Is the computer nailtalk microphone not good? 50

Find the sound icon in the bottom left corner of the desktop.

Please click Enter a description.

Right-click - Open the sound settings.

Select, test the input source.

The system service is manually reconfigured, and the specific solution is as follows:

1.Start --- run on"Name"Found"windows audio"Select it --- the left mouse button --- right-click --- select"attributes"--- regular --- startup type --- automatic.

2.Check whether the sound card, cable, speaker, and other devices are connected properly. If you have a virus, you should run antivirus software for full antivirus.

3.Open the Control Panel--- Add New Hardware--- Next, and when the search is complete, click "No, I haven't added this hardware" and click Next. In the dialog box that appears, check Click Done, Shut down the computer, restart to add new hardware.

4.Note that this refers to shutting down and then starting, not restarting. In general, the problem can be resolved after rebooting.

FYI!

Method steps.

Open the desktop version of DingTalk.

DingTalk microphone has no sound, how to set.

Find the DingTalk group you want to start live streaming.

DingTalk microphone has no sound, how to set.

Click Start live stream.

DingTalk microphone has no sound, how to set.

Go to the live stream and click on the sound settings above.

DingTalk microphone has no sound, how to set.

Turn up the microphone louder.

DingTalk microphone has no sound, how to set.

It is summarized as follows. DingTalk microphone has no sound, how to set.

Right-click the "Speaker" in the lower right corner of the mouse, the drop-down menu appears, click "Recording Device", in the sound interface, right-click the mouse, click "Enable". On the live streaming interface, click "Sound Settings" in the lower right corner, click Turn on input sound, and turn the input sound to the maximum, detailed steps:

1. First of all, on the computer desktop, right-click the "speaker" in the lower right corner of the mouse, the drop-down menu appears, and click "Recording Device".

2. In the sound interface, you can see the situation of the recording device, if it is normal, you don't need to modify it by default, if it is deactivated like the figure below, you need to right-click the mouse and click "Enable".

3. If it is successfully enabled, you can come to the live broadcast page to try if there is a sound, if there is, you don't need to set it, otherwise, if there is no sound, you need to set it separately.

4. In the live broadcast interface, click "Sound Settings" in the lower right corner, the position of "Sound Settings" is different for different live broadcast modes, here "Camera Mode" is taken as an example.

5. In the sound settings, observe the two positions, if the input sound is off, click to turn on, and move the slider of the input sound to the far right.

6. This is set up, and there will be sound in the live broadcast.

1. The microphone problem of DingTalk may be that the DingTalk microphone is disabled, and the microphone permission of DingTalk should be manually enabled. How to do it;

2. Turn on your phone, find the settings on your desktop, and click in.

3. Go to the phone settings, click on the app, and select App Management.

4. In the application management, find DingTalk and click it.

5. After entering DingTalk, click on permissions.

4. Enter the live broadcast, at the top of the live broadcast page, find the "Sound Settings" option, and click it. After clicking, several options will appear, such as "Stereo Mix", "Built-in Microphone", "Speakers and Headphones", etc., below each item, there is an "Input Volume", gray is no volume, white is normal, users only need to point the input volume under the built-in microphone to white, and then adjust the sound volume. If necessary, you can click the volume input under the speaker to gray out to avoid letting the sound of the speaker enter the live broadcast and cause noise.

The reasons why the computer can't hear the sound of the other party are as follows:

1. Flushing may be that the microphone volume is not on.

2. It is also possible that the microphone is broken, or the joint is caused by poor contact.

3. It is also possible that the network beam is not hungry, resulting in sound delay, or the transmission cannot be passed.

DingTalk is China's leading smart mobile office platform, powered by Alibaba Group.

Developed and officially launched in January 2015. The platform is provided free of charge to all Chinese enterprises for business communication and work collaboration, helping Chinese enterprises to improve the communication and collaboration efficiency of Chinese enterprises in an all-round way through systematic solutions.

The ding message sent by DingTalk will be notified to the other party in the form of free ** or free SMS or in-app message. Regardless of whether the receiving mobile phone has DingTalk APP installed or not, or whether the network traffic is turned on, you can receive the DING message, so that barrier-free information must be reached. When the receiver receives the ding message reminder**, the number is displayed as the sender's **number, and the receiver answers**After hearing the sender's voice message, if it is a text message, the system will broadcast the text to the listener, and the receiver can directly enter the rubber return voice reply, and the sender can receive the reply in time.

1. Mobile phone permission settings:

1. First of all, find the "Settings" app on the main interface of the phone and click to enter;

2. After entering the settings page, click on the "Application Management" option;

4. After entering the DingTalk application information page, click "Application Permissions";

5. After the page jumps, click the "Microphone" option on the page;

6. Finally, in the jump page, select the "Allow" option.

Through the above steps, you can enable the permission setting of DingTalk microphone on the mobile phone.

2. Set the microphone volume on the computer

1. Log in to DingTalk on the computer;

2. Then, in the message list on the left, select the DingTalk group that needs to initiate a live broadcast, and click to enter;

3. Then, in the lower right corner of the group chat window, click the "Start Live Stream" button;

4. After entering the live broadcast interface, click the "Sound Settings" button in the upper left corner;

5. In the pop-up window, you can press and hold the slide button and move left and right to adjust the sound volume.

It must be needed, otherwise the other party will not be able to hear without a microphone.

Microphone connection is a popular term on the Internet, which refers to two people turning on the microphone at the same time to interact with each other. The microphone first appeared in YY Voice.

A form of communication.

That is, there is a person who wants to open two numbers (for example, AB), and then a person arranges microphones on it, and B is with another person who pretends to be a microphone with you (called C), and then we call the place where A is in Hall 1, and the place where B and C are in Hall 2.

Focus on explaining the setting of the microphone connection A to open karaoke

And it is necessary to use hardware mixing, otherwise the people in the 1st hall of C speaking will not be able to hear it, because the software mixing will only capture the first disturbance of the ** device B to turn off the microphone and lack rent (or open the microphone order to let C on the microphone, as long as there is only C in the 2nd hall talking), and then C wants to open karaoke This is arbitrary, as long as it can sing normally, so you can start to connect the microphone.

Here's how to turn off the microphone by DingTalk:1. Open the DingTalk group and click "+" in the lower right corner of the interface

4. Then we click "Start Meeting".

DingTalk

DingTalk is an enterprise instant messaging application launched by Alibaba Group in China, which provides multiple languages and supports multiple operating systems, developed by Alibaba Group and officially launched in 2015. The platform is free for all Chinese enterprises, providing PC, web, Mac and mobile versions, and supports file transfer between mobile phones and computers.

It is used for business communication and work collaboration, helping Chinese enterprises to improve the communication and collaboration efficiency of Chinese enterprises in an all-round way through systematic solutions. DingTalk was planned and launched in January 2014 by Alibaba Cooqing Group, and was built by Alibaba's product team, focusing on improving the office and collaboration efficiency of Chinese enterprises.

On December 1, 2014, DingTalk released the beta version; On December 12, DingTalk released a beta version and launched an enterprise group to make messages more secure according to the needs of enterprise users.

Take Huazhen infiltration as p40

System,DingTalk version shouting Lu as an example,DingTalk does not have a microphone to speak, and others can't hear the reasons may be:

1. The microphone of the DingTalk meeting may be turned off, so the other party can't hear the sound when talking during the DingTalk meeting.

2. It may be that the volume is adjusted to the minimum, and the other party can't hear the sound when talking during the DingTalk meeting.

3. It may be that the network is unstable and the other party cannot hear the sound.

4. If it is in a meeting, the host may have set all staff mute.

This answer is for the DingTalk version.

DingTalk microphone setting method:

First of all, find the "Settings" app on the main interface of your phone.

and click Enter; Once you are on the settings page, click on the "App Management" option; Then, under the Application Management page, find and click DingTalk. After entering the DingTalk application information page, click "Application Permissions"; After the page jumps, click on the "Microphone" option in the page; Finally, in the jump page, select the "Allow" option.

Tools Raw materials: iphone13 pro, ios16, dingtalk.

1. Open DingTalk on your phone.

2. Click to open the group chat in the address book interface.

3. Click the plus sign in the lower right corner.

<>5. Click the microphone icon in the lower left corner.

6. In this way, you can turn off the microphone and mute the sound.