What is the speed and temperature of the fan??? 20

Press F8 to enter the BIOS when you boot up, there is a pchealth-fanspead- just look at the results, the boot temperature, some motherboards support some not.

For the sound of Titica.

First of all, consider the hard disk, if it is like the sound of gently flicking glass and irregular, then you don't have to worry, no problem, it's just that the hard disk is reading the file, and the file is "too far away", organize the disk. It may also be a problem with the hard disk itself, some manufacturers' hard disks are loud as soon as they leave the factory, such as Hitachi, and this is the case if you can't organize the disk.

Consider the fan again, the fan is generally humming, and the power is rustling, but if the bearing is broken, there will be a clicking sound, and the sound must be regular, then you have to change the fan, your computer is just bought is not likely, unless it is an inferior fan.

Nowadays, fans are related to temperature, and the higher the temperature, the faster the speed.

Some BIOS also provide settings to change the fan speed, which can be found.

In fact, no matter how high the speed is, there should be no clicking sound. You still discern carefully.

Let's take a look at what it sounds like.

First of all, your fan must support the speed test function. Second, the easiest way is to look in the BIOS of the computer, and third, if you are not too troublesome, you can install a computer monitoring software to watch under Windows!

It's best to open the case and see where the sound is coming from, so you can rest assured.

The temperature is turned on and there is a display in the lower left corner of the screen.

The speed should be seen in the bois, as long as you don't fix it, you can find it casually.

It can be viewed through Master Lu software, and the specific viewing method is:

<>4. In the software interface of the jump, you can check the speed of the fan.

How to check the fan speed of the computer talking about Zhaoyin:

Method 1: Use BIOS

BIOS is an abbreviation for the Basic Input and Output System of a Computer, and it is the first program to run when a computer starts. In the BIOS, you can check the speed of the computer fan. The specific steps are as follows:

1.After powering on, press the DEL key or F2 key to enter the BIOS interface;

2.Once you are in the BIOS, find "Hardware Monitor" or "PC Health Status" and similar options;

3.In this option, you can see the speed information of the CPU fan, case fan, etc.

It should be noted that the BIOS interface of different brands and models of computers is slightly different, but it is similar.

Method 2: Use third-party software

In addition to the BIOS, you can also use third-party software to check the speed of your computer's fan. These software often have richer features and more intuitive interfaces. Common software is speedfan, hwmonitor, cpu-z, etc.

Taking SpeedFan as an example, the specific steps are as follows:

2.Run the speedfan software, and you can see the speed information of the CPU fan and the chassis fan in the main interface.

Method 3: Use a hardware detection tool

In addition to the software, the room can also use a hardware detection tool to check the speed of the computer fan. These tools usually need to be plugged into the motherboard of the computer and can monitor the health of the computer's hardware in real time. Common tools are AIDA64, EVEREST, etc.

Taking AIDA64 as an example, the specific steps are as follows:

2.Run the AIDA64 software and select the "Sensor" tab in the main interface;

3.In the "Sensor" tab, you can see the speed information of CPU fans, case fans, etc.

It should be noted that when using the hardware detection tool, it is necessary to select a tool that is compatible with the motherboard of the computer, and install and use it correctly according to the manual.

To sum up, knowing the speed of your computer's fan is very important to determine if your computer's cooling system is working properly. You can check the speed of your computer fan through BIOS, third-party software, hardware testing tools, and other ways. It is important to pay attention to choosing trustworthy software and tools and using them correctly according to the instructions.

The fan speed of the computer can be viewed using Master Lu software.

Fans are common appliances in homes and offices that are used to dissipate heat and cool down. The speed and temperature of the fan are important indicators to judge its normal operation.

First of all, the speed of the fan should be within a reasonable range. Generally speaking, it is relatively normal for a household fan to rotate between 1000-1500 rpm. If the speed is too low, the cooling effect of the fan will be greatly reduced, so that the head of the argument will not be able to perform its maximum effect.

If the speed is too high, noise will be generated and the service life of the fan will also be affected.

Secondly, the temperature of the fan is also something to pay attention to. Normally, the temperature of the fan should be between 40-60. If the temperature is too high, it may cause damage to the motor or deformation of several pieces of the fan blade limbs.

In addition, high temperatures can also accelerate the aging of fans, thus reducing their service life. Therefore, we need to check the temperature of the fan regularly to ensure that it is within the normal range.

To sum up, the speed and temperature of the fan are the key indicators to judge its normal operation. If the speed is too low or the temperature is too high, it may affect the use effect and life of the fan. Therefore, we should pay attention to check the speed and temperature of the fan to ensure that it is operating within the normal range.