-
Anonymous users2024-02-07Hello, you can try to uninstall the current network card driver, restart the computer and reinstall it, the driver of the Lenovo computer can be searched by the host number of your computer on the Lenovo Think official website service**.
-
Anonymous users2024-02-06You go to the official website and reinstall the driver of the next Ethernet and router to see if it is a software problem.
It may also be an IP conflict on the network, which I encountered just now, and there is an exclamation point when connecting. Later, after disabling the local connection, I re-enabled it a few times.
If it's a hardware problem, it is estimated that you will not be able to connect once.
If the interface light is on, it is generally not a hardware problem. After connecting, it will show that 100m is connected to a local connection and so on.
Your problem may be a software issue. If it still doesn't work to activate it after deactivation, you can go to the think official website to re-install the driver and take a look.
-
Anonymous users2024-02-05Dear Lenovo users, if the yellow status light does not flash, it means that there is no data transmission on the computer network, you can try to uninstall the network card driver of the computer, restart the computer and reinstall it, if it is invalid, it is recommended that you check whether there is a problem with the router device or the broadband modem.
-
Anonymous users2024-02-041) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.
2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. After there is a factory reset, it can be used from the new settings (this is on the premise that the physical connection is correct).
If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.
3) If it is caused by a system problem, it is recommended to restore the system or reinstall it.
4) If you turn off the wireless switch, just turn it on, if it is a wireless connected by software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.
5) If you have any questions, please ask me.
-
Anonymous users2024-02-03Dear users, hello!
Here's how you can do it:
1. Right-click the network icon, select the troubleshooter to take a look, if there is a repair option, fix it 2, start - all programs - accessories - open the attachment right-click command prompt (administrator), and then enter execute:
netsh int ip reset enter.
netsh winsock reset, the return is executed, and the reboot is executed.
3. Uninstall and reinstall the Ethernet card driver to find it, uninstall it in the control panel, uninstall it in the uninstaller program, generally start with realtek ethernet, right-click to uninstall, restart after uninstalling, install the latest driver after restarting. Drive lookup.
4. Restart the router and try it.
-
Anonymous users2024-02-02Dear users, hello! Blind reed.
Here's how you can do it:
1. Right-click the network icon, select Troubleshooter to take a look, if there is a repair option, fix it.
2. Start - All Programs - Attachments - Open the attachment right-click Command Prompt (Administrator), and then enter Execute:
netsh int ip reset enter.
netsh winsock reset carriage return.
The restart is complete.
3. Uninstall and reinstall the Ethernet card driver to find the driver.
Uninstall in the control panel,Uninstall in the uninstaller,Generally the realtek ethernet starts,Right-click to unload the coarse load,Restart after uninstalling,After restarting, install a stool as follows the latest driver。 Drive lookup.
4. Restart the router and try it.
What is the broadband speed? How many m's?
Signal forwarding can cause the network to be too slow, but this is only a small factor. >>>More
I want two threads.
The wiring sequence is. >>>More
1. There are two ways to network cables, one is the cross line, the other is the parallel (straight-through) line 2, the practice of the cross line is: one end adopts the 568A standard, the other end adopts the 568B standard 3, and the parallel (straight-through) line is the practice of the 568A standard or 568B standard at both ends, (the practice of the 568B parallel (straight-through) line is generally used). >>>More
You're talking about network cable bars, ** have, to the computer city, where computers are sold, I think the telecommunications bureau should have it, the price is expensive and cheap, there are 1 yuan a meter and 2 to 3 yuan a meter, depending on how you buy it. In fact, 1 yuan a meter is very good. But it's also oh.,You should also pay attention to rest when playing on the computer.,I think your parents are distressed when they see you not resting.。
You need to set the dial-up type and enter the password for surfing the Internet. >>>More