N97mini was the first network to be set to wifi,Go to a place where there is no wifi and don t even

The following are all original! It's all typed out with a mobile phone.]

I'm also n97 mini and just used wifiNow that the routing is turned off, I'll use GPRS for your question....I also encountered the same dilemma as you when I first used the mini, and after groping, I finally switched handy....

First of all, you have to save the wireless network you need inside the phone, let's say you are at home now, open the function menu > Settings > Connection function > Bearer mode > Access point New access point....Then select your home's network and enter the password "The access point location is to the Internet.

Then change the priority The specific method: it is the bearer mode just now" Internet " Select the wireless network just saved " Options in the lower left corner " Organize " Change the priority Put in front of GPRS " to confirm.

So that your network is saved forever, press the previous one in the office, and set it up again once and for all!

The second step is to set up on the application Some applications do not support wifi and also set up a way But most of them like UC QQ support Open UC > settings "Access point switching" always asks so that every time you open UC, it will let you choose whether to use GPRS or your wireless network for the first time!

Many program access points can be set to always ask This is very convenient, but it seems that QQ does not always ask so every time you log in to Q, the location changes to the lower left corner of Q settings, pull down to the bottom, and the access point settings are changed to the current network or traffic You may have to log in again after the change, but it's also quite fast.

ps: mini comes with the browser access point do not change because it is the default wap not the internet you wap to use wifi can also be set once and for all mobile phone function menu "settings" "connection" "bearing mode" "Internet" select the wireless network (more than two wireless networks one by one) > options "sorting" copy ....> wap and then click to the wap of the bearer mode to change the priority (the wireless network should be placed in front of Montnet, the method has been mentioned above), just like that, in the future, even the browser that comes with it, it will automatically connect to WiFi, and automatically use Monternet if there is no WiFi.

As for how to determine whether it is traffic or wifi, it is very simple When using wifi, a triangle icon will appear in the upper right corner of the upper left corner of the traffic with the traffic will appear e It is recommended that there will be an Internet manager in it After you use the traffic to connect to the Internet, a traffic bar will appear in the upper left to facilitate you to manage the traffic.

Pure mobile phone hand-typed, personal experience, absolutely correct].

Just choose to change the access point in the software you are using, (each time it is manual).

If there is a connection to the GPRS network, an "E" icon will be displayed where the signal is displayed.

If there is a WiFi connection, a four-petal flower icon will be displayed at the top right of the desktop.

However, GPRS network and wifi can be connected at the same time, so if you use multiple software to connect to the network at the same time, you can't directly determine which access point the current software is using (when both icons are displayed), so you have to look at which access point the software is set up.

It should be an issue with the router. The phone can also be connected if you only turn on the router and do not plug in the network cable, but you can't get on the network. If you are sure that the wireless router is connected correctly, log in with the browser of the computer or enter the router control interface, and the username and password are admin to check the WAN port settings.

Changing the connection to a static IP should do the trick.

Do you need free wifi, some have to charge, and you have to enter a password account.

There is no wifi for licensed goods, only parallel goods are available.

The input address is invalid because of the network connection problem, the network connection is invalid will appear**invalid prompt is really not good, enter * Restore factory settings, go directly to the Internet to try I hope it can help you.

It is possible that the wireless network password is incorrect. This problem is the reason why you are not connected to the wireless network.

Set up the use of wifi connection on QQ also have to be set. Internet access also needs to be set up. This is set separately, not together, but it's useless to connect to wifi. It will only be useful after setting.

Restore the factory settings and fix everything.

Very simple. Main Menu Settings Connection Management Wi-Fi

Once inside, the hotspots in the range will be displayed.

Choose your own wireless hotspot and connect again.

Make sure the phone has wifi.

The Bank of China is only available in Hong Kong without wifi.

Turn on the wifi

McDonald's. Free hotspots are available at the airport.

If you can't find it, it means that there is no hot spot nearby.

If you find a lock on it, you can't get on it.

Because someone else encrypted.

If you have broadband at home.

You can buy a router.

Which router emits out of the hotspot to surf the Internet.

Turn on the wifi on the phone, the phone will automatically search for the network signal, there will be a prompt after the search, then you can use the Internet, but it is recommended that when you use the wifi to surf the Internet after searching for the signal, it is best to take off the SIM card or set offline on the mobile phone, because if the search period of the wifi continues, it will automatically switch to GPRS Internet access, the traffic at that time is amazing, and the cost is also amazing.

There is a detailed tutorial above. Just look at it.

The network settings are incorrect, or GPRS is not enabled, or CMWAP or CMNET is set.

Menu - Settings - Connection Functions - Wireless LAN - Select a Network - Start Browsing the Network.

Setup - switch access point with UC.

When there is wifi, the phone will automatically display,It will come out of your network,Then you click on the network you want to use,Click the left function key to connect if it is connected,It will be automatically stored in the access point,Open the software will let you choose,This is my own thinking,I was on it before,Save a bunch of access points,And,If you use the wifi signal or the original graphic does not display the signal transmission。

It could be that the local network is unstable, or it could be that the access point is set up incorrectly.

It should be the beginning of the month, and the phone bill is not enough to deduct the monthly rent, so the mobile to suspend the Internet service! It's good to charge the phone bill.

1. Turn it off and start it again.

2. Modulate the network settings, select only one access or each visit.

Settings, connection features, unlimited LAN. Find the wifi, and then hit the password, you can also set it to display automatically, and connect directly in the upper right corner of the phone next time.

Also, Nokia can't be unlocked with Magnum.