What is a system exception and what is a system exception?

This should be a network problem or a system problem.,If the amount is still there.,Try a few times.,If it doesn't work.,Just wait until the next day and it will be restored.,Thank you.。

Hardware:

Generally speaking, the possibility of memory problems is not large, the main aspects are: the memory module is broken, the memory quality is problematic, and there are two different brands of memory with different capacities, which is also more likely to be incompatible, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking. You can use memtest to check the memory, which can thoroughly detect the stability of the memory.

If this problem occurs when you have dual memory, and you are mixing different brands of memory modules or buying second-hand memory, you should check whether there is a problem with the memory or it is incompatible with other hardware.

Software: Let's briefly talk about the principle: there is a place in the memory called a buffer for storing data, and when the program puts the data in one of its positions, because there is not enough empty.

Problem Causes: Causes: Solutions.

The memory module is broken Replace the memory module.

Dual memory incompatibility Use the same brand of memory or only one memory.

Memory quality issues Replace memory modules.

Heat dissipation issues Enhance heat dissipation inside the case.

The memory and motherboard are not plugged in properly or are not compatible with other hardware, etc.

There is a problem with the hard drive Replace the hard drive.

Driver issues Reinstall the driver. If you are using a new system, you need to install the motherboard driver first.

Software corruption Reinstall the software.

If the software has bugs, patch or use the latest version.

Software and system incompatibility Patch the software or try the system's compatibility mode.

There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

Virus Problem: Antivirus.

Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

There is a problem with the system itself Sometimes the operating system itself will also have bugs, so you should pay attention to installing the official upgrade program, like the patch of SP, it is best to put it on. If you can't reinstall the system or replace it with a different version of the system.

When running some programs, sometimes a memory error message appears, and then the program is closed. I believe everyone should have seen the above situation, and even said that some users repeatedly reinstall the system because they don't want this error message to appear often.

Let's talk about the hardware first

Generally speaking, computer hardware is not easy to break. There is not much chance of a problem with the memory, the main aspects are:

1. The memory module is broken (second-hand memory is the majority).

2. The memory with quality problems is used.

3. There is too much dust on the gold finger part of the memory plugged into the motherboard.

4. Use different brands of memory with different capacities, resulting in incompatibility.

5. The heat dissipation problem caused by overclocking. You can use some testing software (such as memtest) to check the memory, which can thoroughly detect the stability of the memory.

Second, if there are none, then troubleshoot from the software side. Let's talk about the principle first: the place where the memory stores the data is called the buffer, when the program puts the data in the buffer, it needs the "function function" provided by the operating system to apply, if the memory allocation is successful, the function will return the newly opened memory area address to the application, and the application can use the memory through this address.

What is a system abnormal, the system is abnormal, then it can't be used normally, if the operating system is abnormal, then it is a system crash, only reinstall, if the software prompts, then upgrade the software, or reinstall the software to the latest version can be used, so the system abnormality is not normal use.

Usually this is the case where the IP of your computer is specified, and then other users in the same LAN also specify this IP and then the IP conflicts.

The system abnormality is due to the crash of your mobile phone or computer system, which causes it to not work properly, at this time the system has completely failed and you need to replace the device.

The system is to manage all the hardware resources of the computer or mobile phone system, including software resources and data resources; control program operation; improve the human-machine interface; Provide support for other application software, etc., so that all the resources of the computer system can be used to the maximum extent, and provide users with a convenient, effective and friendly service interface.

The system is to manage all the hardware resources of the computer or mobile phone system, including software resources and data resources; control program operation; improve the human-machine interface; Provide support for other application software, etc., so that all the resources of the computer system can be used to the maximum extent, and provide users with a convenient, effective and friendly service interface.

Check whether the antivirus software has killed the virus, you can determine, whether it is caused by the computer system poisoning or malware, if there is a virus, it is recommended to use a combination of antivirus software to kill the virus, or if it doesn't work, reinstall or restore the system, you can solve it.

3 If the computer has a discrete graphics card, the power supply is not enough, then you can only change to a higher power power supply, the power supply has been used for a long time, unstable, then you also need to change the power supply to test.

4 Shut down, touch the south bridge, north bridge chip, graphics card chip of the motherboard with your hands, if it is very hot, it is likely to be broken and need to be repaired.

The reason why the computer shows the system abnormality:

1. Memory reasons: The phenomenon of this fault caused by memory is more common, and this kind of failure is generally caused by poor chip quality, but sometimes we can solve the problem by modifying the delay time Cas in the CMOS setting (changing it from 3 to 2), if not, we can only replace the memory module.

2. Motherboard reason: The probability of the fault caused by the motherboard is slightly lower than that of the memory, generally due to the motherboard, after such a failure, the computer will generally not crash after the blue screen, and the failure occurs frequently, so the only way to replace the motherboard is to replace the motherboard.

3. CPU reasons: This kind of failure is relatively rare due to CPU reasons, and it is generally common on the CPU of Cyrix, for which we can reduce the CPU frequency to see if it can be solved, if not, there is only one way to replace it.

Solution: 1. Determine whether it is a software compatibility problem, confirm whether some specific software has been installed recently, this problem has occurred, the method is to view in the control panel, and then uninstall to observe whether the situation will still occur.

3. Confirm whether there is a system upgrade, and the system will fix the bug and improve the system every time it is upgraded. From the start menu to enter the settings - system update to check,Here to declare a personal view of the system update,Whether mobile phone or computer there are many people who ask whether to upgrade,Mine is sure,System upgrades are the embodiment of the improvement,Optimization。

4. Restore or roll back.

When the problem is not solved, back up the main data, and then restore the system, if the recent upgrade of win10 can also restore the last system (can not delete the C disk, otherwise it cannot be rolled back).

5. Reinstall the system.

Many times the system problems that cannot be solved can be solved by reinstalling the system.

1.Determine if this is a software compatibility issue and verify that specific software has recently been installed before this issue occurs. The way to do this is to check the control panel and then remove it and observe if this happens again.

2.Identify driver compatibility issues. Once the win10 installation is complete, the driver installation will be completed automatically.

In this case, you can use your driver management software to detect updates or roll back older versions. 3.Check whether there is a system upgrade, and each system upgrade will fix bugs and make improvements to the system.

First find Start on the computer, then click Start, then find Run in the start interface, then enter msconfig in the run, and then click Enter, in the pop-up interface except ctfmon, cancel all the checkmarks, and finally click Save, restart the computer, and you can restore the system. Generally, most of the problems in the system are due to the fact that the user has too many open runs in the process of using the computer, or there are file conflicts.

When a computer has a system failure, it may be because there is too much software running in the background of the computer system, resulting in an abnormal computer system. Moreover, the computer system will malfunction due to other reasons during the use of the computer. For example, during the use of the computer, there is poisoning or malicious software, resulting in the failure of the computer system.

It is also possible that the computer's fan is broken, causing the computer's CPU to be too high and unable to dissipate heat normally, causing the computer system to automatically start overheating protection. Therefore, if the user finds that there is a problem with the system during the use of the computer, he can enter msconfig in the operation and close the operation in the background of the system.

1.Determine if there are software compatibility issues. Make sure that some specific software was recently installed before this issue occurred.

Check in the Control Panel, then uninstall, and observe if the status reappears. 2.Identify driver compatibility issues.

Check if there is a system upgrade. Every time the system is upgraded, bugs are fixed and improved.

1.Determine if this is a software compatibility issue and confirm that specific software was recently installed prior to the issue. The way to do this is to check the control panel and then uninstall and observe if this happens again.

2.Assessment of driver compatibility issues. Once the win10 installation is complete, the driver installation will be completed automatically.

Every time the system is updated, the bugs will be fixed and the system will be improved.

1.Determine whether it is a software compatibility issue. Before the problem occurs, check if any specific software has been installed recently.

The way to do this is to check the control panel and then uninstall it and observe if this happens again. 2.Determine driver compatibility issues.

Check if there is a system update. Every time the system is updated, the bugs will be fixed and the system will be improved.

Looking at the content of the question, it should be completely uncomputer-based. In this case, the easiest way is to ask the young people around you. If you want to deal with it yourself, the easiest way is to use 360 Security Guard to try the system automatically if you have 360 in your computer.

It's not advertising for 360, it's just because the installed capacity of 360 in China will be relatively high. There is also a possibility that 360 and Tencent Computer Manager have a conflict. Keep only one, and removing one of the other anti-virus software, security guard, or PC Manager may solve the problem.

The computer shows that the system is abnormal, you can try to press the F8 key to boot up, after the selection menu appears, select the last correct configuration to start, try to fix the system abnormality, if not, according to the specific situation is that the system is abnormal, targeted processing, no, you can also redo the system.

<> causes: 1. The number of sick people is destroyed by poisonous Trojans.

2. Applications.

Missing or damaged components. Aftermath.

3. The components on which the program depends are lost or damaged.

4. Software conflicts.

5. Hardware failure.

Solution: 1. First eliminate the cause of the virus and use antivirus software.

Quickly scan and kill for 3 to 5 minutes, and click to process immediately according to the inspection results.

2. Query which system component is damaged according to the component, reinstall the relevant component, and restore the program file.

It can be solved in general.

3. Reinstall the software.

<> causes: 1. Virus Trojan damage.

2. Application components are missing or damaged.

3. The components on which the application depends are lost or damaged.

4. Software conflicts.

5. Hardware failure.

Solution: 1. First eliminate the cause of the virus, use antivirus software to quickly check and kill for 3 to 5 minutes, and click on the banquet hall to deal with it immediately according to the inspection results.

2. According to the component, query which system component is damaged, reinstall the relevant component, and restore the program file, which can generally be solved.

3. Reinstall the software and hide it.

Summary. Press the three keys (Ctrl+Alt+Del) to restart the computer processing, however, after pressing it, it will return to this realm.

There is also an anomaly that when installing, remember to install it on the C drive, and it turns out that the operating system is installed in the USB flash drive. The reason for this is that because of the U disk PE system, the disk letter is a little out of order, when installed.

Some installation operating system abnormalities are due to the use of optical disc installation, and the optical disc is easy to scratch, or the head reading error, resulting in some files can not be read to the hard disk normally, so the installation fails, at this time.

There is also a situation where an error occurs when using a tool such as one-click restore to install the clone version of the file, and the biggest possibility is that the path or installation file uses Chinese and the like is not recognized by this hard disk installation tool.

The computer system is abnormal.

Press the three keys (Ctrl+Alt+Del) to restart the computer processing, however, after pressing it, it will return to this realm. There is also an anomaly that when installing, remember to install it on the C drive, and it turns out that the operating system is installed in the USB flash drive. The reason for this, because of the fate of the U disk PE system, the disk letter is a little out of order, and some of the installation operating systems are abnormal because of the use of optical disc installation, and the optical disc is easier to scratch, or the head reading error, resulting in some files can not be read normally into the hard disk, so the installation fails, at this time, there is also a situation when using tools such as one-click restore to install the cloned version of the file error, The biggest dispersible companion is that the path or installation file using Chinese is not recognized by this hard disk installation tool.

1.There is a virus in the computer2There is a software conflict3

There is a bug in the software itself4Other systemic reasons such as: The supporting dll expansion collapse file has been corrupted, etc., you are so general and uniform, it is difficult to judge that there is a problem, check this Qiji system log --> at the start --> run --> input:

Enter--> opens"Event Viewer".Wait for the scan to load the log and manage it"Yes"If there is a red error item, double-click it to see the specific error message. Then, the error message is corrected accordingly.