How to install the fan, how to install the fan

Tool materials required: electric fan, screwdriver.

1. Disassemble the express and place the parts neatly.

2. Start the installation and install it from the base network.

3. Install the machine head.

4. Install the fan blades, pay attention to remove the two fixing buckles first.

5. Install the back cover, fan blade, and front cover.

6. When installing the fan blade, pay attention to the clamping of the fan blade groove and the rotating rod.

7. Install the fixed clamp.

8. Turn on the power supply and check whether the wind level, shaking head and other functions are normal.

Answer 1: Open the package and take out the corresponding parts; 2. Assemble the pole, unscrew the nut on the pole, connect the two rods together, and fix the nut; 3. Install the chassis, unscrew off the bottom of the screw at the bottom of the pole, insert the rod into the hole in the chassis, and tighten the bottom of the screw; 4. Take out the upper part of the electric fan, insert it into the pole, fix it with screws, and tighten it; 5. After fixing the upper half, unscrew the nut of the upper half;

Questions and answers. 1. Open the package and take out the corresponding parts; 2. Assemble the pole, unscrew the nut on the pole, connect the two rods together, and fix the nut; 3. Install the chassis, unscrew off the bottom of the screw at the bottom of the pole, insert the rod into the hole in the chassis, and tighten the bottom of the screw; 4. Take out the upper part of the electric fan, insert it into the pole, fix it with screws, and tighten it; 5. After fixing the upper half, unscrew the nut of the upper half;

Ask if there is any**.

Asking questions is not such a fan.

<>1. First of all, check whether the parts in Figure 1 below are two pieces, and the white POM parts can be removed. Let's take these two apart first.

2. Place the position of the part of Figure 2 in Figure 4, and the notch position of the part in Figure 2 is aligned with the screw position of Figure 4.

3. Attach the page of Figure 3.

4. After disassembling the white parts in Figure 1, there should be a lock screw hole on the surface of the white parts, use screws to fix the white parts in Figure 1 at the position of Figure 5, and then snap the orange parts on.

Remove the two screws from the fan in Figure 1 and attach the white parts in Figure 2! Notch align the screw mouth, and then add the screw!

Next, install the fan blades!

Finally, install the fan blade cap and you're done!!

Where did you buy it? Ask customer service.

Installation of the chassis cooling fan:

1. Generally, our fans are installed in the fan port of the case.

2. It is not recommended to install a fan in the front position, because it is far away from the CPU, and the wind speed has dropped very much when the airflow reaches the vicinity of the CPU, and the effect is not ideal. So it should be installed behind the chassis.

3. A fan has 4 corners, and it is also the 4 corners of the fixed fan, which are generally fixed with screws.

4. After fixing, you can connect the fan cable. It can be connected to the motherboard or written to the power supply. First of all, the power supply on the motherboard is very reasonable.

When you see a pin, you can plug it in. Definitely not burning the computer. Just connect the cable on the motherboard to the third on the motherboard.

If not, connect to a power source.

The cooling fan in the computer has an impeller collar cover on the front, the blades are facing downward, and the impeller bearing supports the skeleton on the reverse side. There is a fan specification label on it, and the impeller bearing chamber is torn off.

CPU cooler is specifically designed to provide heat dissipation needs for the CPU, so the importance can be imagined, CPU cooler installation is not difficult, especially the down-blowing radiator, but for the tower side-blown CPU cooler, the fan orientation needs to be installed correctly to better heat dissipation.

Proper use of cooling fans.

The correct use of the cooling fan can not only improve the efficiency but also prolong the service life, so we need to pay attention to the cooling fan to operate in a suitable temperature environment, pay attention to the choice of bearing is oil-containing or double-ball, the service life of the ball will be as long as two-thirds than the oil-containing one, and the voltage of the cooling fan can not exceed the rated voltage of the fan.

Usually pay more attention to the maintenance of the cooling fan, maintain the cooling fan, clean it, then the life will be extended. The above is a brief introduction to the correct use of cooling fans, although most of the cooling fans are used in the equipment, but the fan is also a very important accessory, which can improve the efficiency of the equipment.

This can be directly put on the buckle of the radiator, and the round one is not used.

It depends on which platform your motherboard is, I remember that the motherboard of different platforms corresponds to different installation methods, anyway, it is not difficult, the heatsink you bought should have a tutorial, it really doesn't work you ask the merchant.