Can you put two routers at home

You can do a bridge to log in to the management interface of wireless router B, and set "SSID number" and "channel" in wireless settings - basic settings

For the configuration of routers A and C, select WDS mode as Repeater Mode in Wireless Settings --WDS Settings. Click "Scan", search for the surrounding wireless signals, select the SSID number of router B in the list of scanned signals, set the channel to be the same as router B, set the encryption information to be the same as router B, and save.

Modify the IP address of the LAN port. In the Network Parameters -LAN port settings, modify the IP address to be different from that of the B router (to prevent IP address conflicts), e.g., save, and then log in to the router's management interface again. Shut down the DHCP server.

In the DHCP server, enable the checkbox in the DHCP server in the "Remove, Save, Restart Router". Wireless Router C settings. The steps are the same as those of Wireless Router A, but when you change the IP address of the LAN port, make sure that the modified IP address does not conflict with existing devices or computers on the network.

This is one of my 3 routes to do the bridging steps, you set a b 2 on it.

If you want to log in to the same network account, it is not possible, or it is more cost-effective to pull a network cable from the router to the upper floor.

Buy an external high-power wireless network card and your wifi is also very strong on the 6th floor, I hope you.

A wireless router can be used, and if the signal is not good enough, it can be bridged. .

Hello. Two wireless routers can be installed.

For home use, you shouldn't want to pull the network cable either.

The two wireless routers can be connected using a bridged connection.

It is recommended that you buy the second router and the first router of the same brand and model.

You can install two routers at home.

Method: 1. Connect the two routers with network cables. Prepare a network cable, and connect one end of the network cable to any interface in the LAN of router 1. The other end of the network cable is connected to the WAN interface of Router 2.

The computer is connected to any of the LAN interfaces of router 2 with a network cable, as shown in the following figure

2. After that, connect a network cable from any LAN port of router 1 to the LAN port of router 2 (the WAN port of router 2 is left empty and not plugged in the network cable).

3. After setting, the two routers can be used at the same time (no additional settings for router 2 are required).

4. In addition, please set the IP address to "Auto Acquisition" for this method.

A wireless router is a router that is used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna.

It is possible to install two routers at home, and now with the improvement of housing conditions, most families are installing more than two routers to solve the problem of wireless network coverage at home. If you want to install it, you can purchase a router for installation, or you can purchase the operator's intelligent networking value-added service and have it installed by the operator.

Specific steps to install the router:

1. After unpacking the router you bought, put it next to the optical modem or broadband network cable interface, and turn on the power supply. Then connect the network cable from the LAN interface and network port of the optical modem to the WAN port or WAN and LAN interface on the router.

2. On the sticker at the bottom and back of the router, find your router's default wifi name and password, and login address (management address).

Some routers' default wifi network vibrator friends Luluo do not have a password, the mobile phone can be connected directly, some routers' default wifi has a password, the default password can also be viewed on the sticker of the router, please check it yourself.

3. Connect your phone to the wifi network you see in step 2.

The mobile phone is connected to the default WiFi network of the router, which is a normal phenomenon, please do not worry. Because when you install and set up a router with your phone, you don't need your phone to be on the Internet. <>

The following describes how to set up a wireless router to connect a wireless router to another wireless router

1. How to set up the main router:

1. Plug the network cable (bus) into the WAN port of the wireless router, plug one end of the network cable into any LAN port of the wireless router and connect the computer network card at the other end, and turn on the power supply of the router.

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the wireless router setting interface, select the Internet access method according to the setup wizard (different broadband options are also different), and enter the Internet access and password.

5. Save and continue to set the wireless key, (the password is recommended to use a combination of numbers and English, and it is best to use the @ symbol in the middle, so as to prevent others from rubbing the net).

6. After saving, you can surf the Internet normally.

7. If it is abnormal, you may wish to click the reset button of the wireless router and set up the router again.

Second, the setting method of the secondary router:

1. Do not connect the secondary router to the main router first.

2. One end of the network cable is connected to any LAN port of the secondary router, and the other end is connected to the computer.

3. Change the LAN port IP of the login interface through the computer browser to avoid conflicts with the IP segment of the main router.

4. WAN port Internet access mode selection: dynamic IP connection, enable DHCP server.

5. Wireless settings and keys, save and exit.

6. Connect a network cable from any LAN port of the main router to the WAN port of the secondary wireless router, and the computer can access the Internet at this time.