Which brand of solid wood floor heating floor is of good quality? Tell me about it.

How to choose flooring.

First, the planning before choosing the floor can not be less.

1. Household flooring is more cost-effective than floor tiles.

Flooring is the latest popular decoration material and is cheaper than traditional floor tiles. If you want to save money by decorating the floor, you also need to consider the decoration style at home and choose the right floor according to the decoration style.

Flooring and floor tiles are found throughout the renovation and maintenance process, and flooring is more cost-effective. If there is floor heating at home, if there is a problem, the floor is removed and repaired, and then assembled. The floor tiles have to be broken and re-paved, so that they need to be purchased again.

2. Reasonably plan the floor paving area and purchase on demand.

In order to reduce the waste of flooring in the decoration process, it is best to plan the area of the floor that needs to be used, plus the number of losses, and select it to prevent the waste of excessive floor purchase. Common laying methods for flooring: three, six, nine and one-half.

The paving method of 369 is a stepped gap structure, which usually saves materials, and the material loss is about 3%; The loss of one-half paving is the largest, about 5% higher, but the ground of this kind of laying is neat and symmetrical, and the visual effect is better.

3. Plan floor paving accessories to save money.

The accessories for floor paving include floor nails, headless nails, floor glue, moisture-proof mats, and door strips; If it is a keel floor, you need an extra keel, etc. It is the accessories of the floor that occupy a very important position in the paving of the floor, and most of the after-sales problems of the floor are directly related to the floor accessories. Therefore, choosing a good flooring accessories can save future maintenance costs.

I bought a solid wood floor heating floor from David Flooring, you can also check it out.

First, there are very few tree species in China's wood that can be used to make solid wood floor blanks, and although some can be made, the market is not recognized (such as colored wood and pentagonal maple). It can be said that China is highly dependent on imports in the blank. This requires the factory to have a strong financial strength to inventory, not to mention the occupation of funds, in addition to the large fluctuations in foreign timber, solid wood is greater, the floor industry is a low-profit industry, so it is impossible to allow enterprises to have a large area of solid wood blank inventory.

In addition, this market segment has a very small proportion in the whole floor market, so no flooring factory only makes solid wood flooring to become a national brand or a world-class brand.

Second, solid wood flooring is easier to deform than other floors in use, the durability is not as good as laminate flooring, and the stability is not as good as that of solid wood parquet. Coupled with the trouble of follow-up maintenance, the market share is actually very small. Some of the hardwood floors on the market are now in stock for several years.

Third, it is very not environmentally friendly, although the use of foreign wood (not our country) but to make a solid wood floor, the processing of materials and loss of a lot of materials, sensory use is actually not big (you will always see only the surface), which is really an unnecessary waste of increasingly tight forest resources. In my heart, it's similar to people planting trees in order to control desertification, and you go and cut them down one by one.

Fourth, in the face of advocating DIY, simple paving, simplifying the trend, solid wood flooring has higher requirements for paving, because the solid wood floor has no lock, once the keel pavement is not professional or the ground leveling deviation will cause a series of problems. As the saying goes, "three points of flooring, seven points of installation" means that it is not easy to install solid wood floors.

Fifth, the production of solid wood floor blanks is not what the public imagines are good wood blanks, wood is first divided into tree species subjects, followed by grades, solid wood floor blanks in the proportion of a material is very small, and expensive, most of them are BC level, the general CD level needs to be patched, we used to use wood powder and 502 patch board, after painting, you can't see it at all. The solid wood floor is easy to deform, and after a long time, the paint film will crack with the hidden dangers left by the patch, especially if the light is long or wet, it will be faster.

Sixth, solid wood flooring is particularly particular about the technology of drying and health care compared with other floors, which is generally divided into three stages: natural drying, artificial drying and balanced health, among which artificial drying of solid wood floor blanks is particularly important, which is not only drying kiln technology, but also has very high requirements for skilled workers. There is a misconception that heat-treated floors are "never deformed". In fact, this is not possible, and no matter how it is treated, it is inevitable that the moisture content of the wood will change below the fiber saturation point.

In use, the moisture content is not well controlled, for example, the moisture content is not the same across the country, that is to say, the solid wood floor produced in Shanghai is no problem to pave, and there may be problems with paving after being transported to Beijing.

Seventh, ** is more expensive than similar floors, and the so-called expensive and ** expensive here are not the same concept, because you will not take a ** to make a bowl for eating every day.

The use environment of geothermal floor is complex, especially in the northern region, the ground has to withstand various moisture in the non-heating season, and the ground temperature rises suddenly during heating, and the floor must bear the double change of "temperature" and "humidity". Therefore, the geothermal floor must be made of material with good stability. Teak is recognized as the most stable wood in the world and is recognized as the best solid wood geothermal flooring in and outside the industry, but at a higher price point.

Good environmental protection. This is the indicator that consumers are most concerned about, after all, it is related to health and safety of use.

Laminate, parquet, these all use glue, which is composed of formaldehyde and benzene. Composite flooring has formaldehyde volatilization, and now many diseases are caused by the volatilization of formaldehyde and benzene. No matter how good the environmental protection of laminate flooring is, it is difficult to withstand the repeated baking of geothermal heat.

Especially in the state of high temperature for a long time, high temperature will inevitably accelerate the emission of harmful gases, and the floor heating room is closed, and the indoor environment can be imagined. Hardwood flooring is pure and natural, and there are no environmental issues.

Good value for money. Hardwood flooring can be reused and is cost-effective, and teak flooring has the reputation of "once owned, benefited by generations".

At present, the multi-layer for imported geothermal energy is generally 10-15 years and 3-5 years for domestic ones. Solid wood flooring can be reused, especially teak flooring, the longer it is used, the better the stability, and the more beautiful it is. Teak has the reputation of "once owned, several generations of income", if you like it, you can use it for your children and grandchildren to continue (pass on), and it is not difficult to understand those teak palaces, temples, and luxury oil tankers that are still well preserved for hundreds of years and thousands of years.

Excellent thermal conductivity. Wood is a good natural material, the ground heat is transferred to the surface through the floor, there will inevitably be heat loss, the ideal floor is to take into account the good foot feeling on the basis of these losses can be controlled within a reasonable range.

Multi-layer solid wood is 12-15mm thick, and solid wood is 18mm thick. The thickness difference of 3-5mm, some people believe that the thermal conductivity of solid wood is not as good as that of multi-layer solid wood. Practice has proved that pure solid wood is no less than multi-layer solid wood in thermal conductivity, first, the thickness difference is very small; Second, the multi-layer is the layering of solid wood veneer and glue, which has a higher thermal resistance coefficient especially for glue.

Moreover, the geothermal installation is directly installed on the geothermal layer, there is no air resistance problem, and the thermal resistance coefficient of air is the highest, so if it is installed with a traditional keel, there is an air resistance problem.

Good heat retention. Solid wood itself is a temperature control body that is warm in winter and cool in summer. The insulation effect of pure solid wood goes far beyond that of solid wood composite and laminate flooring.

The wooden floor of the brand of floor heating is good, it is recommended: after the installation of the floor, try to avoid walking for at least 48 hours within 24 hours before moving into the hanging object. Keep the wooden floor dry and clean, wipe the wooden floor with a soft damp cloth that is spun dry, in the dry area of the north, you can use a wet rag to scrub the wooden floor during the drying season, and in the humid environment of the southern climate, it is not suitable to wipe the floor with a wet mop or clean it with direct tap water.

In the area of paved flooring, the volume and weight ratio do not have to be placed symmetrically, so as not to affect the random expansion of the wooden floor.

In order to maintain the beauty of the wooden floor and increase the service life of the car paint, it should be waxed every two months, the dirt should be cleaned before polishing and waxing, and then a layer of floor wax should be evenly wiped on the surface, and a soft rag should be scrubbed with a soft rag until it is smooth and bright. When carrying furniture, it is not suitable for mopping, and it is not suitable to use iron furniture legs to directly touch the surface of the wooden floor; Shock-absorbing rubber pads can be added to areas that come into contact with the wooden floor, such as tables, chairs, benches, and benches, to reduce the level of friction against the floor.

Prevent obvious long-term sun exposure to wood flooring, in order to prevent premature aging and cracking of paint under ultraviolet radiation for a long time. Prevent electrical products from blowing hot and cold air and baking wooden floors. When going out, please close the doors and windows to prevent precipitation and direct sunlight, and wipe the water on the floor if you accidentally pour it on.

If there are oil stains, you can use a towel or mop dipped in warm boiled water and a small amount of soap powder to clean it; In the case of drugs or color pastes, they must be removed before the stain has been incorporated into the wooden surface.

If the wooden floor is not used temporarily, it is necessary to pay attention to adjusting the indoor air humidity and not to cover it with stuffy raw materials for a long time; It is forbidden to touch the wooden floor with fire or place a high-power electric water heater directly on the floor. When applying in the natural environment, the temperature should be raised and lowered gently, and no quenching or sudden heat should be acute. The ambient temperature on the surface of the wooden floor should not be higher than 27, and it is advisable to increase the ambient temperature by 3 -5 °C per day for the first application of each year.

In the room that cannot be used for a long time, it is necessary to put a few plants of water in the room and maintain the water flow, or use an industrial humidifier to fill the volatile moisture in the room, and the indoor air should not be too dry or too wet and cold, so as to prevent cracking, expansion or surging deformation of the wooden floor.

Wood flooring brand suitable for floor heating: Tiange solid wood Tiange floor heating solid wood floor is an expert and leader in floor heating solid wood flooring, is the first responsible drafting enterprise of national standards, the brand won the 19th China Patent Award, and is the inventor of floor heating solid wood flooring. Tiange flooring products have the characteristics of bright color, strong wear resistance and solid structure.

You can choose Tiange, pay attention to the hardness, choose a relatively high hardness, you can use it better.

Try not to use wooden floors, it is better to choose tiles, which will avoid many problems, which may show some deformation.

1. Nature floor. Nature is a famous brand in China, China's 500 most valuable brands, has a high reputation in the industry, after years of development, nature has occupied a very important position in the industry, and the company has now become one of the drafting units of national standards in the flooring industry.

Natural Wood Flooring Solid Wood Flooring Home White Oak Nature Logs Nordic Wood Home Wearable Cold Grey 8053 Models Activity 1

JD.com. Purchase.

2. Icon floor. Founded in 1995 and headquartered in Shanghai, Shengxiang Group has always stood at the forefront of the industry for 17 years"Professional quality, trustworthy"The core values of the brand and"Carried with love"The brand concept has been created one by one"First", leading the development of the entire industry.

3. Living home flooring. Living Home is a company dedicated to meeting the needs of consumers around the world for home wood products. It is a patent holder for antique flooring in China, with three major brands: Living Home, Living Home Baroque and Living Home Mannington, and its business scope covers parquet flooring, antique flooring, laminate flooring, ecological flooring, solid wood flooring, wooden doors, real wood wall decorations, floor substrates, accessories, etc.

4. Fillinger flooring. In 1921, Fellinger was founded in the German state of Baden-Württemberg. Over the past 80 years, Fillinger has gradually developed into Europe's largest manufacturer of interior furniture for station wagons, a supplier of interior wood products for Mercedes-Benz and other famous automobile companies and a supplier of famous furniture intermediate products, enjoying a good reputation in the wood industry and holding several important patents, and gradually developing into a home furnishing brand covering the full line of indoor civil wood products.

Fillinger flooring, multi-layer solid wood composite wear-resistant living room, bedroom wood flooring, household floor heating, floor heating flooring, Youxiang L02, bare board, L02 1

JD.com. Purchase.

6. Anxin flooring. Anxin Weiguang is an end-to-end vertical integration enterprise integrating the advantages of raw materials, procurement, processing, finished products, circulation and sales, with product lines including solid wood, multi-layer solid wood, laminated series flooring, and the development and production of tempered floor heating solid wood flooring, art flooring, parquet flooring and bathroom flooring, outdoor flooring.

After the introduction, I believe that we have more knowledge and understanding of these solid wood flooring brands, in the purchase of solid wood flooring can be considered from the floor texture, color, sealing, paint smoothness, ** and other aspects, I hope that in the introduction of solid wood flooring brands can allow you to choose a suitable solid wood floor.

How to choose a plank? There are many brands of household solid wood flooring, and the quality is also uneven, so when choosing a solid wood flooring brand, we must pay attention to product quality, and we can give priority to first-line brands such as rabbit babies, because the products of first-line brands will have a good guarantee in quality and service. In addition, you should also pay attention to the following points when choosing solid wood flooring:

1. When choosing solid wood flooring, you should also pay attention to the thickness of the solid wood floor, whether it is consistent with the packaging of the merchant.

2. When purchasing solid wood flooring, it is necessary to take into account the factors of the indoor environment, if the indoor humidity is relatively large, then it is necessary to choose white pine, red pine, catalpa wood flooring, which is not easy to deform after being damp.

3. When purchasing solid wood flooring, it is necessary to take into account the size of the laying ground, if the area is small, it is better to choose a small size wooden floor.

In addition, when buying solid wood flooring, try to choose UV lacquered board, which is more resistant to scalding and wear than other floors. How to choose a good flooring for the home:

The choice of flooring should be based on your actual situation, and the following will introduce you to some knowledge about flooring.

First, the classification of laminate flooring.

At present, there are two main categories of laminate flooring on the market: one is solid wood parquet; The other type is laminate flooring. These two types of laminate flooring have their own different characteristics and have different requirements in terms of use and maintenance.

Hardwood parquet has the advantages of beautiful and natural solid wood flooring, comfortable foot feeling and good thermal insulation performance; It also overcomes the shortcomings of the solid wood floor due to the shrinkage of the monomer and the easy warping cracks. Nowadays, in order to prevent the deterioration of the living environment, countries around the world generally attach importance to the protection of forest resources, and parquet can save rare wood resources compared with solid wood flooring. In addition, parquet is easy to install, and there is generally no need to tie the keel.

But the ground leveling is required.

Parquet can be divided into three categories: three-layer parquet, multi-layer parquet, and blockery.

The three-layer structure parquet is formed by staggered lamination of three layers of solid wood, and the surface layer is made of high-quality hardwood slats, and the commonly used tree species are ash, birch, beech, oak, maple, cherry, etc. The middle is a cork slat, and the bottom layer is a rotary cut veneer, arranged in a criss-cross pattern. Such a structural composition makes the three-layer parquet not only have the advantages of ordinary solid wood flooring, but also effectively adjust the stress between the woods, and improve the shortcomings of the wood with the large change of dry and humidity in the season.

The solid wood floor has a good foot feel, natural texture and color, and slightly worse hardness. And because it is natural, the texture and color are quite different, and the wooden keel needs to be played when paving, which is relatively high.

The high-laminate flooring has high hardness, good wear resistance, simple and convenient paving, and is low, but the foot feeling is slightly worse.

Parquet absorbs the advantages of the above two, ** in between, but the hardness is the worst of the three.