How to remove the keycaps of an ASUS laptop I m from the F8 series

There are 2 buckles on the left and right under the keycaps, and when you press them in at the same time, the keycaps can be detached.

If you can't see clearly, you can take down the entire keyboard, and there are 4 buckles above the keyboard that are interlocked with the main body. Be careful with the cable underneath the keyboard.

How to remove the keycaps of a notebook.

If the wiring gets wet, it is useless to remove the keycaps. Because in the case of the common X-shaped key, it is fixed in the slot by 4 small clips, remove the keycaps, except for the 4 card slots, it is a leather bowl similar to an ordinary keyboard.

So I don't think there's much to do when you take it apart. It is better to patiently use the external keyboard for a few more days and wait for the keyboard to dry naturally.

That is, of course, if you're spilling water, not sugary drinks like Coke.

How to disassemble a key on a notebook keyboard.

The keyboard is all detachable.

If you don't dare to do it, just press it directly, it should be okay The following is the buckle principle.

How to remove the keycaps of Lenovo notebooks.

Lenovo notebooks now have two mainstream keyboards, one is a chocolate keyboard, and the other is a traditional keyboard. Both keyboards have a similar structure underneath, with scissor-like brackets used, and keycaps can be removed by moving a corner directly with a nail sled. However, be extra careful not to break the bracket when installing.

This one is not a good match.

If you don't have experience, don't disassemble it, the cost of replacing a piece of keyboard is not low.

How to remove the keycaps of ASUS notebooks.

Press down and push up We repair notebooks generally directly down.

When you install it, press it down, push it down, and you hear a click and put it on.

How do you remove the keyboard from a laptop? I want to wash it?

It would be difficult to remove the keycaps.

If you disassemble the keyboard, a few screws on the back and a few bayonets on the keyboard will come down when they are opened, but the capacitors are all together. So it can't be washed.

It is recommended to use a notebook cleaning solution and carefully wipe it with a 3M rag.

How to take down the notebook keyboard sticker.

Blow hot with a hair dryer to let the glue melt a little easier to tear.

How do I remove the keys from the keyboard?

Use a flat-neck screwdriver and pry it gently, don't use too much force.

How do you remove a laptop keyboard?

You can remove another one, this one is carefully observed, the bracket under the keyboard, from the side is the letter X shape, and then install, a little harder, I hear a click, that is, it is installed, don't work too hard, it's easy to break.

How to remove the keyboard keys of Lenovo notebook.

It is recommended to send it for replacement, and you can do it yourself, but it will be a little bit, and you will actually buy a keyboard, and you will change it for free.

Is it out of insurance? To pass the left hand to take a small change cone against the left or right small mouth that has a buckle), in the use of another change cone to pick up the keyboard. Then pick them up one by one and take down the keyboard.

The keyboard is two buckles that bite each other, and you need installation experience to install it well, and there is a front and back, up and down order. It is recommended that you go to an ASUS service center and have an engineer help you install the keycaps, which is safer and will not damage the keyboard and buckles.

1. When installing, observe the inside of the keycap, there are two pairs of claws, the spacing between the two pairs is different, and see if the plastic on the keyboard is damaged during installation.

2. Buckle a pair of small claws with small spacing between one end of the keycaps into the plastic.

3. Then the keycaps are flattened and pressed by hand.

I'm off the key, now let's talk about the steps.

First, put the two black plastic parts on.

The correct installation should be able to fasten the two perfectly.

Then fasten to the keycaps according to the pattern.

Then snap it on the keycap holder and attach the correct style to the keycap holder.

I've just learned that too, so I recommend watching this.

It is very important to step 3, many tutorials on the Internet have been skipped without details. Remove the keycaps first, then install the X-frame, then press the keycaps horizontally. Among them, the installation of the X architecture is very important is that the two brackets must be pressed in a plane, and the two brackets can fit in a plane, and then the keycaps can be pressed, otherwise one side is warped and the other side is low.

X-shaped bracket, just press carefully along the bottom axis to become I. The picture below is after pressing.

Press your index finger on one side of the bracket in the picture below, and slowly exert force, the other side of the bracket will be pushed out of the groove marked in red, and the other bracket will be simple, and it will come out with a slight pull up.

In order to avoid affecting the subsequent warranty of the machine, it is recommended to bring the machine to the local ASUS service center for engineers to assist in dismantling or replacement.

Inquiry method of the nearest ASUS service center: Duan Zhao enters the ASUS official website - scroll down to the bottom of the page - service and support - ASUS service center query.