific figure is as follows:

One end: white-green, green, white-orange, blue, white-blue, orange, white-brown, brown.

The other end: white orange, orange, white-green, blue, white-blue, green, white-brown, brown.

If your computer is well configured, your computer is fast

Add a router and use two network cables, one end of the network cable is connected to a computer, and the other end is plugged into the router.

The routing is relatively simple, a fast one, about 60 80, and a wireless one, about 100.

Just buy it back and read the manual, it's simple and easy.

568A Standard: White-Green, Green, White-Orange, Blue, White-Blue, Orange, White-Brown, Brown.

568B standard: white orange, orange, white-green, blue, white-blue, green, white-brown, brown.

Dual-machine interconnection is to do crossing: one end adopts 568A standard, and the other end adopts 568B standard;

When making the crystal head, make the shrapnel of the crystal head face outward, the wire inlet face down, from left to right, follow the above line sequence, fully insert the wire (to see the copper core of the twisted pair at the top of the crystal head as the standard), and then clamp it with a network cable pliers, and you're good to go!

If you connect two computers directly, the network cable is different from the normal cable, so you need to use it"Cross lines", that is, the line sequence inside is not the same, and it needs to be purchased or made specifically.

Go to the computer market to buy it, it's more convenient, and the instructions when you buy it are"Cross lines"Can.